Cannot access 1756 L75 using RSLOGIX 5000 v20.01
Posted: Thu Nov 24, 2016 2:04 pm
Hi masters,
I tried to communicate my PLC 1756 L75 using rs logix 5000 v 20.01 but I cannot communicate with it.
The steps I used is as follows:
1.) Change the IP address of my laptop to the same network with my plc and ping it. Ping was successful.
2.) Turn off fire wall.
3.) Open rs logix 5000. Since i don't have the program I use "Who's Active".
4.) It opened a panel and we did not get any link for the PLC.
I am using RS logix 5000 and RS Linx Classic Lite.
Please help me to communicate with my plc.
Thanks
I tried to communicate my PLC 1756 L75 using rs logix 5000 v 20.01 but I cannot communicate with it.
The steps I used is as follows:
1.) Change the IP address of my laptop to the same network with my plc and ping it. Ping was successful.
2.) Turn off fire wall.
3.) Open rs logix 5000. Since i don't have the program I use "Who's Active".
4.) It opened a panel and we did not get any link for the PLC.
I am using RS logix 5000 and RS Linx Classic Lite.
Please help me to communicate with my plc.
Thanks