Help with weintek MT8071iE program

Прочие SCADA: iFix, InTouch, Citect, ...
Post Reply
rualcosi
Posts: 25
Joined: Sat Aug 30, 2008 9:37 pm
Location: Europe

Help with weintek MT8071iE program

Post by rualcosi » Sat Mar 02, 2024 5:55 am

I need help to understand how communication with frequency inverters works in this example, as I need to add two more and I don't understand how they communicate with inverters.
I leave a copy of the HMI program so you can see it and who knows, maybe give some tips on how this was done so that I understand how I should add the two variators.
Thank you very much in advance for any and all possible help.

https://drive.google.com/drive/folders/ ... sp=sharing

shaban
Posts: 22
Joined: Mon Jul 02, 2012 7:47 pm

Re: Help with weintek MT8071iE program

Post by shaban » Wed Mar 06, 2024 6:58 am

I need help to understand how communication with frequency inverters works in this example, as I need to add two more and I don't understand how they communicate with inverters.
I leave a copy of the HMI program so you can see it and who knows, maybe give some tips on how this was done so that I understand how I should add the two variators.
Thank you very much in advance for any and all possible help.

To help you, you need to see the PLC program.

https://i.postimg.cc/ZnMgBdcr/1.jpg

Post Reply