plcforum.uz.ua

International PLC Forum
It is currently Wed Aug 23, 2017 10:32 pm

All times are UTC + 3 hours




Post new topic Reply to topic  [ 175 posts ]  Go to page Previous  1, 2, 3, 4  Next
Author Message
PostPosted: Thu Aug 21, 2014 10:56 pm 

Joined: Tue Jul 15, 2014 8:05 pm
Posts: 78
Location: https://www.youtube.com/channel/UC4SCHnh-IrKO6EPq2maMaMg
ognde wrote:
letranlong wrote:
vlad2006gr wrote:
letranlong , project on the memory card? Tried to intercept the exchange with the controller?


dear vlad2006
I have not project on the memory card. and also do not programs plc original. so I can't upload and download or exchange with the controller.
plaese help me
how to do exchange with the controller upload and download with controlled ?
how doing upload and download with controlled ?


Hey buddy,

Have you already used the unitelway driver to download with the correct cable and it´s not working?
You don´t have the application file correct?


dear ognde
I don't Have used the unitelway driver to download.
I Have used software twido swite version: 2.31.04 and used a wire cable TSXPCX3030-C USB 2.0 TO schneider twido series plc go to online with plc
before here, project on the plc. I created project on plc or I write program on plc
but before when I download progam to controller ( PC ==> PLC ) that time I have setting password for controller
but now when i online to controller again, this time me the forget password of (plc) controller and i am being loss program original. so i can't upload and download to controller.
when i online to controller, it's appears a box dialog the below here
twido suide and the plc applications aredifferent
immediate connection impossible
handware configuration are incompatible
PC ==> PLC transfer is impossible
PLC application is protected
PLC ==> PC transfer is forbidden

how is upload program plc?
so I can't upload and download or exchange with the controller.
plaese help me
how upload and download with controlled ?
how to do online with controlled ?


Top
 Profile  
 
PostPosted: Fri Aug 22, 2014 1:37 am 

Joined: Fri Jul 18, 2014 5:34 pm
Posts: 6
vlad2006gr wrote:
ognde wrote:
Quote:
Hey vlad2006gr i couldn´t download the file, would you mind send it again to me?


relink:
http://dfiles.ru/files/8i69j99vk
http://dfiles.ru/files/mxmzflrd9
or
http://www.4shared.com/rar/XuflXq0bba/b ... nlock.html
http://www.4shared.com/rar/tu5vO9Mpba/b ... nlock.html
Good luck!


Thanks bro, i will download as soon as i can open it in my computer. Thanks very much


Last edited by ognde on Fri Aug 22, 2014 2:08 am, edited 1 time in total.

Top
 Profile  
 
PostPosted: Fri Aug 22, 2014 1:40 am 

Joined: Fri Jul 18, 2014 5:34 pm
Posts: 6
letranlong wrote:
ognde wrote:
letranlong wrote:
vlad2006gr wrote:
letranlong , project on the memory card? Tried to intercept the exchange with the controller?


dear vlad2006
I have not project on the memory card. and also do not programs plc original. so I can't upload and download or exchange with the controller.
plaese help me
how to do exchange with the controller upload and download with controlled ?
how doing upload and download with controlled ?


Hey buddy,

Have you already used the unitelway driver to download with the correct cable and it´s not working?
You don´t have the application file correct?


dear ognde
I don't Have used the unitelway driver to download.
I Have used software twido swite version: 2.31.04 and used a wire cable TSXPCX3030-C USB 2.0 TO schneider twido series plc go to online with plc
before here, project on the plc. I created project on plc or I write program on plc
but before when I download progam to controller ( PC ==> PLC ) that time I have setting password for controller
but now when i online to controller again, this time me the forget password of (plc) controller and i am being loss program original. so i can't upload and download to controller.
when i online to controller, it's appears a box dialog the below here
twido suide and the plc applications aredifferent
immediate connection impossible
handware configuration are incompatible
PC ==> PLC transfer is impossible
PLC application is protected
PLC ==> PC transfer is forbidden

how is upload program plc?
so I can't upload and download or exchange with the controller.
plaese help me
how upload and download with controlled ?
how to do online with controlled ?


Hello, i will try to make a test with a twido plc here and after i test i will try to answer it for you.

Regards


Top
 Profile  
 
PostPosted: Fri Aug 22, 2014 6:50 pm 

Joined: Tue Jul 15, 2014 8:05 pm
Posts: 78
Location: https://www.youtube.com/channel/UC4SCHnh-IrKO6EPq2maMaMg
ognde wrote:
letranlong wrote:
ognde wrote:
letranlong wrote:
vlad2006gr wrote:
letranlong , project on the memory card? Tried to intercept the exchange with the controller?


dear vlad2006
I have not project on the memory card. and also do not programs plc original. so I can't upload and download or exchange with the controller.
plaese help me
how to do exchange with the controller upload and download with controlled ?
how doing upload and download with controlled ?


Hey buddy,

Have you already used the unitelway driver to download with the correct cable and it´s not working?
You don´t have the application file correct?


dear ognde
I don't Have used the unitelway driver to download.
I Have used software twido swite version: 2.31.04 and used a wire cable TSXPCX3030-C USB 2.0 TO schneider twido series plc go to online with plc
before here, project on the plc. I created project on plc or I write program on plc
but before when I download progam to controller ( PC ==> PLC ) that time I have setting password for controller
but now when i online to controller again, this time me the forget password of (plc) controller and i am being loss program original. so i can't upload and download to controller.
when i online to controller, it's appears a box dialog the below here
twido suide and the plc applications aredifferent
immediate connection impossible
handware configuration are incompatible
PC ==> PLC transfer is impossible
PLC application is protected
PLC ==> PC transfer is forbidden

how is upload program plc?
so I can't upload and download or exchange with the controller.
plaese help me
how upload and download with controlled ?
how to do online with controlled ?


Hello, i will try to make a test with a twido plc here and after i test i will try to answer it for you.

Regards


thank you very much
You are a great help.
see you soon
have a nice day
thank you again


Top
 Profile  
 
PostPosted: Fri Sep 12, 2014 10:08 pm 

Joined: Tue Jun 09, 2009 4:08 pm
Posts: 4
Location: India
Dear vlad2006gr, Can you help to unlock PL following the unity Pro project and DFB. https://www.sendspace.com/file/pz2x09
Thanks,
mseena


Top
 Profile  
 
PostPosted: Sun Sep 14, 2014 9:07 pm 

Joined: Tue Nov 20, 2007 10:08 pm
Posts: 734
Location: Belarus
mseena wrote:
Quote:
Dear vlad2006gr, Can you help to unlock PL following the unity Pro project and DFB

See PM.


Top
 Profile  
 
PostPosted: Fri Sep 26, 2014 6:30 pm 

Joined: Mon Jul 16, 2012 11:40 am
Posts: 6
sorry. My post is not about PL-7.
But it also about Schneider...
I have a PLC Twido TWDLMDA40D. When i try to upload a project from PLC to PC there is a message to enter a password.
I can upload project but can't change anything or save application without the password.
Can anyone tell me is it possible to find the password somewere at temporary files or in memory.
i have a ladder or list view of program. Hard way is to reenter all about 400 strings of project and a lot of constants, counters, timers and etc. But i warry about the value of constants, may be some setting i don't know about ....

Вижу тема по UnitiPro разных версий, но есть вопросы и по TwidoSoft.
может кто знает или сталкивался.
Есть контроллер Twido TWDLMDA40D. Сейчас я могу к нему подключиться и считать проект. Но проект защищен паролем. Поэтому проект не могу сохранить на компьютере, не могу изменять что-либо. Не допускается копировать проект в виде листинга в другой проект.
Можно, конечно, по строкам вбить в новом проекте такую же програму. не уверен насчет других составляющих проекта: константы, счетчики, таймеры, типы входов и, возможно, еще много всяких мелочей. не начем проверить такой вариант. пробовал поискать временные файлы в директориях для дальнейшего анализа. Пока ничего не нашел.
Да, сейчас пользуюсь TwidoSoft v3.5. Может попробовать старыми версиями?


Top
 Profile  
 
PostPosted: Sat Oct 04, 2014 3:50 pm 

Joined: Tue Nov 20, 2007 10:08 pm
Posts: 734
Location: Belarus
Я правильно понял?-
Quote:
Есть контроллер Twido TWDLMDA40D. Сейчас я могу к нему подключиться и считать проект.
Т.е. проект скачивается с контроллера TWDLMDA40D, и в программе вы видите все шаги программы? Только не можите сохранить.С таким не встречался, но большинство программ, при скачивании, сохраняют в ТМР директории все файлы и потом перекидывают в заданную. Проверьте при скачивании директории для временных файлов. Возможно там будет ваш проект.


Top
 Profile  
 
PostPosted: Mon Oct 06, 2014 12:10 pm 

Joined: Mon Jul 16, 2012 11:40 am
Posts: 6
да, все правильно.
я тоже про временные директории знал, и потому поискал в типовых папках операционной системы. Пока не нашел.
Для меня все равно есть радость. Повезло, что поставщики оставили старые версии программ в виде *.twd файлов. Они прекрасно открываются в "блокноте" и там нашел поле "pass" в открытом текстовом виде. его и ввел при считывании новой измененной версии. Совпало.
Где все таки система хранит временные файлы пока не нашел. Больше увлечен знакомством с программированием этого контроллера. Для меня это впервой. В основном Омрон или Брадлей.

Yes, I can transfer project from PLC to PC. But I can'tfind any temporary files at \AppData, \local\temp ...
But i a lucky boy. i had an old version of project from suppliers as *.twd file. It can be open as a xml file at Notepad. The password stored inside this file as a plain text.
I still interesting in to find some temporary storage for online openning project but not right now.


Top
 Profile  
 
PostPosted: Fri Oct 10, 2014 9:06 am 

Joined: Tue Nov 20, 2007 10:08 pm
Posts: 734
Location: Belarus
Quote:
Где все таки система хранит временные файлы пока не нашел.
Дело в том, что программа при сливании проекта может записывать его на диск либо без расширения, либо с другим расширением. Не *.twd. Плюс большинство программ кидают дополнительные файлы, с юзер ареа, состоянием битов и памяти, и хз еще что. Потом только программа пакует или наоборот, распаковывает в файл привычного вида. Смысл в вашем случае искать эти файлы - для определения пароля. Но раз вы его уже знаете, то нету. Разве, что для практики;) Я поступаю следующим образом: используя утилиту от сисинтерналс- Filemon.exe ищем куда программа ложит файлы, потом другой программой - Folder Find Text ищем там файлы с необходимым тектом, например паролем.


Top
 Profile  
 
PostPosted: Fri Oct 10, 2014 2:16 pm 

Joined: Mon Jul 16, 2012 11:40 am
Posts: 6
попробую поискать. может и утилиту поставлю.
сейчас больше увлечен/озадачен новой задачей. к контроллеру подключен управляемый пускатель с хитрым логическим контрольным модулем Tesys LUCC. Требуется разобраться с его ошибками передаваемыми по Modbus. это уже в другую тему.
Спасибо за участие.
I will try to find temporary files later.


Top
 Profile  
 
PostPosted: Thu Nov 13, 2014 6:09 am 

Joined: Thu Nov 13, 2014 5:50 am
Posts: 1
Dear vlad2006gr,

Can you help to unlock PL following the unity Pro project and DFB.

http://www.4shared.com/rar/p3Ysq59gce/D ... _Pass.html

Thanks,
Andry


Top
 Profile  
 
PostPosted: Mon Nov 17, 2014 11:07 pm 

Joined: Tue Nov 20, 2007 10:08 pm
Posts: 734
Location: Belarus
This project is compiled in version 7.0 XLS.
http://www.4shared.com/rar/-d4uxPuice/D ... _Pass.html
Good luck!


Top
 Profile  
 
PostPosted: Thu Nov 20, 2014 1:15 am 

Joined: Tue Dec 28, 2010 6:39 pm
Posts: 4
Dear vlad2006gr,

Can you help to unlock PL following the unity Pro project and DFB.

http://www.4shared.com/rar/r94PpPvgba/Documents.html

Thanks,
rida


Top
 Profile  
 
PostPosted: Thu Nov 20, 2014 7:54 pm 

Joined: Tue Nov 20, 2007 10:08 pm
Posts: 734
Location: Belarus
Download http://www.4shared.com/rar/boqABdrPce/M ... NLOCK.html
Good luck!


Top
 Profile  
 
PostPosted: Thu Apr 30, 2015 11:53 am 

Joined: Fri Apr 16, 2010 1:39 pm
Posts: 3
0vlad2006gr добрый день !!!

Хотел просить еще раз проконсультировать о том в каких файлах следует искать пароли для версий Юнити от 7.0 и выше ? Интересует пароль на всю программу, не только на блоки. Хочу разобраться в этом вопросе с вашими подсказками.

И есть еще один вопрос по Твидо. Есть один объект на нем контроллер Твидо, программа в контроллере на карте памяти. Программа закрыта паролем и есть доступ только к функциям RUN и STOP. Пароль естественно мне неизвестен. Существует ли возможность скачать такую программу из контроллера ???

Надеюсь на помощь в этих вопросах, заранее спасибо.


Top
 Profile  
 
PostPosted: Thu Apr 30, 2015 4:39 pm 

Joined: Thu Aug 29, 2013 7:11 pm
Posts: 62
Pooh wrote:
0vlad2006gr добрый день !!!

Хотел просить еще раз проконсультировать о том в каких файлах следует искать пароли для версий Юнити от 7.0 и выше ? Интересует пароль на всю программу, не только на блоки. Хочу разобраться в этом вопросе с вашими подсказками.


А чем не устраивает информация с первой страницы этого топика? Уже даже скриншоты с описанием даны. Влад конечно не всё рассказывает :) Есть ещё более простой способ посмотреть пароль на проект, даже если пароль не в открытом виде - кто ищет, тот найдёт.


Top
 Profile  
 
PostPosted: Tue May 05, 2015 11:10 am 

Joined: Fri Apr 16, 2010 1:39 pm
Posts: 3
Если бы информации с первой страницы было достаточно, я бы не задавал вопросы. С первых сообщений этой ветки утекло много времени и сменилось много версий программы.
Я нашел пароль на секции программы, приблизительно там же появляется пароль и на всю программу. Но можно ли как-то вскрыть зашифрованный пароль..? (h)


Top
 Profile  
 
PostPosted: Wed May 06, 2015 5:20 pm 

Joined: Thu Aug 29, 2013 7:11 pm
Posts: 62
Pooh wrote:
Если бы информации с первой страницы было достаточно, я бы не задавал вопросы. С первых сообщений этой ветки утекло много времени и сменилось много версий программы.
Я нашел пароль на секции программы, приблизительно там же появляется пароль и на всю программу. Но можно ли как-то вскрыть зашифрованный пароль..? (h)

Ну всё правильно, вы нашли где находится пароль, просто теперь пароль ещё и зашифрован. Надо всего-лишь знать как зашифрован пароль - данная инфо пока нигде не проходила, но алгоритм проще простого.


Top
 Profile  
 
PostPosted: Wed Sep 23, 2015 6:17 am 

Joined: Fri Dec 06, 2013 8:27 am
Posts: 1
Dear Vlad2006gr.

Could you please help me unlock unity pro project this file.

https://drive.google.com/file/d/0BxAlpH ... sp=sharing

Thank you very much


Top
 Profile  
 
PostPosted: Wed Sep 23, 2015 9:28 am 

Joined: Tue Nov 20, 2007 10:08 pm
Posts: 734
Location: Belarus
See PM.


Top
 Profile  
 
PostPosted: Wed Oct 07, 2015 8:03 am 

Joined: Wed Oct 07, 2015 7:56 am
Posts: 2
Hi!

I have a problem in my file with a section protected by password ... but I forgot the latter...
Can you help me ?

The link to the file: http://ovh.to/c1VXNWW

Thanks!
Jérémie


Top
 Profile  
 
PostPosted: Fri Oct 09, 2015 6:33 pm 

Joined: Tue Nov 20, 2007 10:08 pm
Posts: 734
Location: Belarus
In late October, I will be able to help .


Top
 Profile  
 
PostPosted: Wed Oct 28, 2015 9:49 pm 

Joined: Tue Nov 20, 2007 10:08 pm
Posts: 734
Location: Belarus
schutz wrote:
Quote:
Hi!
I have a problem in my file with a section protected by password ... but I forgot the latter...
Can you help me ?


http://www.4shared.com/rar/LEWI48f2ce/c ... nlock.html
Good luck!


Top
 Profile  
 
PostPosted: Thu Oct 29, 2015 9:21 am 

Joined: Wed Oct 07, 2015 7:56 am
Posts: 2
Thank you very much! (oo)


Top
 Profile  
 
PostPosted: Fri Oct 30, 2015 9:03 am 

Joined: Fri Oct 30, 2015 8:39 am
Posts: 5
Dear Experts,

I have seen in the forum and I have done unlock password for Unity Pro program. I use Unity Pr V.8.
My program is password protected with encryption.

After working on Hex editor this is what i get.
Header name="Project" version="0.0.559" dateTime="date_and_time#2014-12-31-14:1:49"
password="C8D8180D416C5DD4400A9655CAB64860EE30306461394E338B0610B1"
crypted="0"></contentHeader>...<commParameters>....<PLCAddress address="192.168.1.10"

How do i know the password.?

Program is available in the below link provided.
http://www.4shared.com/archive/27fE-NINce/CoGen.html

Please help.

Thanks & Regards,
Nivin
(nuser)


Top
 Profile  
 
PostPosted: Sat Oct 31, 2015 1:33 am 

Joined: Tue Nov 20, 2007 10:08 pm
Posts: 734
Location: Belarus
Nivin wrote:
Quote:
Dear Experts,

I have seen in the forum and I have done unlock password for Unity Pro program. I use Unity Pr V.8.
My program is password protected with encryption.

Project version 7.0
Password project- inddcc21
Password DFB- TYC31
Good luck!


Top
 Profile  
 
PostPosted: Sun Nov 01, 2015 7:12 pm 

Joined: Fri Oct 30, 2015 8:39 am
Posts: 5
Dear vlad2006gr,

Thanks a ton... You make it seem so simple..
I have no words to express my gratitude.. I needed the password desperately.

How did you do it..Just to know & learn..

(oo) (tyou)


Top
 Profile  
 
PostPosted: Sun Nov 08, 2015 12:34 pm 

Joined: Sat Nov 07, 2015 7:34 am
Posts: 2
Dear vlad2006gr

please help me to unlock the program. Our contractor locked the project and refuse to give password .
i know the password for station.apx but unable to find password for DFBs.
PM password please.
Uploaded Locked Files:
5-11-15.rar

Thanks


Top
 Profile  
 
PostPosted: Sun Nov 08, 2015 8:00 pm 

Joined: Sat Nov 07, 2015 7:34 am
Posts: 2
Thanks vlad2006gr.
You are great.


Top
 Profile  
 
PostPosted: Thu Dec 10, 2015 12:23 am 

Joined: Thu Dec 10, 2015 12:07 am
Posts: 4
Hello,

I need help with a password. This password is crypted and i don't unprotected DBF...

The project is uploaded at :
https://1fichier.com/?2ednslp5hf

Thank you in advance for your time.


Top
 Profile  
 
PostPosted: Thu Dec 10, 2015 8:07 am 

Joined: Tue Nov 20, 2007 10:08 pm
Posts: 734
Location: Belarus
Arnaud1 wrote:
Arnaud1 » Чт дек 10, 2015 12:23 am

Hello,

I need help with a password. This password is crypted and i don't unprotected DBF...

??????
In the project there is no password!


Top
 Profile  
 
PostPosted: Thu Dec 10, 2015 11:23 am 

Joined: Thu Dec 10, 2015 12:07 am
Posts: 4
Hello,
thanks for your answer. I am very stupid, i take many project for testing and it's the bad project uploaded.
http://up.lbzh.fr/uploads/566935f3e0643.stx
Thanks for your time and your help.


Top
 Profile  
 
PostPosted: Fri Dec 11, 2015 1:36 pm 

Joined: Tue Nov 20, 2007 10:08 pm
Posts: 734
Location: Belarus
Arnaud1 wrote:
Arnaud1 » Чт дек 10, 2015 11:23 am

Hello,
thanks for your answer. I am very stupid, i take many project for testing and it's the bad project uploaded.

No password:
http://up.lbzh.fr/uploads/566aa6a860605.rar
Good luck!


Top
 Profile  
 
PostPosted: Sat Dec 12, 2015 11:30 am 

Joined: Thu Dec 10, 2015 12:07 am
Posts: 4
Thank you very much. I will test it monday.
Can you explain to me how are you did it ?
Only software or with hardware ?

Мои искренние благодарности.


Top
 Profile  
 
PostPosted: Sat Dec 12, 2015 3:39 pm 

Joined: Tue Nov 20, 2007 10:08 pm
Posts: 734
Location: Belarus
Arnaud1 wrote:
Arnaud1 » Сб дек 12, 2015 11:30 am

Thank you very much. I will test it monday.
Can you explain to me how are you did it ?
Only software or with hardware ?

Only software and reversing. Do not forget to rename the file.
Good luck!


Top
 Profile  
 
PostPosted: Tue Dec 15, 2015 12:56 am 

Joined: Thu Dec 10, 2015 12:07 am
Posts: 4
THANK YOU VERY MUCH MISTER VLAD2006GR...

Can you make a tutorial with an example ? I think you're the best to make it.


Top
 Profile  
 
PostPosted: Tue Dec 15, 2015 1:36 am 

Joined: Thu Feb 11, 2010 10:57 am
Posts: 8
Hello Master VLAD2006GR.
I need your help.
Can You open attached projects DFB? (Program - Tasks - Mast - Sections.. Everything Locked)
and say to me what is passwords?

PLC1 Project;
https://www.dropbox.com/s/19o2kaqkvhrcf4q/PLC1.rar?dl=0

PLC2 Project;
https://www.dropbox.com/s/57pd74905ibwg7b/PLC2.rar?dl=0

With Best Regards.


Top
 Profile  
 
PostPosted: Tue Dec 15, 2015 11:42 pm 

Joined: Tue Nov 20, 2007 10:08 pm
Posts: 734
Location: Belarus
onderatsan wrote:
Hello Master VLAD2006GR.
I need your help.

See PM.


Top
 Profile  
 
PostPosted: Wed Dec 16, 2015 12:20 am 

Joined: Thu Feb 11, 2010 10:57 am
Posts: 8
Thank You very much Master.
Can You tell me, what was password / passwords? if possible.


With Best Regards.


Top
 Profile  
 
PostPosted: Wed Dec 16, 2015 9:36 pm 

Joined: Tue Nov 20, 2007 10:08 pm
Posts: 734
Location: Belarus
The password has been encrypted. Decoding was not in the password.


Top
 Profile  
 
PostPosted: Fri Apr 15, 2016 1:43 pm 

Joined: Mon Mar 07, 2016 2:08 pm
Posts: 9
dear vlad2006gr;

can you help me to unlock this project:

https://drive.google.com/open?id=0B7hg9 ... TNxUklZWXM

thank you


Top
 Profile  
 
PostPosted: Fri Apr 15, 2016 2:14 pm 

Joined: Tue Nov 20, 2007 10:08 pm
Posts: 734
Location: Belarus
houssamatif wrote:
can you help me to unlock this project:

https://drive.google.com/open?id=0B7hg9 ... TNxUklZWXM

password 198508
Good luck!


Top
 Profile  
 
PostPosted: Fri Apr 15, 2016 5:17 pm 

Joined: Mon Mar 07, 2016 2:08 pm
Posts: 9
thank you so much
it's very helpful
you are amazing !!!!!

(clap) (clap) (clap) (clap) (clap) (clap)


Top
 Profile  
 
PostPosted: Fri Apr 15, 2016 7:00 pm 

Joined: Tue Jul 15, 2014 8:05 pm
Posts: 78
Location: https://www.youtube.com/channel/UC4SCHnh-IrKO6EPq2maMaMg
letranlong wrote:
ognde wrote:
letranlong wrote:
vlad2006gr wrote:
letranlong , project on the memory card? Tried to intercept the exchange with the controller?


dear vlad2006
I have not project on the memory card. and also do not programs plc original. so I can't upload and download or exchange with the controller.
plaese help me
how to do exchange with the controller upload and download with controlled ?
how doing upload and download with controlled ?


Hey buddy,

Have you already used the unitelway driver to download with the correct cable and it´s not working?
You don´t have the application file correct?


dear ognde
I don't Have used the unitelway driver to download.
I Have used software twido swite version: 2.31.04 and used a wire cable TSXPCX3030-C USB 2.0 TO schneider twido series plc go to online with plc
before here, project on the plc. I created project on plc or I write program on plc
but before when I download progam to controller ( PC ==> PLC ) that time I have setting password for controller
but now when i online to controller again, this time me the forget password of (plc) controller and i am being loss program original. so i can't upload and download to controller.
when i online to controller, it's appears a box dialog the below here
twido suide and the plc applications aredifferent
immediate connection impossible
handware configuration are incompatible
PC ==> PLC transfer is impossible
PLC application is protected
PLC ==> PC transfer is forbidden

how is upload program plc?
so I can't upload and download or exchange with the controller.
plaese help me
how upload and download with controlled ?
how to do online with controlled ?

dear everybody
please help me


Top
 Profile  
 
PostPosted: Tue Jun 28, 2016 4:34 pm 

Joined: Tue Jun 28, 2016 12:35 pm
Posts: 1
Уважаемый Влад возможно вы мне сможете помочь? Часто возникают вопросы со станком, иногда причину проблемы приходится долго искать
https://drive.google.com/open?id=0B6Nle ... 01FM0ZUcVk
https://drive.google.com/file/d/0B6Nleu ... sp=sharing
Премного благодарен.


Top
 Profile  
 
PostPosted: Wed Jul 06, 2016 9:31 pm 

Joined: Tue Nov 20, 2007 10:08 pm
Posts: 734
Location: Belarus
alik-sobaka wrote:
Уважаемый Влад возможно вы мне сможете помочь?

See pm.
Good luck!


Top
 Profile  
 
PostPosted: Wed Jul 06, 2016 10:20 pm 

Joined: Tue Nov 20, 2007 10:08 pm
Posts: 734
Location: Belarus
letranlong wrote:
PC ==> PLC transfer is impossible
PLC application is protected
PLC ==> PC transfer is forbidden

Тут напишу по русски. В Pl7 и в Unity после компиляции программы образуется образ для загрузки в карту памяти BinAppli (это если программу *.stu открыть в винраре она будет видна) . Если из карты памяти контролера через кардридер скачать программу, так это и будет BinAppli , только преобразованный.В Unity можно открыть программу любой версии. Переименовать файл *.STU в *.STA, и он откроется. Но конечно не будет DTM. Так вот в *.STA файле и находится этот BinAppli.
Я достал карту из запароленого (PLC ==> PC transfer is forbidden), скачал через кардридер ноутбука. Преобразовал в BinAppli , вставил в *.STA и открыл в Unity. Но вообще работа трудная.

In Pl7 and in Unity program after compiling formed image to boot to BinAppli memory card (if it is a program * .stu open vinrar it will be visible). If the memory controller via a card reader to download maps, so it will be BinAppli, only Unity preobrazovannyy.V can open any version of the program. Rename the file to * .STU * .STA, and it will open. But of course there will be the DTM. So in * .STA file and this is BinAppli.
I got a card from the password-protected (PLC ==> PC transfer is forbidden), downloaded through a laptop card reader. I convert to BinAppli, put in * .STA and opened in Unity. But in general the work difficult.


Top
 Profile  
 
PostPosted: Thu Jul 07, 2016 9:47 am 

Joined: Thu Aug 29, 2013 7:11 pm
Posts: 62
Vlad2006gr,

тебе пора уже свой бизнес открывать по подбору паролей :)

Ты пишешь "Преобразовал в BinAppli , вставил в *.STA и открыл в Unity. Но вообще работа трудная. " - что ты имеешь ввиду под "преобразовал"?

И ещё вопрос - ты уже научился находить "закодированный" пароль от Unity проектов?


Top
 Profile  
 
PostPosted: Thu Jul 07, 2016 10:09 am 

Joined: Tue Nov 20, 2007 10:08 pm
Posts: 734
Location: Belarus
Преобразовал это то,что файл BinAppli и скаченный с карты как бы сегментированный. Сегмегнты в обоих файлах одинаковы, но находятся в разных местах. Поэтому их нужно переставить.
SE_support wrote:
ещё вопрос - ты уже научился находить "закодированный" пароль от Unity проектов?

Ну про это я говорить не хочу.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 175 posts ]  Go to page Previous  1, 2, 3, 4  Next

All times are UTC + 3 hours


Who is online

Users browsing this forum: Bing [Bot], Google Feedfetcher and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by International PLCforum® Forum Software © PLCforum
Mobile version