Page 1 of 2

XOB file password

Posted: Tue May 06, 2014 4:48 pm
by raxonyo
Hi,
i have a problem, i get project from my hmi. Project is in .xob format. I try to decompile this project to .mtp format using EasyBuilder8000 -> Tool -> Decompile, but i dont have password (default password - 111111 is not correct ). Mayby sombody know possibility to restore password from .xob file ?

Re: XOB file password

Posted: Thu May 08, 2014 6:44 am
by vlad2006gr
Send me a project *. Xob format, I decompiled the project and send you.

Re: XOB file password

Posted: Thu Aug 21, 2014 1:22 am
by baduynamduoc
I give file project*.pkg format. You can decomplie the project and send me :
baduynamduoc@gmail.com.
Help me. Thanks.
Link file : http://www.data.webdien.com/free/dow...90be216facc2c8

Re: XOB file password

Posted: Mon Aug 25, 2014 6:11 pm
by vlad2006gr
file project*.pkg format- This file format program eView- EV5000 from Kinco
See http://www.kinco.cn/html/en/NewsCenter/ ... 28473.html
The format differs from Weintek.

Re: XOB file password

Posted: Mon Aug 25, 2014 6:31 pm
by vlad2006gr
baduynamduoc quote:
The file is corrupt and can not be decompiled.

Weintek HMI xob file password

Posted: Tue May 24, 2016 9:30 am
by gycu
Hello guys,

I have a Weintek MT8121X. I got a xob file from it but when tried to decompile, it asks for password. I tried the default 111111 but did not work. I searched the related topics but could not find anything useful.

Please help me find the password.

Thank you very much in advance.

PS: If needed, I can upload the file.

Posted: Mon May 30, 2016 7:07 pm
by Schtiel

Re: Weintek HMI xob file password

Posted: Tue May 31, 2016 12:22 pm
by gycu
Thanks for the suggestion, Schtiel, but I read that topic (and others) already. Unfortunately, I don't have the*.mtp file, I only have the compiled version (*.xob) which needs to be decompiled first. In order to do this, it asks for password. I downloaded the file from HMI to a USB stick.

Any help would be much appreciated.

LE: This is how I should decompile if I had the password

Code: Select all

http://www.imenista.com/MT8000%20HMI%20FAQ/FAQ_09_How_to_Decompile_the_xob_file_which_uploading_in_the_USB_Disk.pdf
LLE: It could also have the "Decompilation is prohibited" checked though but I'm hoping it wasn't :)

Re: Weintek HMI xob file password

Posted: Tue May 31, 2016 1:51 pm
by vlad2006gr
Poor reading. Again read carefully. Do you have a file *.xob? He needed to get the decompiled file.
Put the file *.xob on a file exchanger.

Re: Weintek HMI xob file password

Posted: Tue May 31, 2016 5:41 pm
by gycu
Maybe I missed something or I didn't get it.

I sent you a pm.

Thank you, sir!

Re: Weintek HMI xob file password

Posted: Wed Jun 01, 2016 4:46 am
by vlad2006gr
gycu wrote:Maybe I missed something or I didn't get it.
See PM.

Re: Weintek HMI xob file password

Posted: Thu Jun 02, 2016 6:13 am
by gycu
Received it, thank you so much, Vlad, although I have no idea how you did it, you've been a life savior!!! (tyou)

cheers

Re: XOB file password

Posted: Mon Jun 13, 2016 5:52 am
by pmpatel34
Hi,
i have a same problem, i get project from my hmi. Project is in .xob format. I try to decompile this project to .mtp format using EasyBuilder8000 -> Tool -> Decompile, but i dont have password (default password - 111111 is not correct ). Mayby sombody know possibility to restore password from .xob file ?

help

Re: Weintek HMI xob file password

Posted: Fri Jun 17, 2016 1:24 pm
by fractal
I have same problem.I codnt xob password using hex editor program for decompile.
can you help me to decompile ?
or how can crack xob password?
I have usb backup hmi program.
it has xob password.
so I codunt decompile...

this situation what can I do?..
thans a lot..

Re: Weintek HMI xob file password

Posted: Fri Jun 17, 2016 8:36 pm
by vlad2006gr
Download the project (*.xob) to any file sharing, and a link to the forum or pm.

Re: XOB file password

Posted: Tue Jun 21, 2016 6:08 pm
by unlockplc
You can go here: http://unlockplc.com/crack-plc-hmi/
Or send the XOB file to me: unlockplc123@gmail.com

Weintek HMI XOB password

Posted: Mon Aug 22, 2016 8:37 pm
by decathlete
Hi.
I downloaded the .xob file from HMI. But file is protected and i can't decompile it.
I open the file in HEX editor but don't find nothing.
In older posts links is dead.
Help me please. :wink:

Weintek HMI .xob file password

Posted: Sat Jan 14, 2017 6:52 am
by chessbana
Hello guys,

I have a Weintek MT6070iH. I uploaded a .xob file from it using EB8000 v4.66 with default password 111111 successfully, but when i tried to decompile, the same password did not work.

Can anyone help me find to find the password or convert it to .mtp file for me?

The .xob file can be uploaded from the following link:

https://files.fm/u/pbt6skt9#_

Appreciate all the help i can get, thanks very much.

Re: Weintek HMI .xob file password

Posted: Mon Jan 16, 2017 8:49 am
by vlad2006gr
chessbana wrote:but when i tried to decompile, the same password did not work.

Can anyone help me find to find the password or convert it to .mtp file for me?
Take away
https://www.sendspace.com/file/caorhk
Good luck!

Re: Weintek HMI .xob file password

Posted: Wed Jan 18, 2017 7:01 am
by chessbana
(pgood) (pgood) Thanks alot vlad2006gr!!! Can share your method if you don't mind?

Re: Weintek HMI .xob file password

Posted: Mon Apr 10, 2017 10:53 am
by khianon
Hi,
I have same as problem, can,t convert from xob to mtp file.
Can help Me ?

link file:
https://www.dropbox.com/s/y5i2306miuwio ... a.xob?dl=0

Thks
Rgds
Heryanto

Re: Weintek HMI .xob file password

Posted: Mon Apr 10, 2017 8:31 pm
by vlad2006gr

Re: Weintek HMI .xob file password

Posted: Wed Apr 12, 2017 3:42 am
by Panda Gendut
Dear Vlad,

Can you also help me to convert to *.mtp ?
https://www.dropbox.com/s/3ss8y9q48nmc6 ... 1.xob?dl=0

Thanks.

Re: Weintek HMI .xob file password

Posted: Wed Apr 12, 2017 1:32 pm
by vlad2006gr
Panda Gendut wrote:Can you also help me to convert to *.mtp ?
http://dropmefiles.com/8tGME
Good luck!

Re: Weintek HMI .xob file password

Posted: Wed Apr 12, 2017 4:10 pm
by Panda Gendut
thank you so much

Re: Weintek HMI .xob file password

Posted: Wed Apr 26, 2017 4:26 am
by khianon
Dear Sir,
thanks very much


Rgds
Heryanto

Re: Weintek HMI .xob file password

Posted: Tue Jun 06, 2017 2:55 am
by khianon
Dear Vlad,
Could help me convert file below to weintek mtp file?
https://www.dropbox.com/s/behga8j7klmfz ... a.xob?dl=0

Rgds
Heryanto

Re: Weintek HMI .xob file password

Posted: Tue Jun 06, 2017 4:35 am
by vlad2006gr
khianon wrote:Could help me convert file below to weintek mtp file?
https://www.sendspace.com/file/fgohzr
Good luck!

Re: Weintek HMI .xob file password

Posted: Mon Jun 12, 2017 5:33 am
by khianon
Dear Vlad,
Many thanks.

Rgds
Heryanto

Re: Weintek HMI .xob file password

Posted: Wed Nov 08, 2017 6:15 pm
by douyi
Dear vlad,

Do you mind convert the xob file to mtp for me as well? Thanks a lot!

Regards,

douyi

https://www.mediafire.com/file/6rra62w5 ... T6100i.xob

Re: Weintek HMI .xob file password

Posted: Thu Nov 09, 2017 10:07 am
by vlad2006gr
douyi wrote:Do you mind convert the xob file to mtp for me as well? Thanks a lot!
No file....

Re: Weintek HMI .xob file password

Posted: Fri Dec 15, 2017 8:29 am
by ccoa
Could you decompile this file please.

http://www.mediafire.com/file/8f1gazqg19rs1s5/HMI.xob

Re: Weintek HMI .xob file password

Posted: Mon Dec 18, 2017 7:20 am
by aoyon7
Dear Vlad,
Kindly need your help to decompile the .xob file to mtp? Thanks in advance!

File: https://drive.google.com/file/d/10GHThh ... eK7vB/view

Regards,

Aoyon

Re: Weintek HMI .xob file password

Posted: Wed Apr 11, 2018 12:25 am
by toms5758
Dear Vlad,
Could you please decompile this xob files,
https://drive.google.com/open?id=19vhS3 ... ycmv3uUukv

Regards,

Tony

Re: Weintek HMI .xob file password

Posted: Wed Apr 11, 2018 7:21 pm
by vlad2006gr
toms5758 wrote:Could you please decompile this xob files
see PM

Re: Weintek HMI .xob file password

Posted: Sat Apr 06, 2019 12:09 pm
by INGELM
Hello,

I performed a back up to a HMI WEINTEK MT6050i, but now I need to decompile de .xob file, I tried with default password 111111 and doesn't work, can you guys help me to find the password?


Thank you in advance

XOB file: https://drive.google.com/open?id=1jkr8d ... Vim42hQzvQ

Re: Weintek HMI .xob file password

Posted: Sun Apr 07, 2019 8:22 am
by vlad2006gr
INGELM wrote:
Sat Apr 06, 2019 12:09 pm
I performed a back up to a HMI WEINTEK MT6050i, but now I need to decompile de .xob file
See PM

Re: Weintek HMI .xob file password

Posted: Mon May 13, 2019 11:47 am
by arunmp11
Hello guys,

I have a Weintek tk6070iH. I uploaded a .xob file from it using EB8000 v4.65 with default password 111111 successfully, but when i tried to decompile, the same password did not work.

Can anyone help me find to find the password or convert it

https://drive.google.com/file/d/1VhMzVc ... sp=sharing

Re: Weintek HMI .xob file password

Posted: Mon May 13, 2019 2:49 pm
by ziconltai
Hi arunmp11!
Is that a DONGGUAN C-WIN AUTOMATION EQUIPMENT Co,.LTD?

Re: Weintek HMI .xob file password

Posted: Tue May 14, 2019 3:31 am
by arunmp11
Dear sir,

You are absolutely correct. Please send me the password or mtp file for that.



thanking you,
Arun

Re: Weintek HMI .xob file password

Posted: Sat May 18, 2019 7:26 am
by arunmp11
any one can help

Re: Weintek HMI .xob file password

Posted: Sun May 19, 2019 10:09 am
by arunmp11
actual the file was prohibited for decompiling.

any one can do it

Re: Weintek HMI .xob file password

Posted: Sun May 19, 2019 3:22 pm
by Paul7
Hello
I have a Weintek MT510TV HMI and when trying to upload it, I was requested a password.
I tried the default password "0" (without the ") and the it did not work.
The PLC was also password protected, yet this number was available. I tried this number on the HMI and it did not work.

Is there a way how to find it?
rgds
Paul

Re: Weintek HMI .xob file password

Posted: Wed May 22, 2019 5:28 am
by vlad2006gr
Paul7 wrote:
Sun May 19, 2019 3:22 pm
I tried the default password "0" (without the ") and the it did not work.
default password 111111

Re: Weintek HMI .xob file password

Posted: Sat May 25, 2019 8:13 am
by arunmp11
please help me

Re: Weintek HMI .xob file password

Posted: Sat May 25, 2019 9:48 pm
by Niconora
Hi
You can´t recover this project, as you said this have unable to decompile.
by the way, if vlad2006gr can´t help you, then forge it.

Re: Weintek HMI .xob file password

Posted: Sun May 26, 2019 10:56 am
by arunmp11
you are correct (h)

and the god will help me sure :cry:

Re: Weintek HMI .xob file password

Posted: Tue May 28, 2019 1:46 pm
by ziconltai
Paul7 wrote:
Sun May 19, 2019 3:22 pm
Hello
I have a Weintek MT510TV HMI and when trying to upload it, I was requested a password.
I tried the default password "0" (without the ") and the it did not work.
The PLC was also password protected, yet this number was available. I tried this number on the HMI and it did not work.

Is there a way how to find it?
rgds
Paul
See this Video please
https://www.youtube.com/watch?v=HskX9Pitlhw&t=82s

Re: Weintek HMI .xob file password

Posted: Thu Jun 20, 2019 6:04 am
by arunmp11
all file was cracked :haha:

Re: Weintek HMI .xob file password

Posted: Tue Jul 09, 2019 4:04 am
by duong23199922
heloo. i have file program used upload from hmi mt6070ih. i want to open it to view screes and edit, but i not open it. plese help me. thank you.
https://drive.google.com/open?id=14r8_A ... DLkjO1HzPG.