Page 1 of 1
[?]: HOW TO REMOVE SOURCE PROTECTION IN RSLOGIX5000
Posted: Fri Jan 30, 2009 10:10 am
by nene
How to Know How to Remove the Source Protection in Routines written in RSLOGIX5000
Please Post Thanks
Posted: Sun Apr 05, 2009 4:04 pm
by Rudi
There is nothing to remove. Opposite. You have to add the
source protection file and point the
source protection routine to that file. Usally the file called sk.dat. So you have to look for the this file on the original machine and then you have to know the password as well in order to remove the
source protection.
Good Luck
BR
Rudi
Posted: Sun Apr 05, 2009 5:07 pm
by LogixGuy
Rudi wrote:There is nothing to remove. Opposite. You have to add the
source protection file and point the
source protection routine to that file. Usally the file called sk.dat. So you have to look for the this file on the original machine and then you have to know the password as well in order to remove the
source protection.
Good Luck
BR
Rudi
If I had the original machine then the
source protection question wouldn't have been asked. If I knew the password I wouldn't ask the question. That's kind of obvious...
I know how to protect my routines. I want to to know (a) how protected they are and (b) if other routines that I don't know the password to can be unprotected.
The Siemens S7 routines are not too hard to find unprotection methods for. I was wondering about CLX
Posted: Mon May 11, 2009 5:23 pm
by Rudi
@LogixGuy
How I could know that you know already everything
It looks like AB did a good job in that case. I don't know how to bypass that kind of
protection neither. On the other hand, I did several jobs too with
RSLogix5000 and I don't like the idea, that others take my knowledge for nothing. May you find something interesting, than let me know
Rudi
souce protection
Posted: Tue Aug 18, 2009 6:20 pm
by nene
brave engineers who can go out almost all the harder to remove the protection of routine Logix 5k
very easy
Posted: Wed Sep 30, 2009 6:05 pm
by batuhan1234
if you sens to protected program ı can unprotect and send you back.
Re: very easy
Posted: Sun Aug 14, 2011 12:20 pm
by nsnali
batuhan1234 wrote:if you sens to protected program ı can unprotect and send you back.
Batuhan, do you mean that you can figure out what the
source code is?
Re: [?]: HOW TO REMOVE SOURCE PROTECTION IN RSLOGIX5000
Posted: Mon Aug 15, 2011 7:46 am
by brave_eagle
it's not so difficult, Pls. upload your source code
Re: [?]: HOW TO REMOVE SOURCE PROTECTION IN RSLOGIX5000
Posted: Wed Aug 17, 2011 5:43 am
by nsnali
I do not have the source code. I know how to edit sk.dat file.
Re: [?]: HOW TO REMOVE SOURCE PROTECTION IN RSLOGIX5000
Posted: Thu Aug 18, 2011 3:59 pm
by jorger1953
Brave_eagle, how can i unportect the code? If I send to you the plc configuration you can unprotect?
Thanks
Re: [?]: HOW TO REMOVE SOURCE PROTECTION IN RSLOGIX5000
Posted: Fri Aug 19, 2011 1:11 am
by brave_eagle
jorger1953 wrote:Brave_eagle, how can i unportect the code? If I send to you the plc configuration you can unprotect?
Thanks
You can upload your
source code to rapidshare or other share host then tell me the link, or you can send your code by mail
yt_support@163.com
Re: [?]: HOW TO REMOVE SOURCE PROTECTION IN RSLOGIX5000
Posted: Fri Aug 19, 2011 7:19 am
by brave_eagle
Pls. converter it to v17
Re: [?]: HOW TO REMOVE SOURCE PROTECTION IN RSLOGIX5000
Posted: Fri Aug 19, 2011 12:01 pm
by brave_eagle
Hi! deaar friend. I've done the job'
I'll send you the unprotected file by mail
Re: [?]: HOW TO REMOVE SOURCE PROTECTION IN RSLOGIX5000
Posted: Wed Jan 18, 2012 6:40 pm
by yokesh1987
please can any share how to unprotect the source protection subroutine block?
Re: [?]: HOW TO REMOVE SOURCE PROTECTION IN RSLOGIX5000
Posted: Mon Jun 25, 2012 10:36 pm
by arfineira
Any can to share the procedure how to use Olly DBG to uprotect any subroutine ?
Re: [?]: HOW TO REMOVE SOURCE PROTECTION IN RSLOGIX5000
Posted: Fri Jul 13, 2012 2:41 am
by davidsk2001
Can you share how to do it? thank you so much.
Re: [?]: HOW TO REMOVE SOURCE PROTECTION IN RSLOGIX5000
Posted: Fri Jul 27, 2012 7:42 am
by Yasir Maqsood
Dear Brave,
If you done it, then please share the procedure to unprotect the subroutine of Soure Protection.
YM
Re: [?]: HOW TO REMOVE SOURCE PROTECTION IN RSLOGIX5000
Posted: Tue Sep 25, 2012 1:51 pm
by mrs_oliveira
Hi all,
Anibody have sucess on remove source protection of Add-On instruction?? How to do this?
Thanks for any help!
Re: [?]: HOW TO REMOVE SOURCE PROTECTION IN RSLOGIX5000
Posted: Tue Nov 27, 2012 6:17 pm
by taleb_nour
Hi,
please brave_eagle can you share the procedure to remove source protection
Thanks
Re: [?]: HOW TO REMOVE SOURCE PROTECTION IN RSLOGIX5000
Posted: Sun Feb 17, 2013 6:25 pm
by TornStar
How can the source protection be cracked if you don't know the password in the original sk.dat file?
Re: [?]: HOW TO REMOVE SOURCE PROTECTION IN RSLOGIX5000
Posted: Wed Nov 23, 2022 2:37 am
by Raza
brave_eagle wrote: ↑Fri Aug 19, 2011 1:11 am
jorger1953 wrote:Brave_eagle, how can i unportect the code? If I send to you the plc configuration you can unprotect?
Thanks
You can upload your
source code to rapidshare or other share host then tell me the link, or you can send your code by mail
yt_support@163.com
Can you please check your email, i have sent you an email with a password-protected file, help me unlock it please.
Thanks,
Raza.
Re: [?]: HOW TO REMOVE SOURCE PROTECTION IN RSLOGIX5000
Posted: Tue Jan 31, 2023 8:09 am
by sqhlxdl
Re: [?]: HOW TO REMOVE SOURCE PROTECTION IN RSLOGIX5000
Posted: Mon Feb 06, 2023 7:46 pm
by georgegw
Good evening to everyone! Can anyone help me with this program to unlock the
source key??
The plc program:
https://we.tl/t-LJAzOh0Jr8
Thank you for your time and attention! It is in studio5000 v28 and i converted to v30
Re: [?]: HOW TO REMOVE SOURCE PROTECTION IN RSLOGIX5000
Posted: Tue Feb 07, 2023 12:48 am
by sqhlxdl
Re: [?]: HOW TO REMOVE SOURCE PROTECTION IN RSLOGIX5000
Posted: Sat Mar 11, 2023 2:45 am
by danangkarunia77
hello anyone can help me to remove source protection from my file.
Thanks In Advance