SIMATIC S7-300 training kit not working.
PLC doesn't go to RUN mode, and still in STOP mode all the time.
STOP mode led is blinking every 1 second, even when I press MRES key.
This is a video I recorded for issue demonstration:
https://youtube.com/shorts/ISMPH_zNuG4
SIMATIC S7-300 training kit STOP LED blinking
-
wolfrose
- Posts: 6
- Joined: Wed Feb 16, 2022 9:03 pm
-
roberto_battistella
- Posts: 71
- Joined: Wed Sep 01, 2010 10:20 am
Re: SIMATIC S7-300 training kit STOP LED blinking
fai la cancellazione totale AG (da Simatic Manager)
-
wolfrose
- Posts: 6
- Joined: Wed Feb 16, 2022 9:03 pm
Re: SIMATIC S7-300 training kit STOP LED blinking
But the PLC can't connect to PC.
-
CoMod
- Site Admin
- Posts: 3977
- Joined: Thu Feb 16, 2006 3:25 pm
- Location: Russia
Re: SIMATIC S7-300 training kit STOP LED blinking
Run "Setting PG/PC interface"
Select your adapter (MPI Auto or Profibus Auto)
Diagnose connection - Speed and Adress
if
Check cable connection and Terminator "On"
Select your adapter (MPI Auto or Profibus Auto)
Diagnose connection - Speed and Adress
if
Check cable connection and Terminator "On"