Request: YOKOGAWA CENTUM CS3000

другие контроллеры
Post Reply
fen
Posts: 3
Joined: Fri Sep 07, 2007 9:16 am
Location: Africa

Request: YOKOGAWA CENTUM CS3000

Post by fen » Fri Sep 07, 2007 9:36 am

yokogaw cs3000
Last edited by fen on Tue Jan 06, 2009 9:55 am, edited 2 times in total.

fen
Posts: 3
Joined: Fri Sep 07, 2007 9:16 am
Location: Africa

cs3000 software revision 2 (R2)

Post by fen » Sun Sep 09, 2007 4:15 pm

Last edited by fen on Tue Jan 06, 2009 9:53 am, edited 1 time in total.

utuh_garubuk
Posts: 37
Joined: Sun Dec 04, 2005 10:06 am
Location: Indonesia

Post by utuh_garubuk » Mon Sep 10, 2007 4:02 am

Tested and working.. Nice... :D
You can create and simulate only one (1) FCS and and more than one HIS in a single PC..
what You need..:
1. CS3000 Software Medium R3.x.xx (I think old version it's not function)
2. Cd Key in Flopy disk

How to install :
1. Insert Softwrae Medium cdrom.
2. Insert Cd key to drive A or flopy driver
3. Run setup at Software medium cdrom.
4. Follow the instruction, If ask ID.. just open cd key file"Revision.KCD" with notepad and you can find where the ID.. :D
5. At installation proccess, program will ask for "next Cd key" or "next Software medium". just select "No" option.
6. After finish do not select operator keyboard and com port just skip it.
7. Installation finish, and restart.

How to use Simulation:
1.After PC restrat, you can see small icon intray ( you will find it)
2.Select "Start--> Program-->Yokogawa Centum-->System View"
3.Program opened and dialog box appear that you do not have Project .
4.Select yes to create project and follow the instruction..( read manual for creation project, FCS and HIS)
5. After project has created, you can beginning run simulation..

k66473
Posts: 25
Joined: Tue Jun 05, 2007 6:17 am
Location: South East Asia
Contact:

Post by k66473 » Tue Sep 11, 2007 2:59 pm

R2 can not install in windows xp.
R3 is the newest version of centum.
do you have r3 version?

khongai
Posts: 41
Joined: Mon Jun 04, 2007 5:57 am
Location: Vietnam

Post by khongai » Sat Sep 15, 2007 3:38 am

Please help,

since during the installation, the software request keycode FD should be inside the drive. How to solve this matter?

Should have this keycode FD?

Thanks in advance.

k66473
Posts: 25
Joined: Tue Jun 05, 2007 6:17 am
Location: South East Asia
Contact:

Post by k66473 » Sat Sep 15, 2007 11:47 am

yes, you must have it.
Find it please.
It is somewhere in the site.

rov1976
Posts: 1
Joined: Mon Mar 03, 2008 3:08 pm
Location: Saudi Arabia

Post by rov1976 » Tue Mar 04, 2008 7:09 pm

sir can this simulate fieldbus devices even w/o the actual ALF111 card? best rgrds, rov1976

af.naderi
Posts: 124
Joined: Sun Mar 15, 2009 8:06 am
Location: Europe

Re: [LINK]: YOKOGAWA CENTUM CS3000

Post by af.naderi » Thu Jun 30, 2011 8:35 pm

hi fen
thanks for your links. i 'm new in Yokogawa Softwares and want to download them, but your links:
Link_is_Dead :(/CE ... RE.iso.001
...
doesn't work. Next, these links are about 170MB totally, but second links are about 110MB. What 's the difference?
can you reuload first links?

Thanks

CatCesar
Posts: 82
Joined: Tue Oct 24, 2006 12:01 pm
Location: Ukraine

Re: [LINK]: YOKOGAWA CENTUM CS3000

Post by CatCesar » Tue Sep 27, 2011 1:11 pm

Please reupload rapidshare's links

bat_on
Posts: 12
Joined: Sat Mar 05, 2011 10:35 am
Location: Russia

Re: [LINK]: YOKOGAWA CENTUM CS3000

Post by bat_on » Wed Sep 28, 2011 3:20 am

On work the version is established CENTUM CS 3000 R3.02.30. Total size in archive 117 Мb

After training on courses I have last version: CENTUM CS3000 R3.08.50. Total size in archive 654 Мb:

Centum CS 3000 R3.08.50.part01.rar
Centum CS 3000 R3.08.50.part02.rar
Centum CS 3000 R3.08.50.part03.rar
Centum CS 3000 R3.08.50.part04.rar
Centum CS 3000 R3.08.50.part05.rar
Centum CS 3000 R3.08.50.part06.rar
Centum CS 3000 R3.08.50.part07.rar

scada2005
Posts: 43
Joined: Thu Apr 29, 2010 5:43 am

Re: [LINK]: YOKOGAWA CENTUM CS3000

Post by scada2005 » Wed Sep 28, 2011 10:07 am

Hi bat_on,

do you have training documents?

bat_on
Posts: 12
Joined: Sat Mar 05, 2011 10:35 am
Location: Russia

Re: [LINK]: YOKOGAWA CENTUM CS3000

Post by bat_on » Wed Sep 28, 2011 5:16 pm

scada2005 wrote:Hi bat_on,

do you have training documents?
Educational documents in Russian lang:
Инженерный курс по системе Centum CS3000. Код курса CKEG

VaHG
Posts: 1
Joined: Fri Jan 06, 2012 6:13 am

Re: [LINK]: YOKOGAWA CENTUM CS3000

Post by VaHG » Fri Jan 06, 2012 6:21 am

Hi to everyone
bat_on wrote: Educational documents in Russian lang:
Инженерный курс по системе Centum CS3000. Код курса CKEG
bat_on, can You upload these documents? That would be great!
Очень надо, спасибо!

kostyc
Posts: 11
Joined: Tue Jul 29, 2008 9:17 am
Location: Russia

Re: [LINK]: YOKOGAWA CENTUM CS3000

Post by kostyc » Fri Jan 13, 2012 8:52 pm

Hi!
Please help.
I need a YOKOGAWA FCN-FCJ Logic Designer.

Thanks.

bat_on
Posts: 12
Joined: Sat Mar 05, 2011 10:35 am
Location: Russia

Re: [LINK]: YOKOGAWA CENTUM CS3000

Post by bat_on » Sun Jan 15, 2012 2:12 pm

VaHG wrote:Hi to everyone
bat_on wrote: Educational documents in Russian lang:
Инженерный курс по системе Centum CS3000. Код курса CKEG
bat_on, can You upload these documents? That would be great!
Очень надо, спасибо!
VaHG, Был на работе, в тундре, выложить такой объем не мог.
Есть белорусский сайт, где давали ознакомиться с русскоязычной документацией по CENTUM CS3000
http://belasusinc.com/belasusink.files/centum.html
На данный момент скачивание документации почему-то не доступно, выложу ту, что получил на курсах, документы практически идентичны:
rus_doc's Centum CS 3000

cemara
Posts: 31
Joined: Tue Mar 25, 2008 3:56 am
Location: Indonesia

Re: [LINK]: YOKOGAWA CENTUM CS3000

Post by cemara » Fri Jan 27, 2012 4:50 am

could anybody re-load cs3000 again please?
the above one is not active anymore.
[dead]

Dechnarong
Posts: 4
Joined: Thu Sep 19, 2013 3:44 am

Re: Request: YOKOGAWA CENTUM CS3000

Post by Dechnarong » Wed Jan 15, 2014 8:46 am

Hi,
Could anybody share the link for download the CENTUM CS 3000 R 3.09 and key code?
Thank you.
(clap)

Dechnarong
Posts: 4
Joined: Thu Sep 19, 2013 3:44 am

Re: Request: YOKOGAWA CENTUM CS3000

Post by Dechnarong » Thu Jan 16, 2014 4:33 pm

for whom interested.
Here are the link for dowload CENTUM CS 3000 R 3.09 and key code as below.
I got it in other forum.
Cadit : rott

Yokogawa CENTUM R30900
links:
1. http://www.datafilehost.com/d/f52e33c4
2. http://www.datafilehost.com/d/8fa83231
3. http://www.datafilehost.com/d/05774526
4. http://www.datafilehost.com/d/35f8980b

sajid
Posts: 2
Joined: Sat Mar 15, 2014 6:22 pm

Re: Request: YOKOGAWA CENTUM CS3000

Post by sajid » Mon Mar 17, 2014 7:55 pm

while installing get Network error... "Network not Installed" how to resolve it.
thank you in advance.

ofeliosimango
Posts: 5
Joined: Wed Jul 16, 2014 10:56 am

Re: Request: YOKOGAWA CENTUM CS3000

Post by ofeliosimango » Sat Jul 19, 2014 11:04 am

hi i got it but i have problem to install I did descompress but from this file I got one file with floppy disc virtual and one image disc and onether file no setup with .exe to execute??? Halp pleasse!!!

mahdii3375
Posts: 1
Joined: Sat Feb 10, 2024 5:36 am

Re: Request: YOKOGAWA CENTUM CS3000

Post by mahdii3375 » Sat Feb 10, 2024 5:39 am

hi
download links are dead. can anybody send me download link of centum cs3000??
thanks

Post Reply