CompactLogix 5380 IP adress

RSLinx, RSLogix, RSView, LogixPro ...
Post Reply
dimail
Posts: 12
Joined: Tue Aug 30, 2011 8:57 am

CompactLogix 5380 IP adress

Post by dimail » Mon Sep 07, 2020 5:31 am

Так и не понял, на какой тут языке лучше писать. Напишу на двух.

Каждый раз после выключения питания слетает ИП адрес у ПЛК. Выставляю его через BootP Tool или через BootP DHCP Server. В BootP в поле тип у него DHCP, выставляю нужный, но потом не могу отключить DHCP режим, выдает ошибку "Get_attribute_single".

Each time the power is turned off, the IP address of the PLC is erased. I expose it through the BootP Tool or through the BootP DHCP Server. In BootP, in the type field it has DHCP, I set the desired one, but then I cannot turn off the DHCP mode, it gives the "Get_attribute_single" error.

pic
Image

TcoSj
Posts: 8
Joined: Fri Oct 25, 2019 12:43 pm

Re: CompactLogix 5380 IP adress

Post by TcoSj » Fri Sep 11, 2020 1:59 pm

Is there a battery in this plc?

dimail
Posts: 12
Joined: Tue Aug 30, 2011 8:57 am

Re: CompactLogix 5380 IP adress

Post by dimail » Mon Sep 14, 2020 2:24 pm

Problem was mith my Soft. I have reinstalled RX Linx and it was ok!

Post Reply