[?]: Bosh Rexroth software

привода и частотники
Post Reply
DAS
Posts: 11
Joined: Mon Dec 25, 2006 8:53 am
Location: Ukraine

[?]: Bosh Rexroth software

Post by DAS » Fri Sep 28, 2007 12:16 am

Hi everybody!

I have following system manufactured by Bosh Rexroth:

IndraDrive control CSH01.1C-PL-EN2-NNN-... with MMC card + touch panel VCP 11.1
I need the soft for these to have a possibility to change, for the first, the parameters of the drive and second - a little change the program on the panel.
Do anybody know where to get it? I need it very much!
Thanks a lot!!! :)

---------------------------------------------
Привет всем!

Имеется следующая система производства Bosh Rexroth:

IndraDrive управляющая силовая часть CSH01.1C-PL-EN2-NNN-... with MMC картой памяти + сенсорная панель VCP 11.1
Нужен софт под енто все дело, чтоб параметры управления двигателем поменять и адаптировать програмку панели под параметры.
Есть у кого-нибудь эта софтина? Очень надо!
Большое сенькс!

Some minutes ago I've found some soft on Bosh site - WinStudio 6.5. Does anybody know, it's what I need? Or what is that soft for?
Вот нашел на сайте Боша - WinStudio 6.5. Кто-нить знает, это то что надо? Или для чего он?
--------
3:43 |
--------
Think I've found the correct soft - IndraWorks. But where to get it? And the license ... ? :)
Думаю я нашел, то что надо - IndraWorks. Вот только где его достать и как быть с лицензией? :)

serdarizbudak
Posts: 2
Joined: Mon Oct 01, 2007 5:58 am
Location: Turkey

Post by serdarizbudak » Mon Oct 01, 2007 6:07 am

You need Drivetop Software and VİComposer .
Drivetop on web : http://www.boschrexroth.com/business_un ... /index.jsp.

DAS
Posts: 11
Joined: Mon Dec 25, 2006 8:53 am
Location: Ukraine

Post by DAS » Tue Oct 02, 2007 6:41 am

Thanks!
And what about VIcomposer? There is only Service Pack for one on the bosch-rexroth site.
Really nobody have worked with such hardware?

Спасибо!
А как насчет VIcomposer? Там на сайте токо сервис пак для оного.
Неужели никто не работал с таким железом?

swallate
Posts: 7
Joined: Fri Sep 19, 2008 12:27 am
Location: America

Post by swallate » Thu Nov 13, 2008 6:36 am

Does anybody have "Motion Manager" software for CLM?

most
Posts: 431
Joined: Sat Oct 22, 2005 7:17 am
Location: Europe

Post by most » Sun Nov 16, 2008 10:00 pm

swallate wrote:Does anybody have "Motion Manager" software for CLM?
go to ftp://hao888:hao333@hao009.3322.org:65530
folder delete and download "Bosch.Rexroth.Indraworks.v7.04.WiNNT2K-oDDiTy"
in emule you find full software, 3 cds
most

swallate
Posts: 7
Joined: Fri Sep 19, 2008 12:27 am
Location: America

Post by swallate » Tue Nov 18, 2008 3:34 am

Thanks, sir.Good luck.

zrfengplc
Posts: 27
Joined: Wed Mar 14, 2007 4:40 am
Location: China

Post by zrfengplc » Sun Mar 22, 2009 9:40 am

I need Rexroth MAC8 System Software ECL-Win and manual, PPC Software VisualMotion and manual.

Thank you.

rator
Posts: 9
Joined: Thu Mar 13, 2008 10:44 pm
Location: Europe

Re: [?]: Bosh Rexroth software

Post by rator » Thu Feb 03, 2011 8:37 pm

I've download indraworks 7.0.4 but I can't find the motion manager, can you help me please?

cook
Posts: 15
Joined: Thu Nov 13, 2008 4:27 pm

Re: [?]: Bosh Rexroth software

Post by cook » Sat Mar 12, 2011 2:20 pm

Hello,

Somebody has a new of Indraworks version which works under Windows 7 ?

Thanks !

MRT_RYLMZ
Posts: 1
Joined: Thu Aug 04, 2011 11:57 am

Re: [?]: Bosh Rexroth software

Post by MRT_RYLMZ » Thu Aug 04, 2011 12:30 pm

I can share my Indraworks V11 copy, but I don't have a rapidshare or like another user account. In fact, I can upload this files if I don't need a premium user rights. Please give me an advice how it can be done

sania
Site Admin
Posts: 1372
Joined: Sat Aug 13, 2005 6:15 am
Contact:

Re: [?]: Bosh Rexroth software

Post by sania » Thu Aug 04, 2011 8:38 pm

upload to rapidshare & send link in PM to admins
you can see viewtopic.php?t=4977

Umencho
Posts: 508
Joined: Mon Jul 16, 2007 12:28 pm
Location: Europe

Re: [?]: Bosh Rexroth software

Post by Umencho » Thu Nov 22, 2012 1:17 pm

Some news here?

daniel0418
Posts: 2
Joined: Wed Oct 25, 2023 4:14 am

Re: [?]: Bosh Rexroth software

Post by daniel0418 » Thu Dec 21, 2023 4:33 am

Hi. Anyone have VisualMotion 11v06 (R911309195) with Indralogic 1.6. for PPC-R22.1. SWA-VMT*PC-INB-11VRS-D0-CD650

Post Reply