[?]: not connecting to ABB ACS550

привода и частотники
Post Reply
rajeshputta
Posts: 4
Joined: Tue Oct 08, 2013 7:47 am

[?]: not connecting to ABB ACS550

Post by rajeshputta » Wed Oct 09, 2013 1:40 pm

while connecting through PC to OPCA-02 cable to ABB ACS550 drive, it shows error CRC.
help me how to over come this problem
iam using to connect the drive DWL2.6

help

rajesh.putta

xwindows2000
Posts: 7
Joined: Tue Oct 08, 2013 6:01 am

Re: [?]: not connecting to ABB ACS550

Post by xwindows2000 » Thu Oct 10, 2013 3:35 am

I want software for AC500. Can you upload.

Regards,

Linkinx64
Posts: 894
Joined: Sun Apr 11, 2010 3:00 am
Location: Russia

Re: [?]: not connecting to ABB ACS550

Post by Linkinx64 » Thu Oct 10, 2013 7:31 am


rajeshputta
Posts: 4
Joined: Tue Oct 08, 2013 7:47 am

Re: [?]: not connecting to ABB ACS550

Post by rajeshputta » Thu Oct 10, 2013 7:58 am

This soft ware is get from the forum, you can type on search box:OPCA-2, you will get links.
for for ACS550 you can use DriveWindow Light software.

see the link: Link_is_Dead :(/A ... w_v2.2.rar

rajesh

MEFinc
Posts: 51
Joined: Thu Dec 08, 2011 11:23 am

Re: [?]: not connecting to ABB ACS550

Post by MEFinc » Thu Oct 10, 2013 2:59 pm

rajeshputta wrote:while connecting through PC to OPCA-02 cable to ABB ACS550 drive, it shows error CRC.
help me how to over come this problem
iam using to connect the drive DWL2.6
help
rajesh.putta
Check the parameters of your COM-port and drive.
Image

rajeshputta
Posts: 4
Joined: Tue Oct 08, 2013 7:47 am

Re: [?]: not connecting to ABB ACS550

Post by rajeshputta » Fri Oct 11, 2013 6:16 am

means we need to set PC COM port:27 & Drive COM setting port:27?
earlier post that time iam tested PC com Port:2 & Drive COM port:02.CRC error is shown.

regards
rajesh.p

MEFinc
Posts: 51
Joined: Thu Dec 08, 2011 11:23 am

Re: [?]: not connecting to ABB ACS550

Post by MEFinc » Fri Oct 11, 2013 8:09 am

You can use port number two or anyone else, it doesn't matter.
Show the parameters of your COM-ports. And screenshot of the error.

rajeshputta
Posts: 4
Joined: Tue Oct 08, 2013 7:47 am

Re: [?]: not connecting to ABB ACS550

Post by rajeshputta » Tue Oct 15, 2013 12:33 pm

MEFinc wrote:You can use port number two or anyone else, it doesn't matter.
Show the parameters of your COM-ports. And screenshot of the error.
Dear sir,

sorry for my late reply,

here i can't able to upload my screen shots,
so am writing by words an error body of message:
X---------------------------------------------------------------------------X
Error occurred while identifying drive:
Following communication error while identifying drive:CRC error.
Could not identify drive.check the connections and communication settings.

X-----------------------------------------------------------------------------X

regards,
rajesh

MEFinc
Posts: 51
Joined: Thu Dec 08, 2011 11:23 am

Re: [?]: not connecting to ABB ACS550

Post by MEFinc » Tue Oct 15, 2013 6:22 pm

Hmm, so poor information.
Ok, that may be problem like with communication settings (you set not correct value of com-port, use usb3.0 and ect.) or with software of your computer or sofware of drive...
For first, check this (from page #8.2): DriveWindow Light 2.93 User Guide

Post Reply