OMRON CJ1M and ESA IT112T HMI communication very slow

Прочие SCADA: iFix, InTouch, Citect, ...
Post Reply
shotgamer
Posts: 3
Joined: Tue Jan 29, 2013 1:47 pm

OMRON CJ1M and ESA IT112T HMI communication very slow

Post by shotgamer » Mon Aug 11, 2014 8:03 am

Hi!
I have one project. One PLC (OMRON CJ1M CPU13) and one HMIl ESA IT112T. But communication is very slow.
The settings:
In ESA POLYMATH HMI software:
PLC>
COM: Baudrate: 9600 bit/s
Parity: Even
Data Bit: Seven
Stop Bit: Two
Device address: 0
Network address: 0
Node number: 0
IT112T(SP1,SP2,ETH1,ETH2)
HMI>
SP1: Baudrate: 9600 bit/s
Parity: Even
Data Bit: Seven
Stop Bit: Two
CS1,CJ1,CP1 series

In PLC software (CX Programmer):
PLC Settings>
Peripheral Port - Communication Settings
Custom: -Baud: 115200
-Format: 7,2,E
Mode: Host Link

Someone help?

Thx!
shotgamer

Post Reply