[?]: how to make a s5 cable for normal notebook

SIMATIC S7-200/300/400, Step7, PCS7, CFC, SFC, PDM, PLCSIM,
SCL, Graph, SPS-VISU S5/S7, IBHsoftec, LOGO ...
Forum rules
liu2002
Posts: 18
Joined: Sun Dec 16, 2007 9:50 am
Location: China

[?]: how to make a s5 cable for normal notebook

Post by liu2002 » Fri Jan 04, 2008 6:28 am

I want to use s5 in the winxp. Now i got the software. But my notebook only has rs232 interface. How to make a cable 9 to 15.
Top
v_katsos
Posts: 32
Joined: Thu Oct 11, 2007 10:43 am
Location: Europe

Post by v_katsos » Fri Jan 04, 2008 7:25 am

happy new yaer!

Have you none cable?

S5 system requires RS232/TTY converter. (Siemens Code: 6ES5734-1BD20)

Another way is the USB cable. But it works only with SIEMENS software for S5. I tried to use it with IBH Softec software unsuccesfully.

What sofware you have for S5??
Top
liu2002
Posts: 18
Joined: Sun Dec 16, 2007 9:50 am
Location: China

Post by liu2002 » Fri Jan 04, 2008 7:35 am

Thanku, my step5 ver. is 7.21. It can run in windows xp. What's the usb cable order number. And I want to make a cable myself. Can i?
Top
v_katsos
Posts: 32
Joined: Thu Oct 11, 2007 10:43 am
Location: Europe

Post by v_katsos » Fri Jan 04, 2008 8:25 am

USB Order No is: PG-USB-Kabel, A-Nr.9359-1 #106214
see here: http://www.ibhsoftec-sps.de/english/Sel ... are_S5.htm
for USB-S5-Current Loop Converter and PC-S5-Current Loop Converter

I don't know if you can make a cable yourself. I use cable PC-S5-Current Loop Converter from Siemens. I was not in want of makikg a cable myself.

So, if you want I will try to do reverse engineering on the PC-S5-Current Loop Converter that I have already and I will send you the schematic and you try to make the cable yourself. Please say me if you want it.

Also, I can give you the above usb cable in half price in comparison with the price that you will see in the link above.
Top
Umencho
Posts: 508
Joined: Mon Jul 16, 2007 12:28 pm
Location: Europe

Post by Umencho » Fri Jan 04, 2008 9:18 am

liu2002 wrote:Thanku, my step5 ver. is 7.21. It can run in windows xp. What's the usb cable order number. And I want to make a cable myself. Can i?
Hi

see here [dead]
But I thing the best solution is to buy this type of cable. :oops:

regards
UMENCHO
Top
dekor
Posts: 114
Joined: Wed Jan 03, 2007 9:10 pm
Location: Europe

RS232 to TTY (current loop)

Post by dekor » Fri Jan 04, 2008 8:12 pm

Dear friend,
from my experience I tell you:
the solution is good, and cheap.
Personally I use drawing from the link S5_COM_TTY_hardware.zip
https://disk.yandex.ru/d/E7g4Fgp_heD7Uw
https://mega.nz/file/iXJVmBYZ#OBN-qw3q3 ... D5DI6JNcvI
version COM_TTY_v1, FOR SEVERAL YEARS and works fine.
About the soft I use the PG-95 (PG-2000), and is excellent .

All the best ,
dekor
Top
klamous
Posts: 3
Joined: Sat Dec 02, 2023 9:30 am

Re: [?]: how to make a s5 cable for normal notebook

Post by klamous » Sat Dec 16, 2023 9:27 pm

Dear Sir,
please can you re-upload this two files
[dead] S5_COM_TTY_hardware.zip
Top
CoMod
Site Admin
Posts: 3977
Joined: Thu Feb 16, 2006 3:25 pm
Location: Russia

Re: [?]: how to make a s5 cable for normal notebook

Post by CoMod » Wed Jan 03, 2024 8:25 am

S5_COM_TTY_hardware.zip
https://disk.yandex.ru/d/E7g4Fgp_heD7Uw
https://mega.nz/file/iXJVmBYZ#OBN-qw3q3 ... D5DI6JNcvI

Code: Select all

https://disk.yandex.ru/d/E7g4Fgp_heD7Uw
https://mega.nz/file/iXJVmBYZ#OBN-qw3q36XusGJ0RDvqKXxdCmWMaWcNxD5DI6JNcvI
Top
klamous
Posts: 3
Joined: Sat Dec 02, 2023 9:30 am

Re: [?]: how to make a s5 cable for normal notebook

Post by klamous » Wed Feb 21, 2024 9:13 pm

Dear Sir Mr. CoMod
I have no words to express my gratitude and thanks to you.
Thank you very much for your upload.
Top

Return to “SIMATIC system”