unidrive sp_two motors digital lock/frequency slaving

SIMATIC S7-200/300/400, Step7, PCS7, CFC, SFC, PDM, PLCSIM,
SCL, Graph, SPS-VISU S5/S7, IBHsoftec, LOGO ...
Post Reply
honey361
Posts: 7
Joined: Fri Sep 16, 2011 5:36 pm

unidrive sp_two motors digital lock/frequency slaving

Post by honey361 » Sun Oct 09, 2016 5:30 am

Hi,

Can you help, I am trying to synchronize two motors with resolver as digital lock, ( With out sm-application)

Synchronization two servo motors with resolver feedback.
MASTER DRIVE SLAVE DRIVE
0.05 A1-A2 0.05 PRC
0.022 ON 0.022 ON
0.023 200 0.023 200
1.18 3000 1.18 3000
1.20 ON 1.20 ON
1.44 ON
3.22 3000 3.22 3000
3.23 ON 3.23 ON
3.40 0 3.40 0
17.24 0.10 17.24 0.10
17.25 0.2500 17.25 0.2500



BUT Slave Motor is not running, where is I am wrong
Thanks in Advance

proeng
Posts: 32
Joined: Wed Aug 18, 2010 2:01 pm

Re: unidrive sp_two motors digital lock/frequency slaving

Post by proeng » Mon Oct 10, 2016 7:12 pm

honey361 wrote:Hi,

Can you help, I am trying to synchronize two motors with resolver as digital lock, ( With out sm-application)

Synchronization two servo motors with resolver feedback.
MASTER DRIVE SLAVE DRIVE
0.05 A1-A2 0.05 PRC
0.022 ON 0.022 ON
0.023 200 0.023 200
1.18 3000 1.18 3000
1.20 ON 1.20 ON
1.44 ON
3.22 3000 3.22 3000
3.23 ON 3.23 ON
3.40 0 3.40 0
17.24 0.10 17.24 0.10
17.25 0.2500 17.25 0.2500



BUT Slave Motor is not running, where is I am wrong
Thanks in Advance

slave motor is continuous start.
SM-Resolver manuel,
http://www92.zippyshare.com/v/jgUEBMLO/file.html

Post Reply