Page 1 of 1

[LINK]: Drive Window for ABB

Posted: Thu Jul 17, 2008 10:58 am
by Prods
Hi, I am looking for the program Drive window for parametrization of ABB drives. Any help :) ???

Posted: Fri Jul 18, 2008 1:34 pm
by Link
DriveWindow v2.2
I never tested this program and I do not know if it is necessary lic
57030 KB
http://rapidshare.com/files/130639872/A ... w_v2.2.rar

regards

Posted: Wed Jul 23, 2008 6:58 pm
by Link
And what about drive window light 2
Hello,

maybe this one:

http://rapidshare.com/files/131916688/D ... wLight.rar

never used it but the readme shows 2003 as release date...

Please, is there anybody here that knows the pinout for the DB9->RJ45 cable ???

Thanks.

Thx

Posted: Thu Jul 24, 2008 9:54 am
by Prods
Thank you rack123.
This is what I need it :)

Posted: Sat Sep 20, 2008 9:45 am
by Link
I found the cable and draw the pinout:

http://rapidshare.com/files/146811604/abb_rj_2_db9.rar

Tested on ACH550 with drivewindow 2.6, works fine!

Posted: Thu Sep 25, 2008 5:26 pm
by Link
I don't remeber where saved the original link, so I've compressed the setup folder and reupped here:
DriveWindow 2.6
http://rapishare.com/files/148332125/DWL26.rar

or

http://www.megaupload.com/?d=YTISOI3D

about 20Mb (85Mb uncompressed).

No password, please remove all the "*" for the correct links ( I don't like the web spiders).

If the setup not works correctly from a hd folder try to burn a cdrom with all the files/folders that are in rar.

Acs800

Posted: Fri Dec 05, 2008 6:19 pm
by pb123
Does any one have a pinout for the ABB ACS800 rj12 to DB9

Thanks

which software far ACS800

Posted: Fri Jan 09, 2009 3:18 pm
by PLC_ITA
I have tryed DWL 2.6 but a ASC800 is'nt recognized. Max ACS550 is supported.

Anyone can help me ?

Thank you

Posted: Sat Jan 10, 2009 3:52 am
by Umencho
Hello,

Did you try with DriveWindow v2.2? From most's link. Works without lic. I use this for ASC600 and ASC800. Connection by PCMCI card (NDPA-02 DDCS/PC card adapter) + NDPC-12 card cable (10Mb optical transmitter/receiver) + FO cable.

reagrds

Re: which software far ACS800

Posted: Thu Feb 05, 2009 3:30 am
by kevin0175
PLC_ITA wrote:I have tryed DWL 2.6 but a ASC800 is'nt recognized. Max ACS550 is supported.

Anyone can help me ?

Thank you
DriveWindow Light 2.7
DriveWindow Light is a commissioning and maintaining tool
for ACS140, ACS160, ACS350, ACS400, ACH400, ACS550,
ACH550 DCS400 and DCS800 drives. Also following ASC600 and ACS800
applications are supported: standard, spinning control and
pump control. DriveWindow Light is designed to run under the
Microsoft Windows NT4.0 (SP6), Windows 2000, Windows XP or
Windows Vista operating systems on IBM -compatible PCs.

Posted: Fri Jul 10, 2009 8:01 pm
by arfineira
Does any one have a pinout for the ABB ACS800 rj12 to DB9 ?
Is possible to configure any serial port COM to communicate with ACS800 ?

Re:

Posted: Tue Nov 10, 2009 4:16 am
by ntban
the link of DWL26 on Rapidshare is broken !

Please, Re-Upload again ?

Thanks

Re: [LINK]: Drive Window for ABB

Posted: Thu Feb 11, 2010 7:35 am
by stojakovicv
I have ACS-CP-A control panel, but it is not working http://www.abb.com/product/us/9AAC113396.aspx

I have found in user manual that I need some OPCA-02 adapter cable for this drive.

Is this correct cable: http://rapidshare.com/files/146811604/abb_rj_2_db9.rar ?

So I downloaded Drivewindow Light. Is it possible to connect to drive over 8-pin RJ45 connector.
Does anyone have cable pinout for ACS350 drive?

Re: [LINK]: Drive Window for ABB

Posted: Thu Feb 11, 2010 7:39 am
by brave_eagle
The DWL 2.92 had already released

Re: [LINK]: Drive Window for ABB

Posted: Sun Feb 21, 2010 7:34 pm
by pconline
Can someone uplad 2.7?
Because 2.92 is upgrade for Drivewindow light 2.7

Re: [LINK]: Drive Window for ABB

Posted: Mon Mar 08, 2010 10:33 am
by pconline
I found DWL 2.8 You can download it from http://rapidshare.com/files/360563073/dwl_2.8.rar
You can use service pack to upgrade to 2.93. It's downloadable from ABB
Regards.

Re: [LINK]: Drive Window for ABB

Posted: Sun Sep 12, 2010 10:01 pm
by azamo12
hi any one can upload DriveWindow 2.30

Re: which software far ACS800

Posted: Wed Oct 05, 2011 7:13 pm
by Artem
I have DWL 2.92. Can I communication with ACS-800 this program. I have DB9->RJ45 cable ABB?
Thanks.

Re: [LINK]: Drive Window for ABB

Posted: Thu Oct 06, 2011 6:35 am
by Linkinx64
Artem wrote:I have DWL 2.92. Can I communication with ACS-800 this program. I have DB9->RJ45 cable ABB?
You need NPCU-1 adapter and cable for RS485. Then you can. But only for reading/writing parameters of standard software and basic control (start/stop/fwd/rev), due to link speed via RS232 is too slow.

Can anyone upload DriveWindow 2.3 here?

Re: [LINK]: Drive Window for ABB

Posted: Tue Dec 27, 2011 2:03 pm
by Sleepwalker
Hello all

How to activate "Loading packages" in DriveWindow?
I have checked in help file info is that "special license..." need "...to be entered into DriveWindow".
Where can I find this license and how to enter it?

Thanks in advance

Re: [LINK]: Drive Window for ABB

Posted: Mon Jan 07, 2013 11:14 pm
by rosco87

Re: [LINK]: Drive Window for ABB

Posted: Wed Jan 16, 2013 8:36 pm
by illarra
I found how to make the RJ45 to DB9 cable. Is the comunication faster using this cable than using the RS232?

Re: [LINK]: Drive Window for ABB

Posted: Thu Jan 17, 2013 9:25 am
by Linkinx64
1. http://www.4shared.com/rar/CpRDWGM7/dri ... t_293.html
2. The same. The difference is only in connector type.

Re: [LINK]: Drive Window for ABB

Posted: Thu Jan 17, 2013 4:10 pm
by illarra
Thank you

Re: [LINK]: Drive Window for ABB

Posted: Wed Mar 06, 2013 7:08 pm
by esantoshex
Linkinx64,

Please... Can you upload again the DriveWindow 2.2 or 2.3 on another server? Rapidshare is broken (exceed daily limit)....

Thanks a lot!

Best regards,
Edsan

Re: [LINK]: Drive Window for ABB

Posted: Sun Mar 10, 2013 5:01 pm
by Linkinx64
http://www.filefactory.com/file/ooit37b ... _v2.30.zip
Inform when you're done with the download - I will delete it.

Re: [LINK]: Drive Window for ABB

Posted: Mon Jul 01, 2013 6:49 pm
by Rkha Skha
rosco87 wrote:DriveWindow light
2.7 here :
http://rapidshare.com/files/2000229200/DWL2.7.RAR
Thanks for this buddy :-)
Just looking for this link...

Re: [LINK]: Drive Window for ABB

Posted: Thu Aug 29, 2013 8:28 am
by PaulMall
Linkinx64 wrote:http://www.filefactory.com/file/ooit37b ... _v2.30.zip
Inform when you're done with the download - I will delete it.
Mr. Linkinx64,
Could you please repost?
Paul Mall

Re: [LINK]: Drive Window for ABB

Posted: Tue Sep 23, 2014 8:52 am
by MaxS
Someone has DriveWindow Light v2.94?

I have DWL v2.93 and such problem:
Error Message
Error occurred while uploading parameters. Check the connection and try again.
Cause
The connected drive’s application software is not supported by DWL.

Frequency converter ACS550 firmware (parameter 3301) = 313dh
Test Date (parameter 3303) = 11.27

DWL v2.93 release date 2010
On the ABB site not files for upgrade. If I right understand software for all FC released after 2010 can buy only. :(

Re: [LINK]: Drive Window for ABB

Posted: Fri Nov 07, 2014 3:05 am
by MaxS
I alread have a fault like this before...
I'm solved after update the parameters file of the ACS350/550.

Download link:

http://library.abb.com/global/scot/scot ... 0c003a0305

(thnx)
This update for DWL 2.63 (2007-07-02). I have DWL 2.93 and my files of parameters is newer (2009-2010).

Re: [LINK]: Drive Window for ABB

Posted: Fri Jan 09, 2015 12:42 pm
by Ramomkosta
This update for DWL 2.63 (2007-07-02). I have DWL 2.93 and my files of parameters is newer (2009-2010).[/quote]


Yes its true,but someday this fault occur to me,and my DWL is 2.93 to...
But I try to change this library in that link,and after that its works...


"In electronics is proven that there is not an exact science.
If we do not try we will never know if it works."
Ramomkosta

Re: [LINK]: Drive Window for ABB

Posted: Sat Feb 21, 2015 6:29 pm
by jovancha
Hi, can someone upload ABB drivewindow? Links here are dead.
Thank you.

Re: [LINK]: Drive Window for ABB

Posted: Thu Feb 26, 2015 10:52 am
by Petrozawodsk

Re: [LINK]: Drive Window for ABB

Posted: Thu Nov 05, 2015 6:41 am
by MaxS
DriveWindow Light 2.93:
http://my-files.ru/opx7zh.DriveWindow%2 ... 202.93.rar

Cable pinout:
http://my-files.ru/1vy4ce.OPCA-02.rar

Anybody have DWL 2.94?
On the ABB site available update from DWL 2.94 to 2.95:
http://search-ext.abb.com/library/Downl ... ion=Launch

Re: [LINK]: Drive Window for ABB

Posted: Fri Nov 06, 2015 6:46 am
by MaxS
Old links (in before message) is not good.

DriveWindow Light 2.93:
http://my-files.ru/opx7zh

Cable pinout:
http://my-files.ru/1vy4ce

Re: [LINK]: Drive Window for ABB

Posted: Fri Nov 06, 2015 6:52 am
by MaxS
If somebody have DWL 2.94, give link please. (sos)

Re: [LINK]: Drive Window for ABB

Posted: Thu May 19, 2016 5:59 pm
by ufuk82
If somebody have DWL 2.94, give link please.

Re: [LINK]: Drive Window for ABB

Posted: Fri Nov 04, 2016 8:05 am
by eggman14
Hi all,

i have drive windows light 2.3 and also 2.93.
Can anyone upload links to all the versions again in between

ie 2.4 2.5 2.6 2.7 2.8

and the cable pinout as all the rapidshare links etc are broken.

Thanks in advance

Re: [LINK]: Drive Window for ABB

Posted: Sun Nov 20, 2016 9:56 am
by Lemajd
Hi All,

Any update or good link to be shared about ACS drivers software?

Regards

Re: [LINK]: Drive Window for ABB

Posted: Fri Jun 01, 2018 7:52 pm
by eggman14
Lemajd wrote:Hi All,

Any update or good link to be shared about ACS drivers software?

Regards

I have them working up to 2.93. I have the 2.94 to 2.95 updater but not the version 2.94

I haven't shared for a while but can provide dropbox. let me know if required

Re: [LINK]: Drive Window for ABB

Posted: Wed Dec 05, 2018 3:06 pm
by jbomson
need dwl 2.94 pl.help

Re: [LINK]: Drive Window for ABB

Posted: Sat Dec 08, 2018 8:22 pm
by vlad2006gr
eggman14 wrote:I have them working up to 2.93. I have the 2.94 to 2.95 updater but not the version 2.94
I haven't shared for a while but can provide dropbox. let me know if required
Create a reg file with such content and run it.

Code: Select all

Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths\DWL2.exe]
@="C:\\Program Files (x86)\\ABB\\DriveWindow Light\\DWL2.exe"
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall\DriveWindow Light]
"DisplayVersion"="2.94"
Download and install update from DWL 2.94 to 2.95
http://search-ext.abb.com/library/Downl ... ion=Launch
Reg file for Windows 7. For Win XP, you need to edit a little. I think you figure it out.

Re: [LINK]: Drive Window for ABB

Posted: Sat Dec 15, 2018 4:34 pm
by jbomson
Thank you

After adding registry (windows 10), i am able to install dwl 2.95 through file upgrade 2.94 to 2.95.

https://search-ext.abb.com/library/Down ... ion=Launch

Re: [LINK]: Drive Window for ABB

Posted: Wed Jan 30, 2019 8:56 am
by boont
Please post a link to download DriveWindow 2.4 or 2.3! Really needed. I can not find anywhere.

Re: [LINK]: Drive Window for ABB

Posted: Tue Feb 12, 2019 7:58 am
by vlad2006gr
boont wrote:Please post a link to download DriveWindow 2.4 or 2.3! Really needed. I can not find anywhere.
http://www.filefactory.com/file/ooit37b ... _v2.30.zip
Good luck!