need help for hmi omron

CX-One, CX programmer, NTST, Syswin ....
Post Reply
ahmedmh
Posts: 3
Joined: Sun Jul 16, 2017 9:35 am

need help for hmi omron

Post by ahmedmh » Sun Jul 16, 2017 9:54 am

i have hmi omron nt600s-st211 ev3 in my factory and have problems in touch ]
i want to change it to delta dop if some one helps me to make adresses of input and outputs and data entering

wildpikachu
Posts: 7
Joined: Wed Mar 02, 2016 10:12 am

Re: need help for hmi omron

Post by wildpikachu » Mon Jul 17, 2017 12:04 pm

What CPU are you using?

ahmedmh
Posts: 3
Joined: Sun Jul 16, 2017 9:35 am

Re: need help for hmi omron

Post by ahmedmh » Tue Jul 18, 2017 1:29 pm

i have cqm1 cpu43

wildpikachu
Posts: 7
Joined: Wed Mar 02, 2016 10:12 am

Re: need help for hmi omron

Post by wildpikachu » Wed Jul 19, 2017 10:12 am

have you selected the cqm series under your communication settings?

If not then go to the options tab and select communication settings then select "omron" under the manufactures options and then select "c/cpm/cqm series" under the series option.
once that is done you should be able to set the memeory path for your PLC tags on the HMI.

ahmedmh
Posts: 3
Joined: Sun Jul 16, 2017 9:35 am

Re: need help for hmi omron

Post by ahmedmh » Sun Jul 23, 2017 9:33 am

there isn't problem with communication with the new hmi
the problem is how to set the memory data entering in the new hmi dop delta

wildpikachu
Posts: 7
Joined: Wed Mar 02, 2016 10:12 am

Re: need help for hmi omron

Post by wildpikachu » Mon Jul 24, 2017 8:11 am

I've pm'd you my email address.
Would you mind sending me your DOP file?

Post Reply