[?]: How to open Proficy Machine *. varCF *. SwxCF ?

[TatarinRus]

Please help. There are two file
1061 RG250-UCS v2_2_00.varCF
1061 RG250-UCS v2_2_00.SwxCF

than you can open or convert.
there is
Proficy Machine Edition 7.0
Logicmaster 90 TCPIP

was killed already, nothing works.
in advance for your reply. Please do not kick much if anything.

[Schtiel]

Actually, .SwxCF is just a zip archive, so you can unpack it with, for example, WinRAR.

And, of course, you can import .SwxCF directly in Proficy Machine Edition.

[TatarinRus]

And, of course, you can import .SwxCF directly in Proficy Machine Edition.

archive is damaged or unknown format

does not work. Unpack anyone else. I would be very grateful.
1061 RG250-UCS v2_2_00.zip 1.47MB

[Vagabundo]

Hi, This files are backup of project, so you must open Proficy ME and File->Restore project...

[Oldman]

http://www.megaupload.com/?d=VMW5FMT0
http://www.megaupload.com/?d=RYAY9VHP

[TatarinRus]

http://www.megaupload.com/?d=VMW5FMT0
http://www.megaupload.com/?d=RYAY9VHP

Apparently I do, that is not to understand.

1.) *. SwxCF - so the file can not I open WinRAR. see screenshot above post.
That is, I saw *. SwxCF as an archive, but got -
archive is damaged or unknown format

2) 1061 RG250-UCS v2_2_00.varCF and 1061 RG250-UCS v2_2_00.SwxCF - I learned from a ZIP archive.

Now I have two files.
3) The question is - how to import *.. SwxCF in Proficy.

thanks to all who responded to my problem.

Hi, This files are backup of project, so you must open Proficy ME and File->Restore project...

> Restore project ... is not active.
chose all of the tabs in the tree.

...................... thanks to all figured out.