Project from the Pro-Face GP 2301 download to Pro-Face GP 577R

Прочие SCADA: iFix, InTouch, Citect, ...
Post Reply
slong
Posts: 17
Joined: Wed Feb 16, 2011 10:30 pm

Project from the Pro-Face GP 2301 download to Pro-Face GP 577R

Post by slong » Thu Nov 28, 2019 8:47 am

Hello!
We have a pro-face gp 2301 operator panel.
As well as the operator panel pro-face gp 577R.
Image
The pro-face gp 2301 operator panel connects to the PLC modicon tsx micro controller via serial interface (com1).

The pro-face gp 577R operator panel also has a serial interface SIO connector.
Image
I unload the program from the pro-face gp 2301 operator panel using GP-PROPB III for Windows.
Unloading go without problems.
Image
I download the uploaded project from the pro-face gp 2301 operator panel to the pro-face gp 577R operator panel using GP-PROPB III for Windows.
The project also loads without errors, in the process I change the type of panel to pro-face gp 577R.

A visualization appears, but there is no communication with the controller.
A message appears at the bottom of the screen:
Image
Question:
Is there any way to start a project without communication errors?
Please help solve this problem.

Post Reply