GPPROeX 4.09.120 - How to add GC4000 Panels to It ?

Прочие SCADA: iFix, InTouch, Citect, ...
Post Reply
macedoethomas
Posts: 5
Joined: Mon Aug 09, 2010 7:35 pm
Location: Sao Paulo - Brazil

GPPROeX 4.09.120 - How to add GC4000 Panels to It ?

Post by macedoethomas » Tue Nov 17, 2020 2:35 am

Dear Colleagues,

I do have GPPRO-EX version 4.09.120 installed in my notebook, but I received a backup file from a costumer and when trying to open it
the message "unable to load project as it is confiured with a display unit that is not supported by the editor. Please define a different file".

I found some instructions about this message on Proface web site:
https://www.pro-face.com/otasuke/files/ ... errors.htm

But the question is how I do add GC4000 series panel to GPPRO-EX 4.09.120 when they are not listted in?

Regards,
MTE

macedoethomas
Posts: 5
Joined: Mon Aug 09, 2010 7:35 pm
Location: Sao Paulo - Brazil

Re: GPPROeX 4.09.120 - How to add GC4000 Panels to It ?

Post by macedoethomas » Tue Nov 17, 2020 9:59 am

Dear Colleagues,
I just could open the GP panel model following the instructions from Proface website that are in:

https://faq.hmisource.com/s/article/how ... -gp-pro-ex

Regards,
MTE

Post Reply