Siemens TI545

SIMATIC S7-200/300/400, Step7, PCS7, CFC, SFC, PDM, PLCSIM,
SCL, Graph, SPS-VISU S5/S7, IBHsoftec, LOGO ...
Post Reply
Posts: 1
Joined: Thu Mar 01, 2018 8:21 am

Siemens TI545

Post by niksiz » Thu Mar 01, 2018 8:32 am

Hi all,

I have a problem with a TI545.
I see this model for firs time and have some questions about it.
First I need a software for it. I have found that TIsoft is obsolete.
Does someone have it? Or any other software?
Second question is about hardware.
PLC was without power for about six monts. After applying power BATT GOOD light went ON.
PLC GOOD and RUN leds were OFF.
I have tryed to reset by switching off the battery.
After this PLC GOOD also went ON.
But RUN is still OFF.
How to make it to go to RUN mode.
If I am not wrong the program can not be erased because battery is working, right?

Posts: 1
Joined: Fri Oct 03, 2014 2:46 am

Re: Siemens TI545

Post by destroy13 » Wed Apr 11, 2018 7:16 pm

I use PLC WorkShop Suite for Siemens 505 from Fastrak. RUN issue is probably due to current program...

Post Reply