PLCforum.uz.ua

Hi, if some one made Modicon M241 connection with weintek MT8102 iE?
I did what manual of Weintek sey.
Is there special setings in Somachine progect of M241?
Thanks

The problem is solved.
Just chenge of IP addres end subnet mask
Old one was PLC IP :10.10.9.100 SM: 255.0.0.0
HMI IP: 10.10.9.101 SM: 255.0.0.0

New on PLC IP: 192.168.5.10 SM: 255.255.255.0
HMI IP: 192.168.5.11 SM: 255.255.255.0
End connection is ok now.