Hi Friends!!!
I already test the communication bettwen PC and InTouch 9.5 self-developed application by means DASSIDirect server.
It's work good, I wery gladly.
Now I have are CP5611 MPI/DP communication board for PC. And I want to, develop, the InTouch application for one customer.
Please, tell me, what kind of aditional software is necesseary for this purporse. I mean server for CP5611.
Thank's
[?]: InTouch 9.5 +Siemens CP5611
Re: [?]: InTouch 9.5 +Siemens CP5611
Hello Pavel,
Possible way - Configuring the S7 I/O Server for Windows NT 4.0 to Access S7-400 PLCs via the Siemens CP5611 Card ( http://fa.sammicomputer.co.kr/TECH/html/t000961.htm ) Not recommend!
Another way - Using SimaticNet Server + OPC LINK.
In Siemens site necessary setting look at http://support.automation.siemens.com/W ... n/15364951 .
For OPCLink settings, I can't to find manual. But it's not so difficult. We can discuss later, if you need.
And last one Configure DAS S7 Server in Windows® 2000/XP via CP1613 Interface over TCP Connection ( http://fa.sammicomputer.co.kr/TECH/html/t001123.htm )
This example is with other CP (Ethernet), but logic is the same for you with Profibus CP.
best regards,
Umencho
Possible way - Configuring the S7 I/O Server for Windows NT 4.0 to Access S7-400 PLCs via the Siemens CP5611 Card ( http://fa.sammicomputer.co.kr/TECH/html/t000961.htm ) Not recommend!
Another way - Using SimaticNet Server + OPC LINK.
In Siemens site necessary setting look at http://support.automation.siemens.com/W ... n/15364951 .
For OPCLink settings, I can't to find manual. But it's not so difficult. We can discuss later, if you need.
And last one Configure DAS S7 Server in Windows® 2000/XP via CP1613 Interface over TCP Connection ( http://fa.sammicomputer.co.kr/TECH/html/t001123.htm )
This example is with other CP (Ethernet), but logic is the same for you with Profibus CP.
best regards,
Umencho
Re: [?]: InTouch 9.5 +Siemens CP5611
Great Thank's You for information.
I was download the "PROFIBUS FMS 8.0" i/o serever from Wonderware web page. After instalation, the server request the CP5611 driver.
Even if my STEP7 paccage is work fine. It need the aditional setup the full driver paccage for CP5611.
Is it correct ???
With best regards.
Pavel.
I was download the "PROFIBUS FMS 8.0" i/o serever from Wonderware web page. After instalation, the server request the CP5611 driver.
Even if my STEP7 paccage is work fine. It need the aditional setup the full driver paccage for CP5611.
Is it correct ???
With best regards.
Pavel.
Re: [?]: InTouch 9.5 +Siemens CP5611
Hi all,
Could anyone can tell me where I can download the "Wonderware S7 I/O Server" ?!
I have registered an account on they web site but they don't allow me to download software.
Thanks,
Ban
Could anyone can tell me where I can download the "Wonderware S7 I/O Server" ?!
I have registered an account on they web site but they don't allow me to download software.
Thanks,
Ban