[?+] HMIGXO in Vijeo designer 6.2

Прочие SCADA: iFix, InTouch, Citect, ...
Post Reply
omar zedan
Posts: 236
Joined: Sat Oct 22, 2011 7:12 am

[?+] HMIGXO in Vijeo designer 6.2

Post by omar zedan » Mon Jan 05, 2015 12:23 pm

Dear All
I install Vijeo designer 6.2 software but when I try to use HMIGXO3502 Magelis hmi touch screen I did not find it in the software when I create new product what can I do to solve this problem???
Thanks

Schtiel
Site Admin
Posts: 1121
Joined: Wed Sep 06, 2006 12:03 pm
Location: CIS

Which version of Vijeo Designer I can configure HMIGXO panel

Post by Schtiel » Tue Jan 06, 2015 7:32 am

The minimum Version of Vijeo Designer to use GXO HMI is Vijeo Designer 6.0 SP2. If you have the licensed version of Vijeo Designer V6.0 SP2, then you are able to add the GXO series of HMI in the software.

Upgrading the software is free of cost.

For this follow the procedure below:

1. In Vijeo Designer, click on the Help menu, then click on About.
2. In the dialog window, select the Licence tab, then click on the Upgrade button.
3. You may then put the upgrade reference number as VJDHTGTGX and press upgrade.

After that you are able to view the GXO Series panels in your Vijeo Designer project configurations.

omar zedan
Posts: 236
Joined: Sat Oct 22, 2011 7:12 am

Re: [?+] HMIGXO in Vijeo designer 6.2

Post by omar zedan » Tue Jan 06, 2015 1:30 pm

thamk you so much

Waqas_Khan
Posts: 20
Joined: Wed Jul 02, 2014 7:35 am

Re: [?+] HMIGXO in Vijeo designer 6.2

Post by Waqas_Khan » Wed Jan 07, 2015 11:42 am

Dear Schtiel/Omar Zedan,

Does anyone have downloadable link for Vijeo Designer 6.0 and 6.1?

Schtiel
Site Admin
Posts: 1121
Joined: Wed Sep 06, 2006 12:03 pm
Location: CIS

Re: [?+] HMIGXO in Vijeo designer 6.2

Post by Schtiel » Wed Jan 07, 2015 8:03 pm


krank
Posts: 86
Joined: Tue Aug 21, 2012 1:51 pm
Location: Europe

Re: Which version of Vijeo Designer I can configure HMIGXO p

Post by krank » Fri Jan 09, 2015 6:08 pm

it's good !

works well

omar zedan
Posts: 236
Joined: Sat Oct 22, 2011 7:12 am

Re: [?+] HMIGXO in Vijeo designer 6.2

Post by omar zedan » Fri Jan 16, 2015 1:16 pm

Thank you so much

HardWorker
Posts: 1
Joined: Thu Jan 29, 2015 7:02 am

Re: [?+] HMIGXO in Vijeo designer 6.2

Post by HardWorker » Thu Jan 29, 2015 7:19 am

Hello!
First of all, thank you for your post, it worked just fine, in the first attempt. I used this information
for Vojeo Designer 6.1. (thnx) But, nowdays, I have to work with SoMachine 4.1 and Vijeo 6.2 (6.1 still installed
on my PC), and I did the same, but GXO family does not appears as selectable in SoMachine. Any kind of
help will be apreciated, but most of all, a link for a programming guide (else language than chinese :lol: )
for this GXO family, will save me from further problems. (sos)

Post Reply