PLCforum.uz.ua

Hi,

is it possible to install 800xA on a 64 bit operating system?
What parts are easy to install and which not?
Does anyone have experience with 800 xA and Windows 64 bit?
What conditions are necessary?
Is it even possible?

What are the differences between SV5.1 and SV5.1 RefA?
Does anyone have SV5.1 and can make it available as upload?

I'm thankful for every hint and each tip.

Thank you in advance for your answers.

Sincerely,

nola2k


P.S.: Any news concerning ABB cpmPlus Smart Client?

nola2k wrote:is it possible to install 800xA on a 64 bit operating system?
What parts are easy to install and which not?
Does anyone have experience with 800 xA and Windows 64 bit?
What conditions are necessary?
Is it even possible?

x64 Windows not yet supported. You can (manually!) install Aspect server, Batch server, IM or PM node on 64-bit windows but it is only for testing.

nola2k wrote:What are the differences between SV5.1 and SV5.1 RefA?
Does anyone have SV5.1 and can make it available as upload?

Main difference:
With Rev.A 800xA SV5.1 supports MS Office 2010 and Windows 7 SP1 (32-bit). Fixed some bugs, added new (not so useful) aspects, etc...
Read here: System 800xA 5.1 Rev A Release Notes New Functions and Known Problems.pdf

nola2k wrote:Does anyone have SV5.1 and can make it available as upload?

800xA SV5.1 available here: viewtopic.php?f=43&t=15855 . As far as I remember you had download it already, why do you need it once again?

Hello Linkinx64,
Thank you for your quick response.
I have devoted myself, I thought SV 5.1 Ref.A.
Does anyone have this version and upload them?
Yours sincerely
nola2k

HI, nola2k

I have 800xA Rev.A but there's one issue that is not described in System 800xA 5.1 Rev A Release Notes New Functions and Known Problems.pdf but fully described here: viewtopic.php?f=3&t=15681#p47983
That's why I'm temporary holding upload of this rollup on public.
If you meet any problem described in the manual above - I can upload Rev.A rollup.
But it will take a while because at the moment I'm overloaded at work and rollup size is 5.7 Gb.
If some one else will upload earlier than me - I will appreciate.

Hi, Linkinx64
Thank you for your quick response.
There is no problem if it lasts longer.
Take your time, you need.
Many greetings, nola2k

Rev.A update package for 800xA SV5.1 successfully uploaded to http://www.wupload.com/folder/638512 folder.

In total there are 18 files, 5.24Gb (17 x 300Mb + 267Mb).

In there are any problem with donwload please inform.

Hi, Linkinx64

Thank you for the upload, that was much faster than I expected.
Thanks again for your excellent work and best regards

nola2k

Hi, nola2k

After you complete download 800xA Rev.A update package I will upload one more thing, that might will be interesting for you...

regards, Linkinx64

Hi, Linkinx64
I'm done with the download, as always without problems.
many greetings, nola2k

Hi, nola2k

Well, as I promised, one more thing uploaded.
See last post in this topic: viewtopic.php?f=3&t=15775

Hi, Linkinx64

This is really a great surprise, many many thanks.

kindly regards, nola2k

Hello Linkinx64,

Could you please upload ABB 800xA 5.1 to a different file Server because it is hard for me to download. Download cuts off half-way for each part and buying premium account access is difficult in my location. If you have time kindly upload to Megaupload or fileserve.

Thak you so much for all your support!

Best Wishes,

Abelky98

Hi, Abelky98

ABB 800xA 5.1 mirrored on rapidshare here: viewtopic.php?f=43&t=15855
If you mean ABB 800xA 5.1 Rev.A - I can upload to another file hosting but it will takes a while too.

Hello Linkinx64,

Yes, I mean version 5.1 Rev A. Just do it when you have time.



Abelky98

Hi, Abelky98

I am mirroring 800xA Rev.A to http://fileserve.com/list/9MDkEQC. But for package > 5Gb it can't be "just".. It will takes a day or two.
Try to download part that not yet mirrored from Wupload.

Hi Linkinx64,

Thank you so much!

Best Wishes,

Abelky98

Upload to fileserve successfully finished. +mirror on filefactory

So, now 3 download sources available for Rev.A update package for 800xA SV5.1 :

• http://www.wupload.com/folder/638512

• http://www.filefactory.com/f/7e6e699478656ad4

• http://fileserve.com/list/9MDkEQC

Hi,
Now ABB released a separate media for 800xA which will support Windows 64 bit.
If anybody have this can please upload it.

Thanks in advance.

Sagayaraj2 wrote: Now ABB released a separate media for 800xA which will support Windows 64 bit.
If anybody have this can please upload it.

Here is the 800xA (with integrated rev.A update) for Windows x64: viewtopic.php?f=43&t=15855#p53572
If you mean 800xA rev.B - now it is available from ABB Solutionsbank. No need to upload even.

Does any one has ABB 800xA V6.My company getting a system from supplier but they are giving the soft or training. I am just curious to try. Tnx in Advance.

can you send to me links ,i want to setup VMware Workstation Pro dcs
Thanks you very much !