plcforum.uz.ua
http://plcforum.uz.ua/

[Request] IEC 60870-5-104 and IEC 60870-5-101
http://plcforum.uz.ua/viewtopic.php?f=19&t=15056
Page 1 of 1

Author:  Popescu Stefan [ Mon Mar 21, 2011 11:55 pm ]
Post subject:  [Request] IEC 60870-5-104 and IEC 60870-5-101

Hi
I'm looking for IEC 60870-5-104 and IEC 60870-5-101 standards. Please share if you have them :)
Best regards

Author:  CHANt [ Tue Mar 22, 2011 8:10 am ]
Post subject:  Re: [Request] IEC 60870-5-104 and IEC 60870-5-101

Sorry, only in Russian
http://narod.ru/disk/8087551001/GOST_TM.rar.html
Quote:
Только на русском
Архив включает в себя ГОСТ Р МЭК серии 870. Части №1,2,3,4,5,6.
В 5 части присутствуют протоколы, столь популярные в электроэнергетике для систем телемеханики - 101,103 и 104
Там же в папке, есть рекомендации для разработчика по реализации 101 и 104 протоколов от Системного оператора ЕЭС России

Author:  Popescu Stefan [ Tue Mar 22, 2011 12:19 pm ]
Post subject:  Re: [Request] IEC 60870-5-104 and IEC 60870-5-101

Thanks but i need in english :)

Author:  dsekulic [ Tue Mar 22, 2011 2:53 pm ]
Post subject:  Re: [Request] IEC 60870-5-104 and IEC 60870-5-101

Hi,
Look here

viewtopic.php?f=3&t=15053&p=43300&hilit=60870#p43300

regards

Author:  Popescu Stefan [ Wed Mar 23, 2011 12:39 am ]
Post subject:  Re: [Request] IEC 60870-5-104 and IEC 60870-5-101

Thanks a lot :) exaclly what i needed.

Author:  relay [ Fri Aug 12, 2011 5:26 pm ]
Post subject:  Re: [Request] IEC 60870-5-104 and IEC 60870-5-101

here a new simulator release (demo working 5 min)
http://www.mitraware.com/

Author:  CHANt [ Fri Aug 12, 2011 7:26 pm ]
Post subject:  Re: [Request] IEC 60870-5-104 and IEC 60870-5-101

Freeware simulator IEC 104 Slave
Language - Russian
IEC104Slave.rar

Sources for C++ IEC 870-5-101/104 Master / Slave, + lib+demo.exe
Language - English
Lib870-5Demo.rar

Author:  duoble004 [ Wed Aug 23, 2017 2:49 pm ]
Post subject:  Re: [Request] IEC 60870-5-104 and IEC 60870-5-101

I was cracked this software
IEC 870-5-104 Simulator version 1.3.7

Product key Features:

Easy to use Simulator for IEC 870-5-104 protocol
Simulate master and slave protocol
Support multiple master for slave device
Support structure and unstructure point address
Suitable for troubleshoting and communication test
Monitor raw data exchange
Translate raw data into more meaningful information
Help to develop SCADA/HMI project wihout connected with the real RTU
Simulate Command and Feedback Status
Simulate Setpoint and Feedback Analog
Simulate Step Command and Feedback Step Position
Import master and slave tags from excel file
Download:https://drive.google.com/file/d/0BydlY7UxiljGdTk1SE52Y1BDRGc/view?usp=sharing
IEC 870-5-101 Simulator
Product key Features:

Easy to use simulator tool for IEC 60870-5-101 protocol
Simulate master and slave protocol
Raw Data capture by using two serial ports
Modem dialup on master device
Support structure and unstructure point address
Support balance and unbalance data transmission
Suitable for troubleshoting and communication test
Monitor raw data exchange
Translate raw data into more meaningful information
Help to develop SCADA/HMI project wihout connected with the real RTU
Simulate Command and Feedback Status
Simulate Setpoint and Feedback Analog
Simulate Step Command and Feedback Step Position
Import master and slave tags from excel file

Download: https://drive.google.com/file/d/0BydlY7UxiljGRy1fOGp4d1FjU28/view?usp=sharing
OPC Explorer Version 1.0.2
Product key Features:

Support OPC Data Access 1.0 and 2.0
Connect to multiple OPC Servers
Connect to Local Or Remote OPC Server
Browse OPC Server tags
Scaling for Analog data points
Historical records, Save the data changes
Dowload: https://drive.google.com/file/d/0BydlY7UxiljGc21lVzhOVnk2RGs/view?usp=sharing

If you see errors contact me!

Page 1 of 1 All times are UTC + 3 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/