[?]: How can I change tthe language of NT11-SF121B?

CX-One, CX programmer, NTST, Syswin ....
Post Reply
asman
Posts: 2
Joined: Tue Nov 03, 2009 7:54 am

[?]: How can I change tthe language of NT11-SF121B?

Post by asman » Tue Nov 03, 2009 8:12 am

Hello,
We have anew machine with plc OMRON CP1H and HMI NT11-SF121B-ECV1-CH with RS232C
But the languge of this HMI is Chinese
any one can help me to change the language to English?

Best regards

Homeroid_BL
Posts: 259
Joined: Fri Apr 03, 2009 3:24 pm
Location: Bosnia and Herzegovina

Re: [?]: How can I change tthe language of NT11-SF121B?

Post by Homeroid_BL » Tue Dec 08, 2009 4:58 pm

System language is chinese, or application langage is chinese? If You press F1 and F2 during NT11S startup, do You see a System Menu in chinese or in english?

ZENDER1
Posts: 21
Joined: Fri Jan 11, 2013 12:42 pm

Re: [?]: How can I change tthe language of NT11-SF121B?

Post by ZENDER1 » Thu Jan 24, 2013 5:02 pm

you can download project from PT. Translate it by using translation support utility. And upload it back.
translation support utility and NTST-E V4.82 you can find here http://z-forever.com/w/doku.php/soft:omron:ntst. Pinouts for cable here http://z-forever.com/cables/list.php

alex0under
Posts: 2
Joined: Fri Oct 04, 2013 1:49 pm

Re: [?]: How can I change tthe language of NT11-SF121B?

Post by alex0under » Fri Oct 04, 2013 2:00 pm

System language of this panel is Chinese.
Only Resource loader language is English.
More of them, I couldn't download NT11-V1 firmware to the NT11-SF121B-ECV1 (need NT11-ECV1) with NT System Installer 2.0 ("different target PT H/W").
Can anyone help me with firmware for NT11-SF121B-ECV1?

alex0under
Posts: 2
Joined: Fri Oct 04, 2013 1:49 pm

Re: [?]: How can I change tthe language of NT11-SF121B?

Post by alex0under » Mon Oct 07, 2013 7:32 am

Ok, the problem with NT11 is solved. Set DIP Switch 6 & 5 on, then power on and erase system. Install new system NT-V1 (with English). Now NT11 is English and functioning correctly.

Post Reply