Page 1 of 3

[?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Wed Sep 15, 2010 9:17 pm
by CoMod
? wrote:Hi anybody here know where can i find an activation for the GE Fanuc proficy machine edition ??..
instructions:

0. Download keygen for QuickDesigner/Profici ME and generate auth. key for your site code: viewtopic.php?f=14&t=7176
Keymaker: http://depositfiles.com/files/5kstsqe1y
or
http://rapidshare.com/files/441078777/Q ... thTool.zip
1. Run the Product Authorization of kit Proficy ME and copy Site Code.
2. Run the crack (preferably through START.CMD), enter the Site Code, press the "Generate Serial and Key Code".
3. Back to the Product Authorization, click Key Code and enter the data from the Keygen.
Инструкция:
0. Скачать кейген из viewtopic.php?f=14&t=7176
1. Запустить Product Authorization из комплекта Proficy ME и записать Site Code.
2. Запустить кейген (желательно через START.CMD), ввести Site Code, нажать "Generate Serial and Key Code".
3. Вернуться в Product Authorization, нажать кнопку Key Code и ввести данные из кейгена.
Image



or
Send private message to Anwer Shahzad your site code ****-****
and wait .... (pm)
Use Private Message

We clean theme, and delete old requests
hi oscarl
you sand me site code is = ????-????
I Give you Authorization for the Proficy ME = 5.9 & 6.0
from
Anwer Shahzad

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Mon Dec 13, 2010 5:58 pm
by anwer shahzad
hi vladsam
I Give you Authorization for the Proficy ME = 6.5 - for site code is = DB2E-317C
http://rapidshare.com/files/436711620/AUTHORIZ.DAT
Authorization copy in flppy and add authorization in the software OR
(1, you copy Authorization.data = in drive C:\) (2, you run the software open help) (3, product Authorization)
(4, Authoriz software) (5, Add) (6,flopply disk trancfer) ( 7, next) (8, Browse = C:\AUTHORIZ.DAT) (9, Open )
(10, Next) (11, Finish)= your software Authoriz is ok
If you change current GE Site Code to any Site Code
(1, Install the new Software in defraent PC and find site code is = ????-????)
(2, you run the software your install and Authorizd ok PC ) (3, open help) (4, product Authorization)(5,Transfer Liecense) (6,Move) (7,Ok) (8, Enter Target Site Code = ????-????) (9, Next) (10,Please re-Verify Site Code = ????-????) (11,Ok)
(12, Please Insert a blank floppy) (13, Next) (14, Finish) (15, Ok) ( your current GE Site Code Move to any Site Code )
your software Authoriz Move is ok
from (welc) (welc) (welc) (welc)
Anwer Shahzad

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Thu Mar 31, 2011 6:41 pm
by anwer shahzad
hi ALL
I have another problem.
I need to unlock the View Lock password on some ladder block on GE-Fanuc 9030.
Any help would be greatly appreciated Many thanks in advance

from (tyou) (tyou) (tyou)
Anwer Shahzad & maverik53

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Fri Apr 01, 2011 7:15 am
by anwer shahzad
hi ALL
I turn on and turn off laptop and site code is changed = machine edition 6.5 , I have a question regarding he computer, the day yesterday prompted a license for a site code,today at turn on my computer, my site code changed again, every time I turn on and turn off my laptop my site code is changed , I have installed the software pro simatic S7 2006, rs-logix 5000 (10,11,12,13,15,16,17,18,19), machine edition 6.5, rs view machine edition, win cc v 7.5, all licenses are lost and I have to reinstall, not that it can be and let me know your point of view.

thanks in advance and greetings
from (tyou) (tyou) (tyou)
jarielg

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Wed Jun 22, 2011 1:49 pm
by anwer shahzad
hi zahidj
I Give you Authorization for the Proficy ME = 6.0 for site code is = 4064-07CF
https://rapidshare.com/files/2513319124/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Wed Jun 22, 2011 1:53 pm
by anwer shahzad
hi icipasa
I Give you Authorization for the Proficy ME = 5.6 for site code is = E74D-C361
https://rapidshare.com/files/1202121452/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Tue Jun 28, 2011 9:50 am
by relay
hi all. Is it possible to change site-code?

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Tue Jun 28, 2011 5:58 pm
by anwer shahzad
hi Martijn
I Give you Authorization for the Proficy ME = for site code is = FF9D-792F
https://rapidshare.com/files/1868599518/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Tue Jun 28, 2011 6:04 pm
by anwer shahzad
hi emapcs
I Give you Authorization for the Proficy ME = 6.5 for site code is = EEB5-B09B
https://rapidshare.com/files/3320067924/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Tue Jun 28, 2011 6:12 pm
by anwer shahzad
hi kaii98
I Give you Authorization for the Proficy ME = 5.9 for site code is = 4D8F-1E9A
https://rapidshare.com/files/3706559882/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Tue Jun 28, 2011 6:18 pm
by anwer shahzad
hi xor12
I Give you Authorization for the Proficy ME = 5.8for site code is = 3287-59F1
https://rapidshare.com/files/479410375/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Tue Jun 28, 2011 6:24 pm
by anwer shahzad
hi brenny
I Give you Authorization for the Proficy ME = 5.9 for site code is = C9BE-87CE
https://rapidshare.com/files/540686362/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Tue Jun 28, 2011 6:29 pm
by anwer shahzad
hi mneryz
I Give you Authorization for the Proficy ME for site code is = A8D6-7115
https://rapidshare.com/files/1476637297/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Tue Jun 28, 2011 6:42 pm
by anwer shahzad
hi luke45
I Give you Authorization for the Proficy ME =for site code is = 9DE7-2C29
https://rapidshare.com/files/3921622686/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Tue Jun 28, 2011 6:52 pm
by anwer shahzad
hi jurassic
I Give you Authorization for the Proficy ME = 5.6 for site code is = 86A1-A782
https://rapidshare.com/files/602232281/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Tue Jun 28, 2011 6:59 pm
by anwer shahzad
hi Oscar
I Give you Authorization for the Proficy ME = 5.9 for site code is = 4080-7D3C
https://rapidshare.com/files/998749087/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Tue Jun 28, 2011 7:06 pm
by anwer shahzad
hi ret_y
I Give you Authorization for the Proficy ME = 6.0 for site code is = 6944-5CCA
https://rapidshare.com/files/1623845550/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Tue Jun 28, 2011 7:11 pm
by anwer shahzad
hi mikeybelt
I Give you Authorization for the Proficy ME = 6.5 for site code is = 11A3-3548
https://rapidshare.com/files/161652818/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Tue Jun 28, 2011 7:17 pm
by anwer shahzad
hi relay
I Give you Authorization for the Proficy ME = 6.0 for site code is = C35E-B78B
https://rapidshare.com/files/780886394/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Tue Jun 28, 2011 7:23 pm
by anwer shahzad
hi Martijn
I Give you Authorization for the Proficy ME = for site code is = FF9D-792F
https://rapidshare.com/files/3571710679/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Thu Jul 07, 2011 6:25 pm
by treefort
Hi Anwer. (oo)

Can I please have an authorization file for Proficy ME 6.5? Site code: 3004-A355

Thanks! Greatly appreciated.

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Sat Jul 09, 2011 8:00 am
by mamannan73n
Dear Anwer Bhai
Can I have the Activation file for the proficy ME 5.6
My site Code is A80D-CFFA
Hope to get your help soon.
Waiting for your kind response.
Thanks
Mannan

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Mon Jul 11, 2011 11:53 pm
by mathijn75
The codes can be found at
http://www.megafileupload.com/en/file/3 ... E-zip.html

Thanks anwer shahzad! Hopefully you don't mind that I help with your provided code?

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Tue Jul 12, 2011 9:46 am
by mamannan73n
The link is wrong. Pls recheck for me.

Dear Anwer,
Can you help me for the problem?
Thanks a lot in advance for your response as soon as posible.

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Tue Jul 12, 2011 10:08 am
by Linkinx64
Stop this :anon: ism with wintay.dat copying and file transfer.

Download keygen for QuickDesigner/Profici ME and generate auth. key for your site code: viewtopic.php?f=14&t=7176
Image

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Tue Jul 12, 2011 4:04 pm
by anwer shahzad
hi treefort
I Give you Authorization for the Proficy ME 6.5 = for site code is = 3004-A355
https://rapidshare.com/files/893532974/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Tue Jul 12, 2011 4:23 pm
by anwer shahzad
Dear mannan Bhai or mamannan73n
I Give you Authorization for the Proficy ME 5.6 = for site code is = A80D-CFFA
https://rapidshare.com/files/1905338738/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Tue Jul 12, 2011 4:32 pm
by anwer shahzad
hi Vagabundo
I Give you Authorization for the Proficy ME = 6.5 for site code is = 1972-D429
https://rapidshare.com/files/4134871689/AUTHORIZ.DAT
for Virtual PC is = FF75-888B
https://rapidshare.com/files/2586648744/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Tue Jul 12, 2011 4:38 pm
by anwer shahzad
hi jurassic
I Give you Authorization for the Proficy ME = 5.6 for site code is = A02C-649F
https://rapidshare.com/files/3139568933/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Tue Jul 12, 2011 4:44 pm
by anwer shahzad
hi soundview00
I Give you Authorization for the Proficy ME for site code is = F05B-21A9
https://rapidshare.com/files/265614188/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Tue Jul 12, 2011 4:49 pm
by anwer shahzad
hi ajmito
I Give you Authorization for the Proficy ME = 5.0 for site code is = B194-0B35
https://rapidshare.com/files/2599454270/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Tue Jul 12, 2011 4:54 pm
by anwer shahzad
hi desuhardy
I Give you Authorization for the Proficy ME = 5.9for site code is = 3A7D-40A2
https://rapidshare.com/files/2412832786/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Tue Jul 12, 2011 4:59 pm
by anwer shahzad
hi Civan or Ivan Castellaro
I Give you Authorization for the Proficy ME = 6.5 for site code is = 8159-2CDE
https://rapidshare.com/files/2357189648/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Tue Jul 12, 2011 5:08 pm
by anwer shahzad
hi ajmito
I Give you Authorization for the Proficy ME = 6.5 for site code is = D0F7-9823
https://rapidshare.com/files/999706598/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Wed Jul 13, 2011 11:34 am
by mamannan73n
Thaks a lot to dear Anwer Bhai.
I completed the Authorization very well.
Thanks again.
Mannan
Bangladesh

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Thu Jul 14, 2011 2:59 pm
by anwer shahzad
hi sidik
I Give you Authorization for the Proficy ME = 6.5 for site code is = 0FCC-CF6C
https://rapidshare.com/files/786351964/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Thu Jul 14, 2011 3:04 pm
by anwer shahzad
hi fulcrum
I Give you Authorization for the Proficy ME = 6.5 for site code is = 103B-4FD2
https://rapidshare.com/files/4027045585/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Fri Aug 12, 2011 5:49 pm
by haas
Please can you send me activation code for Ge Fanuc Machine Edition 6.0. My site code is 519B-1DE1
Do not upload file to RapidShare. I do not have an account.
Thanks
Haas

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Thu Oct 27, 2011 12:27 am
by Dave2008
Hello All!
I need the key code for Motion Developer, my Proficy Machine Edition is 6.0.
I try with all autoriz.dat files in this post without luck.
my site code is: 4F41-A7A1.
thanks for your support!

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Sun Oct 30, 2011 3:29 am
by Peehel
Hi Anwer Shahzad,
My site code is 2E1D-CA02

Please send me authorization for Proficy ME 6.5

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Mon Feb 13, 2012 11:46 am
by winners
my site code is 1A51-A8D7
FOR PME 6.0
please help me

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Thu May 24, 2012 9:34 pm
by ahlnus
hi anwer shahzad

i need authorization code for cimplicity pme 5.9
my site code is BBA6-5C58
help me please.

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Thu Jun 14, 2012 4:13 am
by kylevesque
I also require authorization for Proficy 5.9ME
Site Code: 9F2A-247B
Thanks

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Sat Nov 24, 2012 4:27 pm
by ostogradski
I'm looking for "Proficy Machine Edition 7.5" and "Proficy Machine Edition 7.50 SIM 1" download links.

Please Help

(sos)

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Fri Dec 14, 2012 5:38 pm
by azhw
I need proficy machine edition v7.5, too!

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Thu Apr 04, 2013 6:14 am
by eneru
Hi Anwer.

Can I please have an authorization file for Ge Fanuc Proficy 5.00 - Cimplicity Machine Edition Site code: 5A4C-7A16 (oo)

Thanks! Greatly appreciated.

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Thu Jan 23, 2014 12:31 pm
by raph_rf
Hello , is that someone could help me to find proficy ME for download?
thank you

[Search button]

Posted: Fri Jan 24, 2014 4:42 am
by vlad2006gr
See link Schtiel :
viewtopic.php?f=3&t=20042&view=previous
Good luck!

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Fri Jan 24, 2014 11:30 am
by ANAND1972
Hi Anwer!
i need authorization code for Proficy Machine edition v5.60 Build 4083
my site code is 4AE0-F217.

Please help to provide with the keymaker/ keygen link for future use.
Many thanks!

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Posted: Sat Dec 06, 2014 1:59 pm
by kunal_1984
Hi
anybody help me for code
I want Authorization for the Proficy ME = 7 for site code is = 1E0C-D72E