PLCforum.uz.ua

i need a key and PLC-driver Siemens SIMATIC S7 for PLC-ANALYZER pro 4 or 5. somebody could help me?
It´s a very bad program and it's not recommended to use it.

for more infomation look here

http://www.autem.de/e_index.htm


================== boycott of autem.de ======================================
About autem.de see viewtopic.php?f=2&p=34070#p34070
In connection with impudent behaviour, threats and blackmail from outside representatives Autem.de, the request to support campaign on the Internet for the purpose of display of force of our community of engineers and programmers.
Do not buy their production. You can download them free of charge and you will see that they really are not necessary to you.
Place negative responses about production of this company, about poor quality of its production and an overcharge on their production.
Blackmail and threats should not remain unpunished.
The program does not represent interest for programmers and servicemen as represents "that that at chiromancy level" - type of "homoeopathy" for "treatment" of problems in cables.
You can use Siemens Amprolyzer V3.2 Bus Monitor - Diagnostic Software for PROFIBUS http://support.automation.siemens.com/W ... n/18818699

Hello,
I have found version 4.013 on this Link : files.cvalka.net PLC-Analyser pro 4.0.1.3 EN
1.95 Mb
I have tested it with a S5 and it works, to install try the buttons(it`s in Russian), but this cracked version is in English and....German

kaffeemuehle wrote:Sps-analyzer pro 5 crack before long

Where

Where..Where..??Down Here!:)
First Step:Program: ....plc-analyzer5.zip
Number two step:before long!!!

....PLC_Analyzer_crack_sys_dll.rar

By!
*Leslie*

Это только дистрибутив программы без образа ключевой дискеты.
В осле долгое время болтался такой же дистрибутив для версии 4.
Ключа никто не выкладывал. А без него распаковать файлы трудно.
Кто-нибудь знает какие принципиальные изменения в 5 версии?
Вот дрова для других контроллеров не помешали бы.
Ждем продолжений от laszlo...

This is only Program without key floppy image.

hello,
@ dekor: here was a crack for analyzer 5, and on Cvalka , but now its disapear, i dont know why? because it works.

See about problem in Cvalka viewtopic.php?p=9722#9722

Hello,
@ dekor: please wait for for the new crack with all drivers for plc analyzer, the old crack is only for s5 s7 abb and omron, the new is for all plc's, and you need the update from autem, "before long" means "coming soon"
thanks to the admin for help
i think everybody how need this programm every day buy it, but for home use and try it out....

directory Simatic
ab_driver_tcp_1.dll
Autem Driver 5.0.3


s7_driver_ethernet_1.dll
Autem Driver 5.0.4


or (because new problems in CVALKA)

PLC_Analyzer_drivers.rar

I have a question.

In Readme standing: svcrypt.dll, syczpia.dll, but in File be called syczpia.sys.
Must i rename this File? (I try both)

In Readme standing: Run update 5.1.1 - but i found only 5.1.2. Is this a problem?

If i start the Programm, there was a error message (in german): Bitte legen Sie die Schlüsseldiskette ein oder schließen Sie den Dongle-Key an!

Can someone help me?

Update version 5.x --> 5.1.1
rapidshare PLC_ANALYZER_up_511.zip

All has turned out.
It has appeared not so difficultly as it seemed

Russian wrote:Все получилось. Оказалось не так сложно, как казалось

Thanks

Thanks for 5.1.1, but the same Problem. (Uninstall before)

I try it on a Virtual PC 2007 XP Pro.

it works without error message on the "normal" PC.

qwe911 wrote:Hi, everyone,
Anybody have ANALYZER PRO5 for S7 MPI/Profibus driver? Could you share it? Thanks!!

S7driver+etc..:
rapidshare PLC_Analyzer_crack_sys_dll.rar
Very good!!

Today I install the Update 5.1.2 and it works

regards

does anyone have the modbus (serial / ethernet) driver ?
Modbus is used by telemecanique and modicon PLC's...

monty

Juli wrote:Today I install the Update 5.1.2 and it works

regards

Update 5.1.3 works.Very Good!!

Hy!

New update(5.1.4)!-->new driver :PILZ

Please Share PLC Analyzer Crack in Non-Rapid Share Link.

here you have it:

mediafire
Regards

Update 5.1.4 OK!!

Link

http://www.autem.de/download/up_514.zip

Salut

MeDoK!

Hi!

Pilz driver for autem5 ver.(5.1.0)

100.25 KB

regards

thanks for sharing

i need driver for:
SPS-Treiber Schneider Modicon TSX Quantum / Momentum / Compact - Modbus Plus
SPS-Treiber Schneider Modicon TSX Quantum / Momentum / Compact - Modbus TCP/IP
SPS-Treiber Schneider Modicon TSX Quantum / Momentum / Compact - Modbus I
SPS-Treiber Schneider Modicon TSX Premium / Atrium / Micro / Nano - TCP/IP / Uni-Telway
SPS-Treiber Schneider AEG TSX A250 / A120 / Micro - PG-Schnittstelle (KS)

hello,
i'am looking for driver mitsubishi and ad_usb_box.

Hi,
Anybody have Beckhoff TwinCAT I/O driver? Could you share it? Thanks!!

Hi!!

New driver 5.2.0 :Works!!!

Does anybody have the driver for "Beckhoff TwinCAT I/O"
I use S5, S7 , PILZ and Beckhoff, now only need driver for Beckhoff,
please help.
I can help to calculate the twincat key till "NCI" if someone send me that.

Little_Cat wrote:Beckhoff TwinCAT I/O driver?

Hi!

Autem Beckhoff TwinCat I/O driver 5.2.0:

for russian users
119.71 KB

Works beckhoff driver??!!

Please help: i am search save2pc pro full version program(private message)

Merry Christmas!

2008 new year-->new driver!

Happy New Year!

*Leslie THE KING*

Hi!

Autem Beckhoff TwinCat I/O driver 5.2.0:

I can't download.
Please help me.
Thank you very much!

DimonS wrote:ed2k://|file|[Full].save2pc.full.with.Bonus.zip|2058151|D98CB910473C43C2390F95A7A00A6F88|/

Thank You DimonS!!!...This file VIRUS!!..

Please help!!

Thank you Gorky75@!!!!!

Merry Christmas!

Hi there,

everytime I try to "unpack" the file PLC_Analyzer_sys_dll.rar i get a message from WINRAR that the HEAD of the file is broken or damaged...can anybody advise me...
I have installed the plc-analyzer5 but it ask for a valid lizens.....

Hope there is some help for me...

Peter

I have downloaded and unpacked without problems



Try ZIP
rapidshare PLC_Analyzer_crack_sys_dll.zip

Today it worked...but the files size was much bigger then yesterday....

BUT IT WORKED :_)

Thanks

Need AD_USB-Box driver for Anapro 5

Thx in advance.

Hy!

New update 5.3.0=>OK!!!

http://www.autem.de/download/up_530.zip
21 MB

Hello,everyone! I am a freshman,I need driver for mitsubishi ,does someone help me ! I can share some document about PLC.

I can't download File "Pilz driver for autem5 ver.(5.1.0)" from
Pls help me!
thanks very much~

Garog wrote:thanks for sharing

i need driver for:
SPS-Treiber Schneider Modicon TSX Quantum / Momentum / Compact - Modbus Plus
SPS-Treiber Schneider Modicon TSX Quantum / Momentum / Compact - Modbus TCP/IP
SPS-Treiber Schneider Modicon TSX Quantum / Momentum / Compact - Modbus I
SPS-Treiber Schneider Modicon TSX Premium / Atrium / Micro / Nano - TCP/IP / Uni-Telway
SPS-Treiber Schneider AEG TSX A250 / A120 / Micro - PG-Schnittstelle (KS)

I need these drivers too
Can maybe Lesie The king post these ?

thx

Is there already a Crack for PLC-Analyzer 5.3.1 ???

Or do I have to install the older version?

I am Waiting for the "all drivers" Crack, but it doesn't exist!
Who have uers&password for "ftp.cvalka.net/"?

Hello,
need one for "CoDeSys".

Thanks

this program and the same old commlite ie
it's also the password to see if CLP

Freezer86 wrote:Is there already a Crack for PLC-Analyzer 5.3.1 ???

Or do I have to install the older version?

Yes.
install the V5.x
add the crack
make the upgrade 5.3.1

every thing is OK

I tryed that in a virtual pc by vmware, but it doesn't work.
The sortware doesn't work with the origignal key too.
I think it is a problem with vmware.

Thanks for this program.
Please can you uploade the driver for mistsubishi FX series.
Thanks alot

please, i would like to find drivers for plc telemecanique premium.
Do you have it?

thank you very much

As I wanted to test this software before we bought it, I installed the software from this forum including the keys for Autem PLC analyser driver.
It worked very good (I even did the upgrade to version 5.3 without any problem).

We now purchased an official version of Autem PLC analyser,
but it is impossible to uninstall the pathced software from this forum
(software keeps asking to remove Autem PLC analyser keys first,
but I have no way of doing this).
I tried to move the Autem PLC analyser keys to the USB license key,
but then I get the error

"maximum allowed licenses reached"

.
I installed all the Autem PLC analyser keys I could find on this forum
(although I only needed the Siemens ones!?),
but we only bought Siemens licenses,
so even if I could move the keys to the purchased USB key, my problem would still not be resolved.

I already installed the software of this forum on another pc
(to log what changes are made to the registry and on the hard drive, to try if removing the WIBU-key software would help, to install the purchased software over the patched one,.. ),
and tried to manually remove files hoping the keys would be removed also, but so far without success.

I found out some hash files are added in the system32/catroot and system32/drivers that are linked to the keys, but removing them only causes an error but does not resolve my problem...

Does anyone has any clue (without formatting the hard drive...) to get these patched keys back of my pc so I can install the official ones?

Any help would be really appreciated!

The keys for Autem PLC analyser driver.

I also tried to install this software in a virtual machine (XP SP3 in VM Ware workstation).

When I open the Autem "licence key management", I can see all the licences from this forum. However when you try to start the program, an exeption is thrown "Please insert key disk or connect key-dongle to your computer".

I guess the patch does not work on a virtual pc for some reason...

Hi

Have anybody Driver for CoDeSys ?


Please share it.


Thanks

I'M NOT ABLE TO INSTALL THE LICENSE KEY

SOMEONE CAN HELP ME?

TANKS A LOT
LORENZO

yeah
On desktop PC, PLC analyzer it is OK.
On laptop PC, when I run the program by double click on icon, nothing happens..progam does not open.

All License seem to be pesent on PC and updated to 5.3.1 version.

Any idea?

Thank's a lot

I've no problems on laptop. I think it may happend if you have Vista OS, check settings for this application (set administration rights or WinXP compatible mode).