FactoryTalk View Studio ME (9.00) ERROR THAT I CAN'T FIGURE.

RSLinx, RSLogix, RSView, LogixPro ...
Post Reply
JohnnyQuanex
Posts: 1
Joined: Sat Nov 05, 2016 1:28 pm

FactoryTalk View Studio ME (9.00) ERROR THAT I CAN'T FIGURE.

Post by JohnnyQuanex » Sat Nov 05, 2016 1:39 pm

Folks,

I've not had this problem before and it is likely something stupid that I did to cause this...

Below is the error message I get when I try to create a runtime application (.MER) for my PV Plus 7 Standard (Using firmware 7)


__________________________________________________ _____________

*** Start RSLinx Enterprise Conversion Messages ***

ERROR: Unsupported driver detected. Driver name = "RSLogix 5000 Emulator". Description:
Only the Ethernet driver is supported by PanelView Plus 7 Standard Machine Edition applications. Only the Ethernet,
Serial DF1 and Serial DH485 drivers are supported by Compact Machine Edition applications.

*** End RSLinx Enterprise Conversion Messages ***

Validation completed with errors. The runtime application has NOT been created.

__________________________________________________ _____________

I haven't had this happen before; I was trying to setup the emulator awhile back so I could run in design time from my desk, but I don't know what to do or how solve this problem...

Hope you can help...

Thanks so much in advance...

John Whited

Post Reply