Page 1 of 5
[?+]: unPassword Library in ABB Compact Control Builder
Posted: Mon Dec 27, 2010 7:01 am
by smb
How can I open password protected library in ABB compact control builder AC800M?I don't have password of library.
Re: Library protection in ABB Compact Control Builder
Posted: Mon Dec 27, 2010 8:15 am
by Linkinx64
Hi smb
I can find password for CB password-protected library.
Please upload library or tell library name + version (in case you want to know password from standard library).
Please pay attention to some cyrillic symbols in password wrote:password example: Tcaцrmqo62
Please pay attention to
some cyrillic symbols in password - you can get cyrillic symbols from Windows character map:
Re: [?]: unPassword Library in ABB Compact Control Builder
Posted: Mon Dec 27, 2010 9:21 am
by Linkinx64
There are no library file. The CCB library file should have
.lbr extension.
Plz, upload
L_BLib-1-0-0.lbrThis file normally located in the same folder where you got L_BLib-1-0-0.
By the way: tell me the CCB version you use to open this library.
I didn't find any file with *.lbr extenstion.The software which I use is "Compact Control Builder AC 800M version 5.0.0/0".
It should looks like this:
The file icon may be different (I use CCB v5.1.0-0).
File name should be:
BLib-1-0-0.lbr
This library has dependency from BoilerLib:
The password from BoilerLib-1-0-0:
indgidej
When I enter the password.it seems it's correct.But I couldn't open the library and I got the following page.
Link_is_Dead :(/page.rar
What's my problem?
I can't see any functional block in BoilerLib
Plz upload folder L_BoilerLib-1-0-0 also
Or maybe whole Library folder (C:\ABB Industrial IT Data\Engineer IT Data\Compact Control Builder AC 800M\Projects\Libraries).
There are many standard libraries: BasicLib, IconLib, ControlStdLib etc.
Actually, right name for that - system libraries.
Which of those system libraries password you want to know?
ControlSimpleLib 1.0-10 password:
b45927gFB
Re: [?]: unPassword Library in ABB Compact Control Builder
Posted: Sat Jan 22, 2011 2:11 pm
by Linkinx64
I open "PiecewiseLinearReal" in "ControlSimpleLib 1.0-10" with your password.I find two another function "PiecewiseLinearCalc" and PiecewiseLinearInverse" in it. How can see inside of these functions?
These functions are defined in ControlSupportLib. You have to unprotect ControlSupportLib 1.1-6 using password:
Tcaцrmqo62
Please pay attention to
4th symbol (cyrillic charmap) in password - you can get it from Windows character map:
After unprotect ControlSupportLib you'll be able to see PiecewiseLinearCalc and PiecewiseLinearInverse by rightclick, Go to PiecewiseLinearReal->In Editor.
It seems the password is not correct.In addition I don't see these two functions under ControlSupportLib 1.1-6.
You can't see these functions because they are hidden - it become visible after enter the password. Password is correct.
I right click on ControlSupportLib and select Properties->Protection and I got the following picture.
When I enter the password.
I got "Invalid password" message.
[url=hhttp://img825.spamm.us/img825/9793/pswccp.gif]
[/url]
Ok, I know what's goin' on:
Make the follow change in Windows regional settings:
Add RUSSIAN language support
Insert Windows XP installation disc (if required), restart PC and try again.
It works.
Thank you.
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Mon Jan 24, 2011 11:09 am
by Linkinx64
How can I remove password from standard library?
System libraries password cannot be removed because these libraries have both attributes - "secured" and "released".
These attributes can't be conjunctively applied for user library.
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Tue Jan 25, 2011 7:45 am
by Linkinx64
What's the password of "BasicLib 1.4-9"?
That was quite difficult
Password is : HUUL
ДЦЕW
where
ДЦЕ are from cyrillic. As we discussed - type it using character map.
or
HUULÄÖÅW
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Fri Mar 25, 2011 12:11 pm
by Linkinx64
brave_eagle wrote:Basic Lib 1.5-7 PLS
Password is:
weiKgytfcn7
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Tue Apr 12, 2011 5:19 am
by Linkinx64
Could you tell us which software you used to open this file? This file doesn't seems a Compact Control Builder library...
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Tue Apr 12, 2011 9:00 am
by brave_eagle
Maybe is AC31GRAF or 907AC1131
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Wed Apr 13, 2011 7:58 am
by Linkinx64
Finally I've downloaded it (AC1131)..
viewtopic.php?f=3&t=8905&p=21001 Much more time spent for download rather than for the RE-search.
tschanski wrote:i tried to open with 907ac1131 and codesys 2.3 and was prompted with a password-popup...
When opening abb-bib4.lib type in password-popup:
sst_ts_kb2 and click OK.
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Sat Jul 02, 2011 3:36 am
by Linkinx64
puppy75 wrote:Hello,
if possible, I need password for following libraries:
- ControlBasicLib 1.1-4
- ControlSimpleLib 1.1-2
- ControlStandardLib 1.3-8
Theese are part of RevD 800xA AC800M Connect installations.
Thanks in advance.
Code: Select all
ControlBasicLib 1.1-4: 35UjhGsVkp
ControlSimpleLib 1.1-2: 2gyHDreQA
ControlStandardLib 1.3-8: fpRcYniAfr
ControlSupportLib 1.2-2: yPUg56FE
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Fri Jul 08, 2011 5:56 am
by Linkinx64
st_e_fan wrote:Yes it's ControlBasicLib 1.6-9. I will try to bring it with me and send it..i'm just not sure will be only export from the Lib structure enough
Best Regards!
Would it be possible also for ControlBasicLib 1.6-9 and ControlStandardLib 1.4-6
Are you sure "ControlBasicLib" has 1.6-9 version?
ControlStandardLib 1.4-6: hjHghgdfddbg
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Mon Jul 11, 2011 10:27 am
by Linkinx64
systane wrote:I have CCB 5.1
And i´m pretty sure he is referring to basiclib not to control basiclib
I adjoined to his request. I need pass for:
AlarmEventLib 1.5-8
BasicLib 1.6-9
ControlBasicLib1.2-3
Control SimpleLib 1.2-3
ControlSUpportLib 1.3-4
Thanks in advance
Code: Select all
AlarmEventLib 1.5-8 J589544gfcBfB
BasicLib 1.6-9: Hasiw834ghYiU
ControlBasicLib 1.2-3: IopVmLkt54drB
ControlSimpleLib 1.2-3: bvfr56788iJM
ControlSupportLib 1.3-4: ttkllues545gB
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Mon Jul 11, 2011 4:44 pm
by Linkinx64
lolo_xyz wrote:It would be possible to unPassword the
SystemLib
MMSCommLib 1.3-4
ModBusCommLib 1.3-3
ModBusTCPCommLib 1.2-4
Any detailed procedure to unPassword with the Olydbg would be appreciated
Thanks in advance
Code: Select all
System : kdY73kjdkl
MMSCommLib 1.3-4 : rGHVBG67535
ModBusCommLib 1.3-3 : Dsavxcmhjyrt
ModBusTCPCommLib 1.2-4 : 9nhfDFdfjkghRj
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Fri Aug 26, 2011 9:19 am
by Linkinx64
elcole wrote:It would be possible to unPassword the
Basiclib 1.3-3
ControllStandardlib 1.2-4
thanks
System version 4.1.0-6 ?
Code: Select all
Basiclib 1.3-3: g620gG
ControlStandardLib 1.2-4: KOURcdG
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Thu Sep 01, 2011 3:45 am
by Linkinx64
Code: Select all
MacroLib: MacroABBEAAC800M7067
MacroLibDefaults not protected
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Fri Nov 11, 2011 11:20 am
by puppy75
Hello again,
Is possible to obtain password relatedto three libraries included in following zip?
http://dl.dropbox.com/u/15190010/PCdeviceLibs.zip
Thank in advance
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Wed Nov 16, 2011 8:08 am
by Linkinx64
Propane wrote:I just installed the new Compact Control Builder version 5.1.0/1.
The previously posted passwords for BasicLib no longer work.
I would like to know the new password for BasicLib 1.6-10.
I don't have Compact Control Builder version 5.1.0\
1.
Very strange... It usually not happen between the revisions, only between versions... Probably protection was changed...
Could you share the software to let me check?
Propane wrote:It's been 2.5 months since you got Compact Control Builder version 5.1.0/1.
Were you able to reveal the password for BasicLib 1.6-10?
See answer in PM
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Thu Nov 24, 2011 9:33 pm
by puppy75
I remember in this thread a reply about this request....but seems deleted...?
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Fri Nov 25, 2011 7:02 am
by Linkinx64
puppy75 wrote:I remember in this thread a reply about this request....but seems deleted...?
More exactly: here was a reply and the request about BMI libraries to upload.... All gone
Actually, is it make any sence for you if you already got the password for
?
P.S. Can anyone contribute BMI (Minerals Library) for 800xA 5.1?
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Sat Nov 26, 2011 7:22 am
by mandichi
Hi Linkinx64,
Could you please help me unpassword below file
http://www.megaupload.com/?d=SA0GXDES
Thank you and Best regards.
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Sat Nov 26, 2011 10:25 am
by Linkinx64
Code: Select all
CraneAdvancedLib: Akterspegel
CraneBasicLib: Helljuset
CraneLpsLib: Kronprinsessa
CraneMathLib: windmill
CranePE1373: SkitKey01
CraneStandardLib: Avgaserna
CraneTpsLib: svenskadagbladet
How's about to upload folders L_CraneBasicLib-1-0-0, L_CraneStandardLib-1-0-0 etc. for the files above?
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Thu Dec 01, 2011 4:48 am
by Linkinx64
Code: Select all
ControlAdvancedLib 1.3-4 q3321mGDe
ControlExtendedLib 1.2-3 IjuyGDE69
ControlObjectLib 1.1-5 nfRDKi78wn
ControlSolutionLib 1.1-4 FGdcGOW
MMSCommLib 1.2-13 hwoHF56VTg
ModBusTCPCommLib 1.1-2 MjiJSAQ54y
ModBusCommLib 1.2-2 JHfg65DSWbH
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Tue Dec 06, 2011 2:27 pm
by Linkinx64
Here your passwords:
Code: Select all
MineHoistAppLib: cie5W9jice
MineHoistBasicLib: uVCa3TvYNp
MineHoistBrake: hn8u87wfKF
MineHoistPosLib: DanielDummy
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Wed Dec 07, 2011 5:02 pm
by Linkinx64
This will work:
Code: Select all
AHLib olofbriljerar
AHLib0 orvar626
AHLib1 arne726
AHLib2 bertil036
AHLib3 curt536
AHLib4 daniel246
AHLib5 erik156
AHLib6 fredrik266
AHLib7 gustav576
AHLib8 henrik096
Who all these people?
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Fri Dec 23, 2011 9:45 pm
by hina
Dear Linkinx64,
Do you have a SupervisionLib 2.4-4?, because i have the project with AC800 Compact Control Builder Professional version 5.0.2/2
after i check on the library there is no SupervisionLib 2.4-4 on Compact Control Builder Professional
Please advice
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Sat Dec 24, 2011 5:10 am
by Linkinx64
Dear hina
The SupervisionLib (as well as some other system libraries) is not presented in compact version of Control Builder, only in Control Builder M (that's a part of 800xA System).
You need install 800xA SV5 SP2 or later version, then restore project made in CCB 5.0.2/2 (actually, made in 800xA's CBM and exported to compact version).
To restore compact project in Control Buider M use Tools >> Maintenance >> Compact CB >> Open From Compact CB Format.
Regards
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Wed Feb 01, 2012 4:15 am
by Linkinx64
elcole wrote:It would be possible to unPassword the controlsimplelib 1.0-4
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Mon Jun 04, 2012 8:47 pm
by Linkinx64
SOULHACK wrote:the CommunicationLib 1.0-0
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Tue Jun 12, 2012 10:06 am
by puppy75
Linkin', sorry for delaying in my replay, but unfortunately I lost your posted password
Can you send me again the password of that libraries?
I link you the new place for the lib:
https://dl.dropbox.com/u/15190010/PCDeviceLib.zip
Thank a lot!
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Tue Jun 12, 2012 3:37 pm
by Linkinx64
puppy75 wrote: sorry for delaying in my replay, but unfortunately I lost your posted password
Go look for where you lost it
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Mon Jul 23, 2012 5:50 am
by Linkinx64
ionold3 wrote:Could you post the pass for
SignalLib 1.6-9 library
You don't need this really.
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Fri Aug 24, 2012 8:07 am
by Linkinx64
azhw wrote:amit_sabby wrote:Can you help me get the password of the lib:rcrTechnoGenLib-5-0-2.lbrrcrTechnoSystemLib-5-0-1.lbrrdDriveGenLib-1-0-0.lbrrdDriveSystemLib-1-6-0.lbrrfmDriveGenLib-5-0-2.lbrrfmDriveSystemLib-5-0-0.lbrrfmMdrLib-5-0-0.lbrrfmSystemLib-5-0-1.lbr
Linkinx64 wrote:Wait until I find my crystal ball...
crystal ball ? what is it?
sounds very interesting!
Esoteric method of password revealing using crystal ball:
I think classic reveal password methods are still actual and easier than the supernatural. Isn't it?
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Fri Aug 24, 2012 1:50 pm
by amit_sabby
sorry for misunderstanding...here is the link for library for which i need password thank you.
http://dl.dropbox.com/u/36769999/rfmSystemLib-5-0-1.rar
thanks azhw
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Fri Aug 24, 2012 3:06 pm
by Linkinx64
Code: Select all
rfmSystemLib 5.0-1: rfmSystemLib1872
rfmDriveSystemLib 1.6-0: rfmDriveSystemLib312
rfmDriveGenLib 1.0-0 not protected
rfmMdrLib 5.0-0 not protected
rdDriveSystemLib 1.6-0: rdDriveSystemLib3127
rdDriveGenLib 1.0-0 not protected
rcrTechnoSystemLib 5.0-1: rcrTechnoSystemLib74
rcrTechnoGenLib 5.0-2 not protected
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Fri Aug 24, 2012 3:58 pm
by amit_sabby
thank you very much, you solved my four year old head nagging...it works wonder
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Sat Aug 25, 2012 8:57 am
by azhw
very great!
Linkinx64 is really a genius, and a helpful and respectable man!
I wonder what method Linkin64 used to find the password so fast and exact?
you have a keygener? use ollydbg ? or using some bug of CCB itself?
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Sat Aug 25, 2012 1:07 pm
by Linkinx64
I use Ollydbg + special conversion and decryption software (developed by myself).
There's nothing genious in unpassword libraries. I think everyone who have target, patience and basic knowledge of asm and c++ can do the same...
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Thu Aug 30, 2012 3:38 am
by Linkinx64
lolo_xyz wrote:I need the password of SerialCommLib 2.1-2
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Fri Aug 31, 2012 8:12 pm
by st_e_fan
This post with the crystal ball makes my day!!!
Thanks for the good humor!!
Now i"m pointing to my subject - i need the password for the Fort Knox Bullion Depository. Please help!
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Sat Sep 01, 2012 9:00 am
by Linkinx64
st_e_fan wrote:i need the password for the Fort Knox Bullion Depository. Please help!
I will start to process your request as soon as the Ecuadorean embassy established in my town
Picture: Julian Assange gave a defiant statement from a balcony at the Ecuadorean embassy in London.
Source: http://www.telegraph.co.uk
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Tue Sep 18, 2012 1:02 pm
by amit_sabby
http://dl.dropbox.com/u/36769999/WINDER-1-0-0.rar
i would like to have your service again.
please i need password for few libraries in link given.
thanks for your last posting. it is really helpful.
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Tue Nov 20, 2012 4:05 pm
by puppy75
Linkinx64 wrote:You don't need this really.
Hi Linkinx64, can you post the pass anyway for this lib? We need it....
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Thu Nov 22, 2012 12:02 pm
by iatsiman
Hello Linkinx64!
Could you please give the password for SupervisionBasicLib 1.1-7 ?
Thanks in advance.
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Thu Nov 22, 2012 3:00 pm
by Linkinx64
This system library is protected using the latest encryption algorithm. See PM.
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Wed Nov 28, 2012 11:13 pm
by drgry
Hello Linkinx64
Would it be possible to unlock these libraries:
http://depositfiles.com/files/7yfoitq2y
Thanks in advance
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Thu Nov 29, 2012 11:15 am
by Linkinx64
ControlSimpleLib:
ControlSupportLib:
rdDriveSystemLib:
rdSystemLib:
rdTechnoSystemLib:
rmcSystemLib:
Do you have rd libraries for the 800xA 5.x (with a graphic aspects)?
Anybody can upload it?
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Thu Dec 13, 2012 9:00 pm
by power2l
Hello Linkinx64!
Would you be willing to provide the passwords for the following library files?
CraneStandardLib-1-0-0.lbr
CranePE1373Lib-1-0-0.lbr
CraneCableReelLib-1-0-0.lbr
CraneBasicLib-1-0-0.lbr
CraneAdvancedLib-1-0-0.lbr
https://dl.dropbox.com/u/81530526/CraneLib.zip
Thank you!
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Fri Dec 14, 2012 5:30 am
by Linkinx64
power2l wrote:Would you be willing to provide the passwords for the following library files?
CraneStandardLib-1-0-0.lbr
CranePE1373Lib-1-0-0.lbr
CraneCableReelLib-1-0-0.lbr
CraneBasicLib-1-0-0.lbr
CraneAdvancedLib-1-0-0.lbr
https://dl.dropbox.com/u/81530526/CraneLib.zip
Can you please upload folder for the CranePE1373Lib? It must be in the same directory and has name
L_CranePE1373Lib-1-0-0.
Re: [?+]: unPassword Library in ABB Compact Control Builder
Posted: Fri Dec 14, 2012 2:01 pm
by power2l
Thank you Linkinx64, here is a link to the folder you requested.
https://dl.dropbox.com/u/81530526/L_Cra ... -1-0-0.zip
