plcforum.uz.ua
http://plcforum.uz.ua/

IWLAN ACCESS POINT SCALANCE W788-1PRO
http://plcforum.uz.ua/viewtopic.php?f=27&t=23278
Page 1 of 1

Author:  zxcslo [ Mon Oct 26, 2015 11:38 am ]
Post subject:  IWLAN ACCESS POINT SCALANCE W788-1PRO

I have Siemens SCALANCE Access Point w788-1PRO for use in USA (6GK5788-1AA60-2AB0). https://mall.industry.siemens.com/mall/sl/si/Catalog/Product/6GK5788-1AA60-2AB0

Does anybody know the admin password? (which you can get only from Siemens support, if you are certified Siemens Integrator... (ev) )
Apparently admin password for USA version is different from version for USE OUTSIDE THE USA (admin, admin).

Author:  shlaky [ Mon Nov 02, 2015 6:47 am ]
Post subject:  Re: IWLAN ACCESS POINT SCALANCE W788-1PRO

i have the same radio AP (same mlfb) , and the pass is
User: Admin
pass: admin

or

User: User
Pass: user

reset the radio of the button rear for restore pass and user default

Author:  zxcslo [ Mon Nov 02, 2015 9:29 am ]
Post subject:  Re: IWLAN ACCESS POINT SCALANCE W788-1PRO

I'm sorry, but it isn't....

There are two kinds of AP's:
- one for use INSIDE USA (6GK5788-1AA60-2AB0)
- and one for use OUTSIDE OF USA (6GK5788-1AA60-2AA0)

For use OUTSIDE USA, user/password is : Admin, admin,
but for USA is not.

I've been looking for this for 3 years now, but no luck.... :(

Author:  Answers to FAQs [ Mon Nov 02, 2015 9:17 pm ]
Post subject:  Re: IWLAN ACCESS POINT SCALANCE W788-1PRO

Is the same manual:
https://support.industry.siemens.com/cs ... w/79689667
manual wrote:
Validity of the configuration manual
This Configuration Manual covers the following products:
SCALANCE W748-1 M12
SCALANCE W748-1 RJ-45
SCALANCE W788-1 M12
SCALANCE W788-2 M12
SCALANCE W788-2 M12 EEC
SCALANCE W788-1 RJ-45
SCALANCE W788-2 RJ-45
SCALANCE W786-1 RJ-45
SCALANCE W786-2 RJ-45
SCALANCE W786-2IA RJ-45
SCALANCE W786-2 SFP
--—
Enter your password in the "Password" input box.
When you log on for the first time or following a "Restore Factory Defaults and Restart", enter the standard password in the "Password" input box.
- "admin": standard password "admin"
- "user": standard password "user"

Author:  zxcslo [ Mon Nov 02, 2015 10:18 pm ]
Post subject:  Re: IWLAN ACCESS POINT SCALANCE W788-1PRO

My AP's are now 3 years old. I ordered them by mistake. I needed them for europe, but I mixed the last 4 order digits (2AA0 (non US) vs 2AB0 (US)).
In the manual from 11/2012 (62382125_PH_SCALANCE-W700-WBM_76.pdf) stays:

5.1.1 Changing device password
Introduction
Requirement
Procedure
When you log on the first time, you will be asked to change the password for the "admin"
user.
● The default password for the "admin" user is "admin".
● The default password for the "user" user is "user".
For the US variant of the device, the default password for the "admin" user has been
changed. Specialist personnel for professional installations can obtain the password from
Siemens Service & Support.


Maybe this days (years) they changed the passwords and they are the same for USA and non USA versions, I don't know.
But in 2012 they were not.

I contacted my Siemens sales representative many times for replacing the AP's with non USA versions, but didn't want to hear it. All sales are final, if it's your (mine, customers) mistake. Also they didn't want to give me the passwords, because the AP's aren't mounted in USA. (ev)
So now I have 6 AP's USA variant (with more than 5000€ value), which we can't use them, because I can't get the USA password.

Author:  Serg15616 [ Thu Jan 25, 2018 2:38 pm ]
Post subject:  Re: IWLAN ACCESS POINT SCALANCE W788-1PRO

the default password of the US versions of Scalance W is:
scalance-wlan

Author:  CoMod [ Thu Jan 25, 2018 7:19 pm ]
Post subject:  Re: IWLAN ACCESS POINT SCALANCE W788-1PRO

http://s7detali.narod.ru/NET/Scalance_M875.html
Scalance PDF wrote:
Open the web-based management of the SCALANCE M875.
Enter the address https://192.168.1.1 in an internet browser.
You are prompted to enter the user name and the password.
Using factory settings are:
User name: admin
Password: scalance

Author:  zxcslo [ Thu Jan 25, 2018 8:26 pm ]
Post subject:  Re: IWLAN ACCESS POINT SCALANCE W788-1PRO

CoMod wrote:
http://s7detali.narod.ru/NET/Scalance_M875.html
Scalance PDF wrote:
Open the web-based management of the SCALANCE M875.
Enter the address https://192.168.1.1 in an internet browser.
You are prompted to enter the user name and the password.
Using factory settings are:
User name: admin
Password: scalance
Serg15616 wrote:
the default password of the US versions of Scalance W is:
scalance-wlan

Thank you guys very much. (tyou) (gpost)
I'll try this tomorrow at work. I can't beleive that it's been 6 years now that I have this AP's. Maybe I can use them now... :lol:

Page 1 of 1 All times are UTC + 3 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/