Fault of upload PLC micro850 2080-LC50-48QWB

RSLinx, RSLogix, RSView, LogixPro ...
Post Reply
RDIAS
Posts: 1
Joined: Sat Oct 17, 2020 10:10 am

Fault of upload PLC micro850 2080-LC50-48QWB

Post by RDIAS » Sat Oct 17, 2020 3:05 pm

Morning!
I can't upload from PLC micro 850 2080-LC50-48QWB.

I can see the PLC using RSLinx Classic, I see the PLC's ip 192.168.1.11, I perform the correct procedure in the CCW but I am not successful.
I have already uninstalled and chosen ccw, I have also changed from version 12.00 to version 11.00 of ccw.

the attached fault log generated in both ccw version 11 and ccw version 12 is attached.

My PC's windows are Windows 10 home single linguage

https://drive.google.com/file/d/1F85tW2 ... sp=sharing
https://drive.google.com/file/d/1Mj1W5d ... sp=sharing

Can you help me?

TcoSj
Posts: 10
Joined: Fri Oct 25, 2019 12:43 pm

Re: Fault of upload PLC micro850 2080-LC50-48QWB

Post by TcoSj » Tue Oct 20, 2020 11:49 am

Hello! Have you tried to load and unload the program on the simulator?

Post Reply