[?]: Old 5330 processor Programming

RSLinx, RSLogix, RSView, LogixPro ...
Post Reply
emulefan
Posts: 27
Joined: Sat Feb 10, 2007 3:19 pm
Location: Argentina

[?]: Old 5330 processor Programming

Post by emulefan » Sun Jun 12, 2011 5:32 pm

Hi, I need to make a program for an old PLC (a 1769-L30 with a 5330 processor), but i have a RsLogix5000 V16 software and in the processor´s list the 5330 doesn´t appear.
What can i do?
I must install and old version (like V13) of the software? or there is another way to solve my problem?

Thanks in advance
Top
Ryzhij
Posts: 406
Joined: Mon Mar 31, 2008 11:29 am
Location: Ryazan, Russia

Re: [?]: Old 5330 processor Programming

Post by Ryzhij » Mon Jun 13, 2011 3:01 am

emulefan wrote:I must install and old version (like V13) of the software?
Yes. Because the highest version of firmware for this processor is 13.19.
Version of firmware and software version RSLogix5000 must match.
http://support.rockwellautomation.com/controlflash/
Top
emulefan
Posts: 27
Joined: Sat Feb 10, 2007 3:19 pm
Location: Argentina

Re: [?]: Old 5330 processor Programming

Post by emulefan » Mon Jun 13, 2011 4:32 am

OK, thanks for your help. I will try to find the V13 to install it.

Regards
Top
Post Reply

Return to “Allen-Bradley (Rockwell Automation)”