Page 1 of 1

[LINK]: SIPROTEC DIGSI 4.83/4.85/4.89

Posted: Thu Oct 16, 2008 8:11 pm
by Maxx
Please post a link to download DIGSI 4.8 or 4.7
Software for Configuration of SIPROTEC 4 Devices
http://siemens.siprotec.de/download_neu/index_e.htm

I have v4.4, but need new
viewtopic.php?t=8637&highlight=digsi
Russian wrote:Коллеги, срочно! Нужен DIGSI 4.8 или 4.7.
Нашел здесь v4.4, к сожалению не подходит.
viewtopic.php?t=8637&highlight=digsi

DIGSI 4.81 and 4.82

Posted: Tue Feb 10, 2009 4:29 pm
by Link
I've DIGSI 4.81 and 4.82 but each version had bigger size about 1GB.
I can't share to you due to my net very slow :cry: :cry: :cry:
If you can download by bit torrent maybe posible for me. :) :o :lol:

I'm sharing DIGSI4 update V4.82 on the Torrent link as following:

http://www.demonoid.com/files/details/1 ... 1235029886

Serial 13779-0127-10639

Enjoy download

Posted: Sat Feb 21, 2009 8:36 pm
by Link
SIPROTEC DIGSI 4.82
8x45000 KB + 1x26472 KB
Links:

rapidshare [dead]

SIPROTEC DIGSI 4.82 Devices
13x45000 KB + 1x17486 KB
Links:
rapidshare [dead]

serial number :13779-0127-10639

Posted: Tue Feb 24, 2009 7:06 pm
by Klong
Umencho wrote:Hello
You can use old one viewtopic.php?t=6201&highlight=digsi
I used and finish with installation successfully. But later after restart the PC and start the program, receive message that needs ALM. I used my home notebook and there I haven't this software. I think that this isn't be usefull but you can try and post the result.
regards
ALM mean Automation License Manager.
If it's posible please install WinCC first after that Digsi.
Please check ALM service by run services.msc, ALM should be started.
I want to see receive message picture, please capture your screen display.

Posted: Thu Feb 26, 2009 11:20 am
by laboul2
you can used this serial number :13779-0127-10639 (for digsi 4.7) with digsi4.82 normally without problem

thank you a lot, great job

Posted: Thu Feb 26, 2009 5:37 pm
by Umencho
Hello
[ALM - A... license man...] :wink: Ok.
Is this works without WinCC/
regards

Posted: Mon Apr 06, 2009 11:32 am
by Maxx
Thanks to all very much.
I've got DIGSI 4.8, but in this version they use CFC 6.1. Do they use CFC 7.0 in this one?

Posted: Mon Jul 27, 2009 11:54 am
by samedsoft
DIGSI PROFESSIONAL + IEC61850 is needed!!!

Also licence and serial numbers if necessary

Thanks

[LINK]: SIPROTEC DIGSI 4.83

Posted: Sat Jun 05, 2010 7:06 am
by Link
SIPROTEC DIGSI v4.83 (MultiLanguage)
12*100.000.000 + 11.626.780 bytes
rapidshare [dead]

Hotfix 2 for / zu DIGSI 4.83 http://siemens.siprotec.de/download_neu/index_e.htm
http://siemens.siprotec.de/download_neu ... 83_HF2.zip

SN: 13779-0127-10639
Image

Image Torrent http://rutracker.org/forum/viewtopic.php?t=2967350
Direct link for your torrent client
rapidshare [dead]

Documentation
http://siemens.siprotec.de/download_neu/index_e.htm
Russian wrote:Digsi 4 управляющая программа для устройств SIPROTEC 4
DIGSI 4 удобная и дружественная к пользователю программа для конфигурирования и установки уставок в устройствах защиты.
При помощи редактора дисплея Вы можете полностью свободно нарисовать первичную схему присоединения и управлять коммутационными устройствами из реле Встроенные средства позволят Вам проверить токовые цепи устройства, монтажную схему и передачу сигналов для защиты и системы управления подстанцией. Это позволит сократить время ввода в работу При помощи редактора CFC можно устанавливать связь между сигналами и функциональными блоками в графическом виде для реализации пользовательских логических функций
При помощи программы DIGSI Remote 4 можно установить связь из офиса через модем с реле зашиты SIPROTEC 4 и управлять реле так, как если бы Вы находились на подстанции
Русский интерфейс
Image

http://siemens.siprotec.de/download_neu ... _A1_RU.pdf
http://siemens.siprotec.de/download_neu ... 003_RU.pdf
http://siemens.siprotec.de/download_neu ... 004_RU.pdf

IEC 61850

Posted: Thu Jun 24, 2010 2:45 pm
by mohammed yousif
I have digsi software vesion 4.82 when I try with the exercise fo IEC61850 and when I insert new object , IEC61850 station and then go to its object properties, appear message on computer screen tale me that " the required license is not installed " . and then I cannot continuouse with this exercise . please can you help me to solve this problem ?
with my respect

Re: [LINK]: SIPROTEC DIGSI 4.83

Posted: Sun Jun 27, 2010 4:32 pm
by laboul2
hello, request DIGSI 4.83 UPLOADED on narod.ru if possible; thank's

Re: IEC 61850

Posted: Tue Jun 29, 2010 5:32 am
by focus
mohammed yousif wrote:I have digsi software vesion 4.82 when I try with the exercise fo IEC61850 and when I insert new object , IEC61850 station and then go to its object properties, appear message on computer screen tale me that " the required license is not installed " . and then I cannot continuouse with this exercise . please can you help me to solve this problem ?
with my respect
You have to uninstall digsi, and install with this code 10355-0255-58139 (pgood)

Re: [LINK]: SIPROTEC DIGSI 4.83

Posted: Fri Sep 10, 2010 2:42 pm
by segamega
When i start digsi only this window appears. What's wrong?

Image

Re: [LINK]: SIPROTEC DIGSI 4.83

Posted: Fri Sep 10, 2010 3:58 pm
by CoMod
I have tested with clear VirtualBox - it work Ok.

Re: [LINK]: SIPROTEC DIGSI 4.83

Posted: Thu Nov 04, 2010 9:11 pm
by mdanijel
Hello, I have installed DIGSI 4.83 with given serial number, but when starting it asks for valid license key
(Message: "No valid license key found. Please install valid license key")
. Did I miss something?
Also installed SP1 and Patch1, nothing changed.

Thanks!

Re: [LINK]: SIPROTEC DIGSI 4.83

Posted: Tue Nov 23, 2010 7:53 pm
by samal_jspl
Dear All

I can't download the digsi 4.83 file please post a link for the same and obliged. (sdown)

Re: [LINK]: SIPROTEC DIGSI 4.83

Posted: Tue Oct 18, 2011 1:15 pm
by laboul2
hello all members
digsi 4.84 is now avaible, i have update but i don't have full dvd 4.84 (compatible with windows 7)
update:
http://siemens.siprotec.de/download_neu ... wnload.zip
request full dvd 4.84

Re: [LINK]: SIPROTEC DIGSI 4.83

Posted: Wed Oct 26, 2011 6:35 pm
by laboul2
DIGSI 4.85 update is available here. It can be installed over DIGSI 4.83.
http://siemens.siprotec.de/download_neu ... wnload.zip 1. 64-bit operating system support
2. Support of new Feeder Automation Controller 7SC80
3. Feeder Automation Sequence Editor (FASE)
4. Support of new Smart IED 7SJ686
5. Support of devices with multiple system interfaces
6. IEC 61850
6.1. In System Configurator, devices can be renamed without loosing configured static reports (CHDOC00032532).
6.2. Fixed sporadic problems when updating IEC 61850 station with third-party ICD (CHDOC00024520).
6.3. Consistent handling of IEC 61850 Interlocking options in DIGSI Configuration Matrix (CHDOC00032037).
7. Import and Export
7.1. Correct export of PROFIBUS DP system interface (CHDOC00032480)
7.2. Modbus system interface export works correctly (CHDOC00023976)
8. Canceled CFC changes are not transferred into device (CHDOC00030608)
9. IEC 60870-5-103
9.1. Fixed problems with 7SJ/SK devices and IEC 60870-5-103 (CHDOC00026078)
9.2. IEC 60870-5-103 address remains unchanged after download settings (CHDOC00036580)
10. Correct indication of sectionalizer (CHDOC00024675)
11. Correct feeder currents shown during bay out of service (CHDOC00024294)
12. Information about incompatible DIGSI versions is shown (CHDOC00028898)
13. User-defined symbols can be controlled in the control display (CHDOC00024032)
14. Start menu shows correct entries although DIGSI and SIMATIC are installed in parallel (CHDOC00039443)
15. All functions available after MLFB change (CHDOC00037752)
16. Show attributes of USB device (CHDOC00025017)
17. Connection with 7SJ80 works also via USB port (CHDOC00024415)
18. Display of distance zone graphic does not crash DIGSI (CHDOC00040336)
19. Improved compatibility of CFC data types (CHDOC00040585)

Re: [LINK]: SIPROTEC DIGSI 4.83

Posted: Fri Nov 11, 2011 8:22 pm
by Maxx
Can anyone reupload DIGSI 4.82???
Please! It's very needed!!

Re: [LINK]: SIPROTEC DIGSI 4.83

Posted: Tue Nov 22, 2011 5:45 am
by mytom123
Hi Guys
I have some problem with IEC 61850 Browser 2.01 that I install in window xp sp3 but I can not run it. For OS Xp sp1, I can run it. So how can I run it in XP SP3?

Brgds.

Re: [LINK]: SIPROTEC DIGSI 4.83/4.85

Posted: Tue Aug 14, 2012 1:31 pm
by tuangp
I can't install early DIGSI on win 7.
Please up load DIGSI 4.84/4.85 full DVD?

Thanks

Re: [LINK]: SIPROTEC DIGSI 4.83/4.85

Posted: Wed Oct 31, 2012 4:43 pm
by stremson
serial
13779-0127-10639
10355-0255-58139
Do not work with DIGSI 4.86
I need serial with IEC61850 ​​license for DIGSI 4.86

Re: [LINK]: SIPROTEC DIGSI 4.83/4.85

Posted: Mon Nov 18, 2013 9:34 am
by tak2750
does anyone have digsi 5?
or 4.85?

Re: [LINK]: SIPROTEC DIGSI 4.83/4.85

Posted: Fri Nov 29, 2013 9:14 pm
by fcakmak2004
Does anyone have digsi 4.86 Serial?
(h)

Re: [LINK]: SIPROTEC DIGSI 4.83/4.85

Posted: Fri Dec 06, 2013 2:52 am
by mytom123
Does anyone have digsi 4.86 Serial?
Try it : 15955-0255-57489

Brgds

Re: [LINK]: SIPROTEC DIGSI 4.83/4.85

Posted: Sun Dec 08, 2013 9:09 am
by fcakmak2004
OK. (clap)
Thank mytom123 very much...
:lol:

Re: [LINK]: SIPROTEC DIGSI 4.83/4.85

Posted: Tue Jan 07, 2014 12:48 am
by mahmoud amin
-please
*may i have serial number for IEC 61850 system configrator v4.87
*digsi 5 software.

Re: [LINK]: SIPROTEC DIGSI 4.83/4.85

Posted: Sun Apr 06, 2014 1:35 pm
by KakouSiemens
Hi everybody,

I am under Win7 and would need at a minimum the version 4.84. Could one of you post a torrent for version >8.84.

Many thanks in advance,

Re: [LINK]: SIPROTEC DIGSI 4.83/4.85

Posted: Sat May 17, 2014 3:17 pm
by Update
Workaround for installing Digsi update downloaded from siemens site on a clean system.
Tested with digsi v4.89 on Win7 x64, works great. Found this fix on russian forum i'm not an author.
Instructions in side.
Digsi installer
1. Download Digsi update from siemens site ( current v4.89)
2. Extract downloaded zip
3. To folder containing Digsi setup.exe copy instal.dat and 4.87_x32.reg if installing
on 32bit system or 4.87_x64.reg if installing on 64bit system. Rename copied file to sim_reg.reg or modify
install bat accordinglly.
3. Launch install.bat to start setup.

Code: Select all

reg import "%cd%\sim_temp.reg"
%cd%\digsi_4\setup.exe -SA

Code: Select all

REGEDIT4

[HKEY_LOCAL_MACHINE\SOFTWARE\SIEMENS]

[HKEY_LOCAL_MACHINE\SOFTWARE\SIEMENS\DIGSI4]

[HKEY_LOCAL_MACHINE\SOFTWARE\SIEMENS\DIGSI4\USERINFO_TEMP]

[HKEY_LOCAL_MACHINE\SOFTWARE\SIEMENS\DIGSI4\USERINFO_TEMP]
"COMPANY"=""
"EXISTINGPATH"="C:\\Siemens\\Digsi4\\"
"NAME"=""
"SERIALNUMBER"="*****-****-*****"
"UPGRADEDIGSI"="TRUE"

Code: Select all

REGEDIT4

[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\SIEMENS]

[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\SIEMENS\DIGSI4]

[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\SIEMENS\DIGSI4\USERINFO_TEMP]
"COMPANY"=""
"EXISTINGPATH"="C:\\Siemens\\Digsi4\\"
"NAME"=""
"SERIALNUMBER"="*****-****-*****"
"UPGRADEDIGSI"="TRUE"

Re: [LINK]: SIPROTEC DIGSI 4.83/4.85

Posted: Tue May 20, 2014 10:00 am
by tuangp
spak wrote:Workaround for installing Digsi update downloaded from siemens site on a clean system.
Tested with digsi v4.89 on Win7 x64, works great. Found this fix on russian forum i'm not an author.
Instructions in side.
Digsi installer
I found the link in siemens site: http://www.energy.siemens.com/ecc_pool/ ... ate_IC.htm

[LINK]: SIPROTEC DIGSI 4.89

Posted: Mon Sep 29, 2014 8:25 am
by Link
SIEMENS DIGSI 4.89
torrent
http://rutracker.org/forum/viewtopic.php?t=4833707
Serial key: 26784-0255-37798

Re: [LINK]: SIPROTEC DIGSI 4.83/4.85/4.89

Posted: Sun Oct 12, 2014 8:47 am
by thanhpham
Does anyone have digsi 4.9 Serial?

Re: [LINK]: SIPROTEC DIGSI 4.83/4.85/4.89

Posted: Mon Oct 13, 2014 5:34 am
by thanhpham
Can anyone reupload DIGSI 4.86?
Please! It's very needed!!

Re: [LINK]: SIPROTEC DIGSI 4.83/4.85/4.89

Posted: Tue Nov 11, 2014 2:16 am
by laboul2
DIGSI 4.9
http://rutracker.org/forum/viewtopic.php?t=4857004
Serial key: 26784-0255-37798

Re: [LINK]: SIPROTEC DIGSI 4.83/4.85/4.89

Posted: Fri Jan 09, 2015 2:58 am
by Rheinhardt
I have installed digsi 4.90 in windows xp 32 bit.
But I cannot connect to siprotec 7sa6111-5mb92 using rs232 through front panel.
Can anyone help please...

Re: [LINK]: SIPROTEC DIGSI 4.83/4.85/4.89

Posted: Fri Sep 04, 2015 5:11 am
by hyder
Need DIGSI 4 Professional trial version.URGENT PLZ

Re: [LINK]: SIPROTEC DIGSI 4.83/4.85/4.89

Posted: Fri Oct 16, 2015 11:51 pm
by nabilafauztin
please re upload, digsi 4.XX dead link

Re: [LINK]: SIPROTEC DIGSI 4.83/4.85/4.89

Posted: Mon Jun 26, 2017 7:29 am
by tuandtt49dh
Hi Everyone
I have a quéstion
Which version of DIGSI 4 compatible with Windows 7 SP1 64 bit and Simatic manager ver 5.5