The version of S7-PLCSIM Advanced supports the following SIMATIC CPU series:
● S7-1500, S7-1500F, S7-1500C, S7-1500T and S7-1500TF v2.0 only (not work with v2.1)
● ET 200SP and ET 200SP F
S7-PLCSIM Advanced V1.0 does not support the simulation of the following CPUs:
● S7-1200 CPUs
● ET 200pro, ET 200pro F CPUs
● ET 200SP Open Controller CPU 1515SP PC
● Software Controller
Communication
S7-PLCSIM Advanced supports communication via Softbus or TCP/IP.
S7 PLCSIM Advanced enables C++ and C# programs and simulation software to access
SIMATIC CPU series supported by S7-PLCSIM Advanced via the user interface (API).
S7-PLCSIM Advanced and S7-PLCSIM V14 (for S7-1200 and old S7-1500 v1. cannot be installed on the same PC or the same virtual machine.
The communication between the two applications cannot be simulated.
S7-PLCSIM V5.4 SP8 is automatically installed with S7-PLCSIM Advanced.
The communication between the two applications can be simulated.
===============================
S7-PLCSIM V14
The version of S7-PLCSIM supports the following SIMATIC CPU series:
● S7-1200 and S7-1200F
● S7-1500, S7-1500F, S7-1500C, S7-1500T and S7-1500TF
● ET 200SP and ET 200SP F
Communication
S7-PLCSIM V14 supports communication via Softbus.
S7-PLCSIM V14 and S7-PLCSIM Advanced cannot be installed on the same PC or the same virtual machine.
Прояснилась ситуация с этим расширенным отладчиком - работает только со старыми версиями S7-1500 v2.0...
то есть в проекте надо заменять процессор на версию 2.0
The firmware within PLCSIM Advanced correlates with the firmware 2.0 of a PLC S7-15xx with firmware 2.0.
The download of a PLC with newer firmware versions > firmware 2.0 will end in an abortion of the download.
https://www.youtube.com/watch?v=Ird0ArHtMC8