[?]: OMRON HMI NS10TV00 V2 Touch screen not work

CX-One, CX programmer, NTST, Syswin ....
Post Reply
isteak007
Posts: 93
Joined: Wed Jul 14, 2010 10:23 am
Location: Bangladesh
Contact:

[?]: OMRON HMI NS10TV00 V2 Touch screen not work

Post by isteak007 » Tue Aug 03, 2010 5:22 pm

MY OMRON HMI NS10TV00 V2 Touch screen's touch system do not work.

So i cant run my machine

What is the Problem?

is there any way to run plc without HMI?

i heard about NS- Runtime & CX- Supervisor this software can run plc without a HMI.
it uses PC as a HMI
Now how can i do it?
i download cx supervisor but i dont know how to do that?

PLEASE HELP

Homeroid_BL
Posts: 259
Joined: Fri Apr 03, 2009 3:24 pm
Location: Bosnia and Herzegovina

Re: [?]: OMRON HMI NS10TV00 V2 Touch screen not work

Post by Homeroid_BL » Wed Aug 04, 2010 7:20 am

Download CX-One.Here you will find CX-Designer included.
In order to control your machine from PC, you will need source project for NS10. Generaly, PLC can normaly run WITHOUT HMI connected (in most cases PLC does not knw if HMI is connected at all), but, you are not able to change parameters and issue commands to machine.

isteak007
Posts: 93
Joined: Wed Jul 14, 2010 10:23 am
Location: Bangladesh
Contact:

Re: [?]: OMRON HMI NS10TV00 V2 Touch screen not work

Post by isteak007 » Thu Aug 05, 2010 7:53 am

I have Source Project but i dont know how can run my machine with cx designer.
do you know How to do it?


Thanks

Homeroid_BL
Posts: 259
Joined: Fri Apr 03, 2009 3:24 pm
Location: Bosnia and Herzegovina

Re: [?]: OMRON HMI NS10TV00 V2 Touch screen not work

Post by Homeroid_BL » Thu Aug 05, 2010 3:34 pm

Open project.
Then Tools/Test/Connect to PLC

Chooose network (works with hostlink ONLY!!!)

isteak007
Posts: 93
Joined: Wed Jul 14, 2010 10:23 am
Location: Bangladesh
Contact:

Re: [?]: OMRON HMI NS10TV00 V2 Touch screen not work

Post by isteak007 » Thu Aug 05, 2010 7:50 pm

Thank You For your reply

Do i need any special Cable?

or cable that used in plc to hmi.

Thank You

Homeroid_BL
Posts: 259
Joined: Fri Apr 03, 2009 3:24 pm
Location: Bosnia and Herzegovina

Re: [?]: OMRON HMI NS10TV00 V2 Touch screen not work

Post by Homeroid_BL » Thu Aug 05, 2010 7:56 pm

You need a PC-PLC cable (cable for CX-Programmer, to connect to PLC)!!!

Post Reply