[?]: How to upload file from 2711-B5A8 PV550 Key/Touch?

RSLinx, RSLogix, RSView, LogixPro ...
Post Reply
d4ni_R
Posts: 18
Joined: Mon Jul 07, 2008 7:25 am
Location: Georgia

[?]: How to upload file from 2711-B5A8 PV550 Key/Touch?

Post by d4ni_R » Fri Jun 12, 2009 11:06 am

Hi all,

I have a problem uploading/downloading file from/to 2711-B5A8 PV550 Key/Touch.
I use a down loader cable DB9 Female to female port with connection;

Code: Select all

2 ---- 3
3 ---- 2
5 ---- 5
7 ---- 8
8 ---- 7
Is that connection correct?
Does anyone know the correct one?
Please, i really need it asap.
Thank you. :? :(

dehell
Posts: 104
Joined: Sat Jun 13, 2009 12:25 pm
Location: Europe

electrical connexion

Post by dehell » Sat Jun 13, 2009 12:43 pm

Look at this link:

Image

or
http://rapidshare.com/files/244067481/PB32.JPG.html

Be careful, your RS linx driver must setup : "startup=manual"

d4ni_R
Posts: 18
Joined: Mon Jul 07, 2008 7:25 am
Location: Georgia

Post by d4ni_R » Mon Jun 15, 2009 8:03 am

Thanks dehell,

I got message;

http://img190.imageshack.us/img190/948/upload1y.jpg

http://img19.imageshack.us/img19/3549/upload2n.jpg

Could you suggest me what to do? How to disable printer port?
:?:

Ryzhij
Posts: 404
Joined: Mon Mar 31, 2008 11:29 am
Location: Ryazan, Russia

Post by Ryzhij » Mon Jun 15, 2009 12:32 pm

Then your PC and Panel are connected via cabel, you can try:
1. Open the RSLinx and sure that the DF1 driver is runing. If it not, to install and start it.
2. In the DF1 driver properties you must to select the device, com-port # and then to press "auto setting" button. Wait for link establish.
After this you can start (or switch to) the PanelBuilder software and to upload/download aplication from/to the PV

Post Reply