[?]: Wonderware Application Server Deployment Problem

[af.naderi]

Hi every body,
I work with a galaxy that contains two winplatform. one of them is server and the other one is client.
I set server settings base on my own computer and deploy it easy.
But when i confige client setting base on other computer and deploy it, WAS does not deploy it.
Could anyone help me?
Please describe me step by step.

Thanks

[Roman]

1 On client side you must install bootstrap
2 Command PING ClientName must work on server side. Not PING IpClient

[DelSnos]

Hi every body,
I work with a galaxy that contains two winplatform. one of them is server and the other one is client.
I set server settings base on my own computer and deploy it easy.
But when i confige client setting base on other computer and deploy it, WAS does not deploy it.
Could anyone help me?
Please describe me step by step.

Thanks

1. On the client computer should be installed bootstrap. (IAS component)
2. On a server and on the client computer should be created an identical account (start/prog/Wonderware/common/Change Network account/)

Rus
1. На клиентской машине должен быть установлен компонент IAS bootstrap.
2. У сервера и клиентской машины должны быть созданные одинаковые аккаунты, через утилитку Change Network account. Внимание, потребуется перезагрузка PC! (start/prog/Wonderware/common/Change Network account)