PLCforum.uz.ua

ho guys,
do you have Studio 5000 Logix Designer (RSLogix v21)?

I heard some good feedbacks on this one?


Thanks

Studio5000 21.00.01.part10:
http://d.119g.com/f/0B900A8F660A03E9.html

Studio5000 21.00.01.part09:
http://d.119g.com/f/30566736D463138D.html

Studio5000 21.00.01.part08：
http://d.119g.com/f/3B69228834CDE544.html

Studio5000 21.00.01.part07：
http://d.119g.com/f/2CD496136754A0F5.html

Studio5000 21.00.01.part06：
http://d.119g.com/f/52A5D4803757B077.html

Studio5000 21.00.01.part05：
http://d.119g.com/f/312BC852A5EAD985.html

Studio5000 21.00.01.part04：
http://d.119g.com/f/B0CA210D1779D35D.html

Studio5000 21.00.01.part03：
http://d.119g.com/f/3ED189C0C07AC838.html

Studio5000 21.00.01.part02：
http://d.119g.com/f/A00190C259884264.html

Studio5000 21.00.01.part01：
http://d.119g.com/f/09236F670571E83C.html

Hi you ,
You have other link ? you can upload on Rapishare or Mediafile or Mega ...
Because ,I don't download from wed of you .I do not know ,how to download it,
Can you guide me ,how to download this link.
please help us ,
Regards.

To download is not hard.

First click on download the file option



then click on the download now option.



Quick side note.
This is a 2.3GB ISO file with Rslinx 3.51 and studio 5000 v21.0
It also comes with factory talk activation manager 3.51

Hi you ,
I try ,but I can't download it ,
Regards,

does not work...

I use firefox with noscript and adblockplus
I temporary allow 119g.com and all the buttons appear as per my previous email.
The above links still work.

Try this direct link and let me know if it works.

Part01
Part02
Part03
Part04
Part05
Part06
Part07
Part08
Part09
Part10

When i install the software then it requires serial. What is the serial number?

I will try to do it. Thanks for guolinbin sharing file.

hardly to download from 119G. is that possible other people provide other link?

New Links 01.10.2013

http://hotfile.com/dl/247523578/0c56f71/S5KV21.part01.Link_is_Dead :(
http://hotfile.com/dl/247526620/a247688/S5KV21.part02.Link_is_Dead :(
http://hotfile.com/dl/247530644/2b1501a/S5KV21.part03.Link_is_Dead :(
http://hotfile.com/dl/247533075/8398e66/S5KV21.part04.Link_is_Dead :(
http://hotfile.com/dl/247535430/b98b94b/S5KV21.part05.Link_is_Dead :(
http://hotfile.com/dl/247537743/b2742c4/S5KV21.part06.Link_is_Dead :(
http://hotfile.com/dl/247540125/e80f3d4/S5KV21.part07.Link_is_Dead :(
http://hotfile.com/dl/247544837/b30c10d/S5KV21.part08.Link_is_Dead :(
http://hotfile.com/dl/247550092/52aa481/S5KV21.part09.Link_is_Dead :(
http://hotfile.com/dl/247552341/9969701/S5KV21.part10.Link_is_Dead :(
http://hotfile.com/dl/247554570/36ce4bb/S5KV21.part11.Link_is_Dead :(
http://hotfile.com/dl/247557277/1ef8805/S5KV21.part12.Link_is_Dead :(
http://hotfile.com/dl/247562183/cf40cef/S5KV21.part13.Link_is_Dead :(
http://hotfile.com/dl/247566475/e3f1cdc/S5KV21.part14.Link_is_Dead :(
http://hotfile.com/dl/247575197/14aa3a8/S5KV21.part15.Link_is_Dead :(
http://hotfile.com/dl/248150529/8ebc208/S5KV21.part16.Link_is_Dead :(
http://hotfile.com/dl/248199622/50dc008/S5KV21.part17.Link_is_Dead :(
http://hotfile.com/dl/248203952/b4737b1/S5KV21.part18.Link_is_Dead :(
http://hotfile.com/dl/248206427/2417765/S5KV21.part19.Link_is_Dead :(
http://hotfile.com/dl/248317527/d201126/S5KV21.part20.Link_is_Dead :(
http://hotfile.com/dl/248320232/2089dac/S5KV21.part21.Link_is_Dead :(

Thank you

Dear mertosgalim
Can you re upload part 7 and 13 please?
Regards

Dear mertosgalim
I had a problem in my net connection, I fix it and download the links and it is worked normally(No need to re upload them again)
Thak you very much
Omar

hi peterg70 thanks for the great post,
i had a successfull download and extraaction
but it instalation reports error in cab file and instalation terminmates.
Could you confirm the instalation from rapishare?
Thanks

If you downloaded from the china website and unrar the file you will get an ISO file.
Mount this with some tool and install from the ISO.

This worked for me without issue.

Hi peterg70, I hate to be a bother but this is the only link I can find for studio 5000 and I followed your direction to download from china site, however it wont install in XP SP3 at all and in windows 7 professional it still reports cab file error

Dear all ,
for the link , but I need to activate it please help

Thank you

Hi All!
can someone upload this to Mega, or mediafire? i really try from the chinese page, but it´s too slow, and chrome abort the download at 15 o 20 MB.

thank you

Links don't work

Dear Guolibin,
Please, if you can upload Part07.rar??
Thank you, so much

can anyone refresh links or upload files?

+2 on updating the links or new links please...

Could someone please reupload the links for Studio 5000. The above links are dead.

Thanks in advance!!!

No, it is not dead.
Just checked mega link and it work.
Check it again.
Thanks matro05 for mega link.

shubhank wrote:Could someone please reupload the links for Studio 5000. The above links are dead.

Thanks in advance!!!

I can see that some of the post are made long time ago. are you succeed to activate studio 5000 v21.00.03. If so, then it would be nice of you to share instructionen with me or others in the same situation.I will appreciate any input from those who know the solution
Thanks in advance

I don't suppose you actually tried searching the forum? No? Thought not.

+1

I installed Studio 5000 v21 but found out that my ControlLogix not compatible with v21. I have a controller 1756-L61 and need a previous version. I have searched in this forum following the proposed version, but found out that the links are no longer accessible. I would appreciate it if anyone can share a RSLogix 5000 v16 with me

Hello everyone, I need to program a CompactLogix 5370 L2 controller, so I need a v20 or above of RSLogix 5000, prefebly v21 i.e. Studio 5000. I saw the download links for all it's parts but i found those links are not working. Can someone please provide me with new working download links of all it's parts. Thank You


Also, I saw someone is in need of a v16 to program a ControlLogix controller. I have a link from rockwell for a 90 days demo of v17, the link still works. I hope v17 will do for you instead of v16 and 90 days time will be quite enough for your project I hope. All you need is an account at at Rockwell's website which is free to create.


Here is the link https://files.rockwellautomation.com/UR/V17_Demo.zip

Please someone upload or provide the link for v21 as soon as possible. Thanks

-----------------------------------------------------------------------------------------------------------------------
Sharing Is Caring B-)

Daydreamer, How come when l do a search l can find V20 (it says it's a lite version, but it is most probable full when licensed) and it downloads, are you living up to your name?viewtopic.php?f=12&t=22386

Duckman brother, I really wasn,t able to find version 20. Thank You very much

What is the serial number?

pls send me the link regard studio 5000 logix designer..

Hello,

The links are no longer valid, can anyone share?


Regards

help, please some one, installed studio 5000 design logix, hexedit all the required files, even did fresh install to be sure, i still keep getting grace period.
activation manager list all the license available but total available is n/a, borrowed is n/a, in use is n/a, expires is n/a.

thanks to you all.

Has anyone successfully installed this software and validated the keys? if so, could you share your process?

hassan asia, thank you, kind man !!!

hassan asia wrote: ↑

Sun Sep 02, 2018 5:23 am

https://mega.nz/#F!Nxo1EKJQ!GTL7loUdjVWNBQ4BdbdGSQ

Hello, can someone share the procedure to install rslogix5000 package? I download the package , I am having hard time to inatall it. Thank you in advance.

Link does not have anything with it. Nothing is ther in mega. Please reupload

https://drive.google.com/folderview?id= ... InKZtPs_1K

Good luck

Dear All,

Please update link Studio 5000 Logix Designer V31

Thank you

Dear All,

Please update link Studio 5000 Logix Designer V20 and above

Thank you

Hello i was checking all the Links here but non of them are available now. if there is a good person that can update the LINK it can be surely ba help. Thank you in advance!

Hi!
Can somebody share studio logiv 5000 V30 with crack please?

Thanks in advance

Hi dear brother's and Sister's,

Can any one have time for upload rslogix 5000 or Studio 5000

If do this then make help many people.

bashersh46 wrote: ↑

Wed Mar 09, 2022 12:05 am

Hi dear brother's and Sister's,

Can any one have time for upload rslogix 5000 or Studio 5000

If do this then make help many people.

Check this link:
https://www.youtube.com/watch?v=AjTp0vN ... l&index=36

Thanks for your reply.

But dear this link doesn't have any video.

Can you give me again.