Request: soft for CTC Parker PS10 touch panel

Прочие SCADA: iFix, InTouch, Citect, ...
Post Reply
krcedinac
Posts: 53
Joined: Tue Apr 04, 2006 7:08 am
Location: Serbia

Request: soft for CTC Parker PS10 touch panel

Post by krcedinac » Mon Aug 11, 2008 9:25 am

Hello to all,

I have problems with CTC Parker PS10 touch panel.
The software that is used for its config is MachineShop wich is part of InteractX programing package.
Does anybody has this software to upload and/or expirience with this panels?
It is conected to G&L motion controler.
Does anybody know wich type of HMI can be also used for G&L?

Thanks in advance

Alexsan
Posts: 15
Joined: Fri Jul 13, 2007 3:32 am
Location: Mexico

InteractX software

Post by Alexsan » Tue Aug 12, 2008 2:00 am

Hello.

I have this software (2 CD), but no crack, because I have the LPT Key Dongle.

I have used this in demo mode, with 30 minutes working full.

It´s OK for you?

Regards

krcedinac
Posts: 53
Joined: Tue Apr 04, 2006 7:08 am
Location: Serbia

Post by krcedinac » Tue Aug 12, 2008 6:20 am

Hola compadre,

It is good enough. I will use it with Virtual PC that can control serial port.In that way you can use it many times, of course always with new virtual machine.

Saludos

Schtiel
Site Admin
Posts: 1100
Joined: Wed Sep 06, 2006 12:03 pm
Location: CIS

Re: InteractX software

Post by Schtiel » Tue Aug 12, 2008 12:02 pm

Alexsan wrote:I have the LPT Key Dongle.
You can dump your key and make an emulator.

Alexsan
Posts: 15
Joined: Fri Jul 13, 2007 3:32 am
Location: Mexico

InteractX Software.

Post by Alexsan » Mon Aug 18, 2008 1:56 am

Hello.

There is the link for parker MachineShop CD1:

http://rapidshare.com/files/138116435/MSuite.rar

If you need the 2nd CD (MachineLogic I/O driver config.), let me know.

Regards.

enrique_gf
Posts: 38
Joined: Fri May 02, 2008 4:41 am
Location: Mexico

Post by enrique_gf » Mon Aug 18, 2008 3:32 am

Do you need the original dongle to emulate one? Where can i find a tutorial on how to use the emulator?
Thx.

Post Reply