SLC 504 to SCADA

RSLinx, RSLogix, RSView, LogixPro ...
Post Reply
sandumon84
Posts: 23
Joined: Thu Dec 18, 2014 4:52 pm

SLC 504 to SCADA

Post by sandumon84 » Mon Oct 08, 2018 6:59 pm

HI,

We have an SLC504 PLC which is already connected to an HMI by using RS485 port (DH+) we are tying to install a SCADA to interface with this PLC so I would like to know if its possible to interface the PLC to scada via same port by using DH+ protocol.



Regards
Sandy

Post Reply