[?]: Where cheap operator panels?

Прочие SCADA: iFix, InTouch, Citect, ...
Post Reply
sahkari
Posts: 10
Joined: Fri Mar 28, 2008 5:29 pm
Location: Europe

[?]: Where cheap operator panels?

Post by sahkari » Sun Mar 30, 2008 5:04 pm

Where internet i find cheap siemens s7 compatible operator panels?

Schtiel
Site Admin
Posts: 1100
Joined: Wed Sep 06, 2006 12:03 pm
Location: CIS

Post by Schtiel » Sun Mar 30, 2008 5:51 pm

Try HMI panels from Weintek (http://www.weintek.com).
EasyBuilder is the software for Weintek panels.
As for me, EasyBuilder is not very user friendly. You can try it, it's free (size is about 10 Mb):
http://weintekc.ipower.com/ftp/MT500/En ... 070911.zip
They are rather cheap and support Siemens PLC.

indian
Posts: 107
Joined: Fri Aug 11, 2006 6:16 pm
Location: Russia, Komi

Post by indian » Sun Mar 30, 2008 7:02 pm

Some times ago the cheapest panels were QuickDesigner (TotalControl) panels. About $350.
Weintek's panels are much more expensive. Weintek panels are WinCE based with reach functionality.
They couldn't be one of the cheapest.

Recently I was looking for cheap panel too.
I found out this:

C-more, EZ-touch, Red Lion

Please, if anyone has an experience with listed share here.

sahkari
Posts: 10
Joined: Fri Mar 28, 2008 5:29 pm
Location: Europe

Post by sahkari » Mon Mar 31, 2008 2:55 pm

I order Weintek 506 panel:

http://www.weintek.com/global/LINK/MT50 ... fault.aspx

And price 282 e + chipping some 25 euros

enrique_gf
Posts: 38
Joined: Fri May 02, 2008 4:41 am
Location: Mexico

Post by enrique_gf » Fri May 02, 2008 5:09 am

i have heard that KEP HMI are cheap and compatible with most PLC but i really dont know www.kep.com

Nedjeljko
Posts: 111
Joined: Mon Nov 05, 2007 10:59 pm
Location: Croatia

Post by Nedjeljko » Mon May 05, 2008 11:11 am

...yes you have right...is litle bit harder than I though...

... http://easyview.com.tw/eng/easybuilder.asp ...here is some descritpion of functions
Last edited by Nedjeljko on Mon May 05, 2008 11:42 am, edited 1 time in total.

Nedjeljko
Posts: 111
Joined: Mon Nov 05, 2007 10:59 pm
Location: Croatia

Post by Nedjeljko » Mon May 05, 2008 11:31 am

EasyView Touch Panel Computer

EasyView Windows CE touch panel computer

The MT-6xx Windows CE touch panel computers are designed to fill the gap between
traditional HMI products and full blown industrial PCs, typically offering increased functionality
and flexibility over traditional HMIs at lower cost than industrial PCs.

The MT-608T offers an 8" TFT color display and includes all the necessary functions
needed by a modern touch screen panel. It includes 3 USB ports, 1 Ethernet 10/100 port and
3 serial ports supporting the most used standards. It is also equipped with a CF socket
expansion, in order to add optional adapters such as Bluetooth or Wi-Fi.

Features:

8" TFT color display (64K colors)
Resolution: 640 x 480 pixels
Brightness: 400 cd/m²
Analog resistive touch screen
Cirrus Loguc EP9315 200MHz ARM920T processor
64MB DRAM / 32MB Flash memory
CompactFlash card slot
44-pin IDE interface
3 Serial ports (1 x RS232, 2 x RS232/485)
1 Ethernet port (10/100Base-T)
3 USB 2.0 full-speed host
20 Bit stereo sound output
Real Time Clock
Windows CE.net 5.0


...price 645€...is this good price?!?...or someone has cheaper...this is one company from nederland "PLC Direct Benelux"

Schtiel
Site Admin
Posts: 1100
Joined: Wed Sep 06, 2006 12:03 pm
Location: CIS

Post by Schtiel » Wed May 07, 2008 8:20 am

indian wrote:Some times ago the cheapest panels were QuickDesigner (TotalControl) panels. About $350.
Can they be ordered now? Who is their distributor in CIS?

Nedjeljko
Posts: 111
Joined: Mon Nov 05, 2007 10:59 pm
Location: Croatia

Post by Nedjeljko » Wed May 07, 2008 10:11 am

is this CTC panels compatibile with siemens..?!?!


Distributors for QuickDesigner
EUROPE:
Inmoco, Gerard Bush, 4 Brunel Close, Drayton Fields, Daventree, NORTHANTS, NN115RB, United Kingdom: (Phone:) 011-441-327300320; (Fax:) 011-441-327300319

Region Covered: Malaysia

Excel Precision Sdn Bhd (System Integrator),
K. K. Lai, 2619, MK 1, Lorong Perusahaan 8D, Kawasan Perusahan 2, Prai Industrial Estate, 13600 Prai, Penang, Malaysia; (Email:) kklai@excel.com.my (Phone:) (6)04-399 3629 (Ext 121); (Fax:) (6)04-398 0329

Region Covered: Malaysia,Singapore & Vietnam

I-Motion Pte Ltd.,
Blk 5 Ang Mo Kio Ind Park 2A, #02-29, Singapore 567760 ; (Email:) ivan@imotionasia.com
(Phone:) (65) 6483 5141; (Fax:) (65) 6280 3655

indian
Posts: 107
Joined: Fri Aug 11, 2006 6:16 pm
Location: Russia, Komi

Post by indian » Thu May 08, 2008 4:20 am

Schtiel wrote:Can they be ordered now? Who is their distributor in CIS?
They are discontinued products. You can use QuickPanel View family instead. Migration of applications developed with QuickDesigner is supported.

But the upgrade is very costly.

Nedjeljko
Posts: 111
Joined: Mon Nov 05, 2007 10:59 pm
Location: Croatia

Post by Nedjeljko » Sun May 18, 2008 3:51 pm

I just wonering...is it maybe possible to make upload Image of WinnCC flex to this panel EasyView...I mean panels from siemens and EasyView use same operating system Windows CE and if we upload new image file into it, I think we can do visualisation with winCC flex..

Anyone know this...please someone to answer!?

Post Reply