Page 1 of 1
unable to connect to a ethernet network
Posted: Tue Jul 11, 2017 12:06 pm
by raduadragos
Hello all, I have a problem and maybe you could help me...I want to connect to a internal network of a plc which is connected via a switch...I connected via my Ethernet connection but still I cannot see the Ethernet nodes, I changed the pg/pc interface in several way but still nothing...could you give me some tips...preferably step by step.
Re: unable to connect to a ethernet network
Posted: Tue Jul 11, 2017 7:09 pm
by Lucas_Corso
Sometimes, the problem is that your pc is not in the same range of IP that your PLC.
Check first this in Control Panel in your PC. For example, if your PLC has the IP: 192.168.1.20 your PC must be in same range, 192.168.1.xx
Re: unable to connect to a ethernet network
Posted: Wed Jul 12, 2017 12:34 pm
by Dfcz
What is the axis (OS)?
Re: unable to connect to a ethernet network
Posted: Fri Dec 01, 2017 3:59 pm
by AlekMalek
The problem could be in DNS-server that conflicts with your pre-installed IP of PLC.