Help ! Backup PLC cannot read

CX-One, CX programmer, NTST, Syswin ....
Post Reply
Siung76
Posts: 5
Joined: Fri May 28, 2021 8:22 pm

Help ! Backup PLC cannot read

Post by Siung76 » Fri May 28, 2021 8:30 pm

Please help me , I dont know whats wrong happen , during backup PLC, the Log is success but it cant read by CX, now the PLC is ERR / ALM Lit
file in : https://drive.google.com/file/d/104O4ez ... sp=sharing

Siung76
Posts: 5
Joined: Fri May 28, 2021 8:22 pm

Re: Help ! Backup PLC cannot read

Post by Siung76 » Mon May 31, 2021 2:08 pm

Anyone can help ?

Toms
Posts: 170
Joined: Sat Oct 26, 2019 5:56 am

Re: Help ! Backup PLC cannot read

Post by Toms » Mon May 31, 2021 7:52 pm

Please try to use a CF card for backup

Siung76
Posts: 5
Joined: Fri May 28, 2021 8:22 pm

Re: Help ! Backup PLC cannot read

Post by Siung76 » Tue Jun 01, 2021 12:49 am

Is it possible to backup with CF, even when the Red ERR/ALM lit, Mr Toms ? Can you tell me how to do it ? Thank You

Toms
Posts: 170
Joined: Sat Oct 26, 2019 5:56 am

Re: Help ! Backup PLC cannot read

Post by Toms » Tue Jun 01, 2021 10:08 am

1. Set DIP-7 on the CPU to On, insert an empty memory card, and power on the PLC;
2. Long press the power button on the top of the CF card slot (more than 3 seconds) until the yellow BUSY light is on;
3. The light is off (the backup is over), the PLC is powered off, DIP-7 is set to Off, and the memory card is taken out;

In the case of ERR, the program may not be backed up, and your CPU has been severely damaged!
Good luck!

Siung76
Posts: 5
Joined: Fri May 28, 2021 8:22 pm

Re: Help ! Backup PLC cannot read

Post by Siung76 » Tue Jun 01, 2021 10:19 am

Thanks Mr Toms, I'll try CF
in case CF backup fail, any way to erase all program inside so I can write a new one ?
of any other way to fix this CPU ERR/ALM lit ?
I think I know the reason the ERR/ALM lit is, becasue I am using software to erase UM Password , will this kinda software damaged be fixed somehow ?

Thank You

Siung76
Posts: 5
Joined: Fri May 28, 2021 8:22 pm

Re: Help ! Backup PLC cannot read

Post by Siung76 » Wed Jun 02, 2021 2:30 am

Dear MR Toms, CF if successfull, but this is inside : https://drive.google.com/file/d/1YyqqOf ... sp=sharing
I am not understand how to open the file, can you help me ? I try CX but error message only,

Thank You

Post Reply