[?]: WinLC + CP5611 + S5 digital I/O cards ?

SIMATIC S7-200/300/400, Step7, PCS7, CFC, SFC, PDM, PLCSIM,
SCL, Graph, SPS-VISU S5/S7, IBHsoftec, LOGO ...
Post Reply
dekor
Posts: 114
Joined: Wed Jan 03, 2007 9:10 pm
Location: Europe

[?]: WinLC + CP5611 + S5 digital I/O cards ?

Post by dekor » Sun Dec 28, 2008 7:36 pm

Dear friends,

Can be used next configuration as PLC?
WinLC + CP5611 + ET200U + S5 digital I/O cards.

All the best and
Happy New Year !!!

dekor

marcs7
Posts: 52
Joined: Fri Jun 08, 2007 4:00 pm
Location: Europe

Post by marcs7 » Sun Dec 28, 2008 8:22 pm

From siemens forum :
With the ET200U (MLFB: 6ES5 318 8MB12 or 6ES5318-8MB13) you can use either the DP-SIEMENS- or the DP standard protocol. The protocol desired can be selected with the switch block of the interface module. If you are using an S7 master (e.g. CPU 316-2 DP), switch 8 must be switched on.
be careful the ref of your ET200U in the lower reference you cant do Standard Dp, for the rest it's just programming ..

Post Reply