Page 1 of 1
Request: Eurotherm/Parker DSD
Posted: Wed Oct 21, 2009 2:19 am
by mapl
Does anyone have link to Eurotherm/Parker DSD - (Drives System Designer Software)
I have a Eurotherm Link system that will not transfer the drive setup to a new 690 drive.
I need to tell the Link system to update the configration in the drive.
Thanks
Re: Request: Eurotherm/Parker DSD
Posted: Fri Oct 23, 2009 5:39 pm
by Julio Cesar
Hi.
You can download DSD Lite from
http://www.ssddrives.com/usa/doc/Main%20Software.php
You must be a user registered. Don´t worry is free.
Best Regards
Re: [LINK]: Eurotherm/Parker DSD
Posted: Sat Oct 24, 2009 6:25 am
by mapl
Thanks Julio,
The free download is DSE, I use this for drive configuration but it does not allow access to the SSD Link communication module
Re: Request: Eurotherm/Parker DSD
Posted: Fri Nov 27, 2009 9:48 am
by krcedinac
Here is a link for you:
Link_is_Dead :(/DSD.Link_is_Dead :(
This file is neither allocated to a Premium Account, or a Collector's Account, and can therefore only be downloaded 10 times.
This limit is reached.
Re: Request: Eurotherm/Parker DSD
Posted: Tue Jan 04, 2011 8:40 am
by erwinwxy
The link is no longer active...
Please if someone still have the file, urgently need...
Anyone....
Re: Request: Eurotherm/Parker DSD
Posted: Tue Jul 05, 2011 11:45 pm
by DriverFirst
Can anybody help to find "Eurotherm/Parker DSD".
I have to backup 620Link settings, but I havn't needed software...
Please, help.
Re: Request: Eurotherm/Parker DSD
Posted: Wed Jul 06, 2011 8:31 am
by igor-drive
Who has "Eurotherm/Parker DSD".
Please!!!!!!!!!!!
Re: Request: Eurotherm/Parker DSD
Posted: Mon Sep 05, 2011 12:36 pm
by Alesandrio
Hi!
What's the problem?
Download the configuration program 690 drive?
Use the program ConfigEd Lite 6.10
link to the website where you download given above.
Привет!
В чём проблема?
Загрузить программу конфигурирования в 690 драйв?
Для этого используйте программу ConfigEd Lite 6.10
ссылку на сайт где скачать вам давали выше.
Re: Request: Eurotherm/Parker DSD
Posted: Sat Sep 10, 2011 12:06 am
by igor-drive
ConfigEd Lite 6.10 не поддерживает те функциональные блоки в 620-ых приводах, которые мне нужны. В частости "Diameter Calculator". Поэтому ищу DSD. Хотя я так понял, "кто не успел, тот опоздал"
Re: Request: Eurotherm/Parker DSD
Posted: Sat Jan 12, 2013 10:31 pm
by mohdabshr
HELLO
igor-drive if you find parker DSD software please share.
Re: Request: Eurotherm/Parker DSD
Posted: Mon Nov 21, 2016 7:31 am
by demicv
Hi , I wonder if anyone has this parker DSD software.
necessarily need to set five 620L and it is impossible to access the links.
I tried with all lite versions but it is impossible. please help me
and then,i have a problem with an message error "self test halted by co-pro"
I have 5 inverters with the same crash. Because of defective switching power supply and due to the fact that they remained too long in this state ,i believe that something is happened. Now the switching power supplies are ok .. I was able to change the defective capacitors and everything is fine but the link project is lost .. I think
Re: Request: Eurotherm/Parker DSD
Posted: Tue Nov 22, 2016 7:05 am
by demicv
please ... please .. someone needs to know
Re: Request: Eurotherm/Parker DSD
Posted: Wed Dec 07, 2016 12:18 pm
by demicv
please
Re: Request: Eurotherm/Parker DSD
Posted: Wed Nov 25, 2020 9:41 am
by slavasz
Anybody with DSD?