Connect CJ2 series with CS

CX-One, CX programmer, NTST, Syswin ....
Forum rules
petar89m
Posts: 2
Joined: Mon Dec 26, 2011 10:07 am

Connect CJ2 series with CS

Post by petar89m » Thu Mar 14, 2013 10:38 am

Is there any possibility to connect CJ2 an CS cpus?
Top
Homeroid_BL
Posts: 259
Joined: Fri Apr 03, 2009 3:24 pm
Location: Bosnia and Herzegovina

Re: Connect CJ2 series with CS

Post by Homeroid_BL » Thu Mar 14, 2013 3:27 pm

Via serial ports.
Top
petar89m
Posts: 2
Joined: Mon Dec 26, 2011 10:07 am

Re: Connect CJ2 series with CS

Post by petar89m » Fri Mar 15, 2013 12:26 pm

sorry that was not the right question to ask. my question is if there is a possibility to connect cj2 cpu to cs backplane.
Top
patoliyarj
Posts: 4
Joined: Thu Oct 25, 2012 11:35 am

Re: Connect CJ2 series with CS

Post by patoliyarj » Fri Mar 15, 2013 1:07 pm

NO, There is no possibility for the module connections as internal cpu bus is different.
CJ series has no back plane but NS had. So CJ is no compatible to NS.
Top

Return to “OMRON PLC & HMI”