wifi connection cx-programmer and cj2m

CX-One, CX programmer, NTST, Syswin ....
Post Reply
svetoslavslav
Posts: 1
Joined: Wed Feb 11, 2015 6:27 pm

wifi connection cx-programmer and cj2m

Post by svetoslavslav » Sun Aug 29, 2021 12:08 pm

How to replace the connection with an Ethernet cable with wifi (cx-programmer and cj2m) or (sysmac studio and na5 hmi)?
I know that using a device such as a router / repeater / access point. But I don't know exactly how to configure it.

euovitoteu
Posts: 4
Joined: Fri Dec 18, 2020 1:37 pm

Re: wifi connection cx-programmer and cj2m

Post by euovitoteu » Fri Sep 17, 2021 9:26 am

I often use a wifi connection between a CJ2 and the PC via a portable router. I set a fix IP address to the LAN port of the router, in the same range as PLC, I connect the PC to the wifi the router generates and that´s all. The PCs wifi is set to DHCP so that it could get the IP from the router.

Post Reply