RsLinx EthernetIP config

RSLinx, RSLogix, RSView, LogixPro ...
Post Reply
rumun1990
Posts: 7
Joined: Fri Oct 19, 2012 12:51 pm

RsLinx EthernetIP config

Post by rumun1990 » Thu Mar 06, 2014 2:18 pm

Hi,I can't find in my RSLinx my micrologix processor.
Which of this things must be the same on both devices subnet mask and/or default gateway ?
my pc ip is 143.02.01.01 , and micrologix ip is 143.04.06.93

I think i have to change on micrologix ip for 143.02.01.xx and the subnet mask must be the same like pc subnet mask ?

eastman
Posts: 8
Joined: Thu Sep 23, 2010 1:14 am

Re: RsLinx EthernetIP config

Post by eastman » Wed Mar 19, 2014 1:53 pm

Your IP must same route both PC and PLC
for example:
PC IP:192.168.1.1 subnet 255.255.255.0
PLC IP:192.168.1.3 subnet 255.255.255.0
HMI IP: 192.168.1.4 subnet 255.255.255.0
Hope this can help (pgood)

Post Reply