plcforum.uz.ua

International PLC Forum
It is currently Thu Nov 23, 2017 6:07 pm

All times are UTC + 3 hours


Forum rules


Please click here to view the forum rules



Post new topic Reply to topic  [ 69 posts ]  Go to page Previous  1, 2
Author Message
PostPosted: Tue Aug 08, 2017 1:37 pm 

Joined: Sat Aug 05, 2017 10:37 pm
Posts: 2
For rework the SIA2.ini test this one:

open Sia2.ini and delete from [TERM] to [1033], sucess in win10 x64

it works on WIN10 64 bit and on Windows Server 2016 64bit


Top
 Profile  
 
PostPosted: Tue Aug 22, 2017 4:26 pm 

Joined: Tue Apr 06, 2010 3:54 am
Posts: 7
scout V5.1
:mrgreen:

SIMOTION SCOUT V5.1 HF1
https://support.industry.siemens.com/cs ... _1_0_1.exe
https://support.industry.siemens.com/cs ... _1_0_1.001
https://support.industry.siemens.com/cs ... _1_0_1.002
https://support.industry.siemens.com/cs ... _1_0_1.003
https://support.industry.siemens.com/cs ... _1_0_1.004
https://support.industry.siemens.com/cs ... _1_0_1.005
https://support.industry.siemens.com/cs ... _1_0_1.006
https://support.industry.siemens.com/cs ... _1_0_1.007
https://support.industry.siemens.com/cs ... _1_0_1.008
https://support.industry.siemens.com/cs ... _1_0_1.009
https://support.industry.siemens.com/cs ... _1_0_1.010
https://support.industry.siemens.com/cs ... _1_0_1.011
https://support.industry.siemens.com/cs ... _1_0_1.012
https://support.industry.siemens.com/cs ... _1_0_1.013
https://support.industry.siemens.com/cs ... _1_0_1.014
https://support.industry.siemens.com/cs ... _1_0_1.015
SIMOTION SCOUT Stand-alone V5.1 HF1
https://support.industry.siemens.com/cs ... _1_0_1.001
https://support.industry.siemens.com/cs ... _1_0_1.002
https://support.industry.siemens.com/cs ... _1_0_1.003
https://support.industry.siemens.com/cs ... _1_0_1.004
https://support.industry.siemens.com/cs ... _1_0_1.005
https://support.industry.siemens.com/cs ... _1_0_1.006
https://support.industry.siemens.com/cs ... _1_0_1.007
https://support.industry.siemens.com/cs ... _1_0_1.008
https://support.industry.siemens.com/cs ... _1_0_1.009
https://support.industry.siemens.com/cs ... _1_0_1.010
https://support.industry.siemens.com/cs ... _1_0_1.011
https://support.industry.siemens.com/cs ... _1_0_1.012
https://support.industry.siemens.com/cs ... _1_0_1.013
https://support.industry.siemens.com/cs ... _1_0_1.014
https://support.industry.siemens.com/cs ... _1_0_1.015
https://support.industry.siemens.com/cs ... _1_0_1.016
https://support.industry.siemens.com/cs ... _1_0_1.017
SIMOTION SCOUT TIA V5.1 HF1
https://support.industry.siemens.com/cs ... _1_0_1.exe
https://support.industry.siemens.com/cs ... _1_0_1.001
https://support.industry.siemens.com/cs ... _1_0_1.002
https://support.industry.siemens.com/cs ... _1_0_1.003
https://support.industry.siemens.com/cs ... _1_0_1.004


Top
 Profile  
 
PostPosted: Fri Aug 25, 2017 4:18 pm 

Joined: Fri Aug 25, 2017 3:28 pm
Posts: 5
Does anyone got the Simatic Net PC Software V14 for sharing?

Thanks in advance.


Top
 Profile  
 
PostPosted: Fri Aug 25, 2017 9:11 pm 
Site Admin

Joined: Thu Feb 16, 2006 6:25 pm
Posts: 3056
Location: Russia
DouglasFG wrote:
Does anyone got the Simatic Net PC Software V14 for sharing?

"SIMATIC NET PC Software V14 SP1" is a part of PCS7 v9.0 viewtopic.php?f=1&t=25324
38_SIMNET_PCSW__V14+SP1 folder
Image

or need it ?
Image


Top
 Profile  
 
PostPosted: Fri Aug 25, 2017 11:04 pm 

Joined: Fri Aug 25, 2017 3:28 pm
Posts: 5
Cool, can you send me a copy?


Top
 Profile  
 
PostPosted: Fri Aug 25, 2017 11:07 pm 
Site Admin

Joined: Thu Feb 16, 2006 6:25 pm
Posts: 3056
Location: Russia
DouglasFG wrote:
Cool, can you send me a copy?
Torent or Mega.nz ?


Top
 Profile  
 
PostPosted: Sat Aug 26, 2017 4:39 am 

Joined: Fri Aug 25, 2017 3:28 pm
Posts: 5
I prefer torrent. Can you send only Simatic NET?


Top
 Profile  
 
PostPosted: Sat Aug 26, 2017 10:07 am 
Forum Community
Forum Community

Joined: Sat Oct 21, 2006 12:29 am
Posts: 1052
Location: We are anonymous users. We do not read your private messages :( Ask questions in the forum !
Simatic Net PC Software v14
https://mega.nz/#F!UXhzXYiA!sz-4URADqdmMfoBpA8NBBQ

"SIMATIC NET PC Software, Edition 2008 + SP6" = SIMATIC NET PC Software v7.1 SP6
https://mega.nz/#F!gOYmWJ6Z!pCuVfjTDFBTZgFcA5wpw4w


Top
 Profile  
 
PostPosted: Sat Aug 26, 2017 4:06 pm 

Joined: Fri Aug 25, 2017 3:28 pm
Posts: 5
Thank you very much. (clap) (clap)
I need install the Simatic NET v2008 SP6 before?
Can to install the Simatic NET v14 only?


Top
 Profile  
 
PostPosted: Sat Aug 26, 2017 4:27 pm 
Site Admin

Joined: Thu Feb 16, 2006 6:25 pm
Posts: 3056
Location: Russia
you need read Readme.html (rr)


Top
 Profile  
 
PostPosted: Mon Aug 28, 2017 6:48 am 

Joined: Fri Aug 25, 2017 3:28 pm
Posts: 5
Thanks, I was able to install along with my TIA V14 SP1.

How can I upgrade the NET to SP1?


Top
 Profile  
 
PostPosted: Thu Sep 07, 2017 9:59 pm 
Forum Community
Forum Community

Joined: Mon Apr 12, 2010 1:59 pm
Posts: 307
(sdown) Where do you procure the current trial software for the products in the TIA Portal STEP 7 V14, WinCC V14 and Startdrive V14 including the respective SP1?
https://support.industry.siemens.com/cs/ww/en/view/109740201


Top
 Profile  
 
PostPosted: Tue Sep 19, 2017 11:44 am 

Joined: Tue Jun 07, 2016 12:49 pm
Posts: 2
Tenzing-Moagei wrote:
For rework the SIA2.ini test this one:

open Sia2.ini and delete from [TERM] to [1033], sucess in win10 x64

it works on WIN10 64 bit and on Windows Server 2016 64bit


I tried this step in win7 ultimate x64 but the runtime cannot make a connection to the PLC, do you know why? The error code shows 4104. Or it can only be used in win10?


Top
 Profile  
 
PostPosted: Fri Sep 29, 2017 6:49 pm 
Forum Community
Forum Community

Joined: Mon Apr 12, 2010 1:59 pm
Posts: 307
Updates for STEP 7 V14 SP1 and WinCC V14 SP1
https://support.industry.siemens.com/cs/document/109747387/updates-for-step-7-v14-sp1-and-wincc-v14-sp1
https://support.industry.siemens.com/cs/document/109747394/updates-for-wincc-runtime-professional-v14-sp1
https://support.industry.siemens.com/cs/document/109747415/updates-f%C3%BCr-wincc-runtime-advanced-v14-sp1
https://support.industry.siemens.com/cs/document/109747395/updates-for-tia-portal-teamcenter-gateway-v14-sp1
https://support.industry.siemens.com/cs/document/109748902/updates-for-tia-portal-multiuser-engineering-v14-sp1
https://support.industry.siemens.com/cs/document/68034568/sinamics-startdrive


Top
 Profile  
 
PostPosted: Fri Oct 27, 2017 1:41 pm 

Joined: Tue Apr 14, 2009 9:46 am
Posts: 2
Location: Europe
Hi all,

I`m looking for STARTDRIVE V14 SP1 S120. 6SL3072-4EA02-1XG0


Top
 Profile  
 
PostPosted: Fri Oct 27, 2017 1:43 pm 
Faq & Info
Faq & Info

Joined: Wed Oct 05, 2005 12:00 pm
Posts: 359
ventill wrote:
I`m looking for STARTDRIVE V14 SP1 S120. 6SL3072-4EA02-1XG0

(sfaq) https://support.industry.siemens.com/cs/document/109746259/delivery-release-sinamics-startdrive-v14-sp1
(sdown) https://support.industry.siemens.com/cs/document/68034568/sinamics-startdrive


Top
 Profile  
 
PostPosted: Sat Oct 28, 2017 9:40 am 

Joined: Tue Apr 14, 2009 9:46 am
Posts: 2
Location: Europe
Info wrote:


Unfortunately this is just for Sinamics G family. I need software option for S120 (servo drive) (sos)
https://support.industry.siemens.com/cs/products/6sl3072-4ea02-1xg0/startdrive-v14-sp1-s120-download?pid=810695&dtp=Download&mlfb=6SL3072-4EA02-1XG0&mfn=ps
Quote:
6SL3072-4EA02-1XG0
STARTDRIVE V14 SP1 S120 DOWNLOAD
SOFTWARE-DOWNLOAD STARTDRIVE V14 SP1 S120 OPTION ENGINEERING- AND COMMISSIONG TOOL FOR SINAMICS S120 DRIVES.
GERMAN, ENGLISH, SPANISH FRENCH, ITALIAN AND CHINESE (SIMPLIFIED) INCLUDING SINGLE LICENSE

(sfaq) https://support.industry.siemens.com/cs/document/109746442/delivery-release-sinamics-startdrive-v14-sp1-s120-option
Quote:
SINAMICS Startdrive V14 SP1 S120 Option is now available for delivery. The product release is restricted. Please contact your SIEMENS personal contact before ordering.


Top
 Profile  
 
PostPosted: Sun Oct 29, 2017 1:50 pm 
Forum Community
Forum Community

Joined: Sat Oct 21, 2006 12:29 am
Posts: 1052
Location: We are anonymous users. We do not read your private messages :( Ask questions in the forum !
SIMATIC NET PC Software V14 SP1
https://rutracker.org/forum/viewtopic.php?t=5472949

WinCC Runtime Professional v14 SP1
https://rutracker.org/forum/viewtopic.php?t=5472375


Top
 Profile  
 
PostPosted: Fri Nov 03, 2017 10:24 am 
Forum Community
Forum Community

Joined: Mon Apr 12, 2010 1:59 pm
Posts: 307
(sfaq) https://support.industry.siemens.com/cs/document/109749283/what-are-the-incompatibilities-between-windows-10-update-and-wincc-(tia-portal)
Quote:
Loading the Windows update might impair the function of the software.

Note on the Windows 10 Update Version 1703
As part of the Windows 10 Update, Microsoft.Net Framework 4.7 is either installed as part of the update Version 1703 or installed manually.
The Version Microsoft.Net Framework 4.7 is not compatible with

WinCC (TIA Portal) V14 and V14 SP1.
WinCC (TIA Portal) V13 SP2.

Instead you use Microsoft.Net Framework Version 4.6.2.

Remedy
Proceed as follows if .Net Framework V4.7 is already installed.

Uninstall .NET Framework V4.7 via the Control Panel on your computer.
Install .NET Framework V4.6.2. (Download)
Recompile your project with "Rebuild all".


Important note on Windows 10 Update Version 1709 "Fall Creators Update"
After installing Windows 10 Version 1709 "Fall Creators Update", there are currently problems with the installation and operation of WinCC (TIA Portal) V13 SP2, V14 and V14 SP1.
You should therefore currently avoid or delay under all circumstances the installation of this update for Windows 10 systems with WinCC RT Professional. Work is already being done on the topic and we will inform you accordingly


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 69 posts ]  Go to page Previous  1, 2

All times are UTC + 3 hours


Who is online

Users browsing this forum: Google Feedfetcher and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by International PLCforum® Forum Software © PLCforum
Mobile version