Hello colleagues!
There is a packaging machine with an A1000 drive on a conveyor.
Five signals come from the controller.
1. Run forward
2. Jog
3. Reset alarm
4. Emergency stop
5. Transporter
Signals Jog, Emergency stop, Reset alarm work adequately (standard), ON is active.
The "Run forward" signal is always ON (unless there is an alarm). The signal "Transporter" in the stop is ON, it should start the conveyor by OFF.
How should the two inputs S1 and S5 be configured for the Run forward and "Transporter" signals.
https://disk.yandex.ru/i/S_tzHZ79ZMa_rw
YASKAWA Configuration
привода и частотники
Return to “Drivers and Inverters”
Jump to
- International User Forum
- ↳ SIMATIC Automation
- ↳ SIMATIC system
- ↳ Utilites for Simatic PLC
- ↳ Siemens SIMATIC HMI
- ↳ SIMATIC HMI
- ↳ Utilites For simatic HMI
- ↳ OMRON
- ↳ OMRON PLC & HMI
- ↳ Utilites
- ↳ Allen-Bradley
- ↳ Allen-Bradley (Rockwell Automation)
- ↳ Utilites
- ↳ other PLC
- ↳ Other PLC
- ↳ Utilites
- ↳ Other HMI
- ↳ Other HMI
- ↳ Utilites
- ↳ Drivers and Inverters
- ↳ Sensors
- ↳ Industrial network
- ↳ samples
- ↳ Siemens Hardware & Software
- ↳ PLC`s Videos/Audios/Books & Over Manuals
- ↳ PLC's video
- ↳ PLC's books
- ↳ Other Books
- Russian User Forum in Russian
- ↳ Simatic (Russian)
- ↳ Simatic HMI (Russian)
- ↳ Other PLC and HMI (Russian)
- The Near-PLC Themes
- ↳ About forum , files exchangers and RULES
- ↳ Other (only about CAD and Soft)
- ↳ JOB